Ensenior 12 Pack 4 Inch Ultra-Thin LED Recessed Light with Junction Box, 2700K/3000K/3500K/4000K/5000K Selectable, 9W 75W Eqv, Dimmable, 750LM High Brightness - ETL & Energy Star Certified

I recently installed drop ceiling tile covers in our basement to replace/hide those old chalky ones and also replaced old can ceiling lighting which used a big metal housing above the tile.These lights are lightweight, the wiring is easy to connect into the junction box provided and it's literally plug and play. When connecting the wires to the adapter inside the junction box, turning the adapter clockwise while pushing the wire inside makes it very easy. It's in the directions but I didn't read them so it ook me a few times to figure out why the connections weren't holding. To remove the wire, you can't just pull out. You turn counterclockwise while pulling the wire out. Quite simple actually.There is a circle template provide to make exact cuts in the ceiling for the light to fit securely. In my case, to cut holes in the drop ceiling tiles, I bought a Goldblatt G05141 drywall circle cutter and set it to match the dimensions of the circle template. Easy peezy.For every tile covered, I put the old chalky tile on top. For the ones with a light, the chalky board rests on top as well but I didn't attach the light fixture to the chalky board and instead attached to the tile cover itself. The cover is thin plastic so when attached to the old board, the light would press up causing an indention in the plastic tile. The fixtures are light enough to where I attached them to the plastic tile itself using a piece of regalar cardboard for the fixture springs and it doesn't droop. For the junction box, I just placed that on top of the old tile. Hope that made sense.Some reviewers said the lights didn't dim enough. I bought a Lutron DVCL-153P-GR LED+ dimmer switch with a Lutron Claro cover. I don't know if the switch is on the compatibility list or not but there is no buzzing etc. It works great. Inside the switch, there is a dimming adjust "knob". In some rooms, I moved it to the lowest setting and it's very dim with the slider moved to the bottom and bright enough with the slide moved all the way up. For example, when I start my day in the home office, I turn on the lights at very dim and then gradually slide up during the day. For other rooms, I start out at the brightest setting. It's a very nice feature on that switch.For color of light. I'm glad I chose at least 3 options (3/4/5K). I chose to use 4K which I think is a nuetral light. 5K was a bit too harsh and 3K a bit to yellow for my taste. I think if I purchased the fixture with more options, I'd have a hard time making a decision. Lol. The cool thing is that you can easily change the color temp at any time. Example: I'm not sold on the neutral light in a bathroom so I may move the switch to 3K.The lights are more than bright enough and cover a good amount of area.For Customer Service. I cannot say enough kind things about them. One of my lights was missing a spring. The lights come with 2 springs attached to the light. In most cases, especially mine, you need both springs to securely attach the lights to a ceiling. I emailed support, they responded very, very fast. I explained my situation and they sent me out a replacement fixtuee immediately. I don't often get fast responses or resolution from many companies unfortunately.I recently bought an additional 4 pack of these same lights to finish up another room. No issues, they work great just like all the others.It's amazing how much easier these are to install vs those big metal can light fixtures.Hope this review helps others.

First review ever made, just to let everyone know that I'm amazed on how easy these lights are to install and how bright they are, took me less than 2 hour to cut the holes and run the wires to install 8 of these lights in my garage (excuse the mess). I'm going to definitely buy more and install them around my house!

2nd time we have purchased these lights for a project. The plug in wires are so easy and quick to use. We had ordered a set of 4in and 6in lights. The junction boxes are not adaptable just fyi.

Cost was good. Less expensive than box store lights when they go on special with no shipping charges

I recently took on the task of installing ceiling recessed lights, and for the most part, the process was incredibly straightforward.The installation kit came with all the necessary components, and the instructions were user-friendly, catering even to someone like me who isn't a wiring expert.Once the lights were up and running, the atmosphere they created was impressive. The room was transformed into a cozy space with a modern touch, and I couldn't help but feel a sense of accomplishment.In a nutshell, these ceiling recessed lights make installation a breeze, but be prepared to seek some wiring guidance if you're just starting out. These lights offer a stylish upgrade to your space and a rewarding installation experience overall.

Super easy to install. I have a suspended ceiling with 2x4 tiles so I got pretty lucky with measuring and cutting the holes. I daisy chained 8 on one switch with out an issue, just simple plug and go. I will be getting more to install in other rooms in the future.

Love it! I will buy more!

Amazing quality for that price, third time ordering!

We had to get the wiring installed first. Take the plastic tabs off so they are easier to mount light and then it fits snug on the ceiling. Great light. My house has never had so much light. Great product.

Super simple install. The hole cutting template was a nice touch. Installed a dozen in just over an hour including removal of the old pot lights. Super easy wiring connector came with the new boxes, very plug and play! Nice bright lights, and Dimmable feature was nice.

Bien conçu facile d'installation j'aime le choix entre 3 couleurs (blanc chaud, moyen et froid)

I love this lights. Make me very happy. Excellent quality. This lights are my beat purchase in 4 years to be honest. The best of the best. Look amazing. Thank for for those lights.

I had originally posted a somewhat negative review of these lights as I felt the color temperature was slightly on the warm side.Following that review, I was really surprised that the Ensenior Customer Support Team reached out to me to help resolve my concerns. The staff were extremely understanding, courteous and helped resolve my issue. I have updated my review accordingly.The light fittings themselves are well made and feature a foam gasket for damp locations. The driver/ junction box is smaller than what I am used to and feature three inlet knock-outs.You do need to add your own cable glands/ ferrules. I used the plastic variety. The internal wires come pre-wired to a 4-junction push-fit connector consequently leaving space for 3 extra terminations per connector.Unlike some other reviewers, I had no trouble fitting in three 14/2 NMD 90 cables into the junction box. I think the trick is to have ~ 3” stripped length and allow these wires to curl around the box with the internally provided wires such that the connectors do not sit on top of each other.I have paired these lights with a Gosund DS1 Alexa dimmer switch and this seems to work well.I will post a photo of the finished install once my room is fully renovated