US 110V 10A 1CH Relay 2 4-key wireless RF Control Switch Transmitter+4 Receiver (433MHz)

Description

Color Name:433MHz Specification: 1.Transmitter Operating Voltage: DC12V Operating Current: 6MA Operating Frequency: 315 MHz/433MHZ Frequency Distance: 50 meter(open) in theory, 10%-50% in reality(In open environment,receiver antenna outside the box) 2.Receiver Channel: 1CH Decode: Learning code (jog/Non-Latched .inter-lock/Latched .self-lock /Self-Latched) Working Voltage: AC 110V Output Current: 10A Rated load:10A 110V Receiver Sensitivity: -105dBm Working temperature : -40\'C - +80\'C Size : 55*30*18mm Output way : Jog, Inter-lock, Self -lock is Adjustable Working/output way: Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control. Learning and removing method: 1 .There is a learning button on the control panel of touch switch, the button is used to learn and remove the code. 2 .Press and hold the learning button for three seconds.When the indicator light flashes ,we enter the learning state. Press any key on the remote controller to emit signal, the light flashes two times and off .It means you learn it successfully. 3 .It can learn more than 12 PCS 2262 or 1527 chip with the different codewireless remote controller. 4. Delete remote control method: hold down the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted. Packing list: 4 x Receiver 2 x Transmitter (With Battery)