Extra Large XL Gloves Facial Tissue Box Holder, Wire Rack Dispenser - Mounting Accessories Included - Holds up to 2 Boxes - Perfect for Lab, Food Service and Home

I use a large quantity of nitrile gloves in my small engineering workshop and this unit simplifies both accessing and storing my gloves.The unit comes as a simple steel frame with a white powder coating finish.Taking standard boxes of nitrile gloves the unit provides clear and easy access to any inserted boxes of gloves, but could also be used for tissues or similar.The wire frame appears to be solidly welded and gives the impression it will last for a long time in constant use.Supplied with two screws and two plastic wall plugs for fitting into walls.I received the triple unit meaning that I can have small, medium and large gloves available.Good value for such a handy unit!

Review of Gloves Box Facial Tissue Box Holder,Wire Rack Dispenser,A basic item for everyday use, a wire dispenser to hold boxes of disposable gloves, tissues and paper towels amongst others, yet this box holder a lot larger than most retail boxes of dispensed items, the box holder aimed at user versatility yet at 300m wide seems more for the commercial market than retail user sector.However it is a rigid wire frame 300mm wide by 100mm in depth, the rack chosen to hold two boxes at the same time is 240mm high, wall fixing via three screws through a single top to bottom central wide bar at the rear, It is white in colour appearing to be powder coated all overIt does appear that with most retail disposable gloves purchased the cardboard packaging boxes received are to small for this wire rack and whilst retained do float around quite a lot, not really a problem, more annoying and visually imperfect, one has looked on line for boxed items to fit this rack but the right size retail boxes do seem elusive.This dispenser works as advertised and solid in construction yet by no means perfect in size for retail market products to fit within.

I ordered this item as it said it was suitable for boxes of gloves, which we use a lot of around our factory.When it arrived I was a little disappointed with it's very simple design.It is made from plastic coated steel wire in a very basic frame arrangement.The good stuff.....it's easy to install and comes with a fixing kit. It will take 3 boxes of whatever you want to dispense. As long as the plastic coating doesn't get damaged it should be pretty durable.The disappointing stuff......this dispenser isn't designed for UK industry standard boxes, in the picture I've attached is a UK standard sized box inside this dispenser and I get these gloves from many different suppliers and they're all in this size box. The box in the picture is also a 200 glove box which is deeper.The box moves from side to side and back and forward which make removing a glove a bit more tricky, not the one handed operation as promised. 100 glove boxes can also slip through the side of the cage, 200 glove boxes don't.Verdict: Unless you're using the TPMax gloves then this dispenser will not be suitable for your normal gloves. It's oversized and no good for most applications.It's also massively overpriced, you can get sturdier and better looking dispensers for more than a tenner less than this unit.I'll find a use for this wire cage but it won't be for gloves, maybe tissues!

Working on cars a lot, I get through many pairs of nitrile gloves - sometimes four or five pairs a day. I therefore buy the boxes of them in bulk, but then they need storage and if the box I'm using gets low, I have to stop, find another box and replace it.I've now go this two-box holder fastened to the wall of my garage with a couple of boxes loaded. This ensures I always have at least one full box of gloves to hand provided I check at the start of each day before I begin work.It's a bit bigger than the boxes of gloves I usually buy, so they move about a bit - not a huge problem though.The holder is simply thick bent wire painted white with a plate running vertically to handle the three screw fixings. The supplied screws and wall fixings are OK, but I chose to use my own since the included ones are simple cross-heads and I prefer posidrive, and this meant I used my own rawl-plugs too.Overall, this is a simple object that does its one job perfectly adequately.

The holder came well packed in a simple and effective box, no signs of damage, well packed etc.I'll start with the one negative, there was one spot where the metal was not painted. I guess it's not stainless steel so could rust, however I imagine that's only a cosmetic issue, and I can't see that being a problem as the holder is over built for what it should typically hold. The uncovered area does not look like a paint chip (see pictures) and is possibly a result a missed area (where it was hung from during the coating process) or perhaps I was just unlucky.I've hung mine in the garage, and have only used 2 of the 4 screws holes, and one would be enough for the weight of 300 gloves or similar, the 2nd is only needed to stop it swinging horizontally. It is indeed heavy duty and I guess in some industrial settings using 4 screws would be preferable.The dimensions displayed on the page are accurate, my gloves have came from a number of sources (not TPmax) and the boxes are different sizes, the holder is easily more than big enough to hold any of them with space to spare. Irrespective of box size the simple design and space makes it's easy to access the gloves etc even if the supplies you have are significantly smaller 300mm length. The same applies with height.Minor niggle of the coating/paint aside it's a holder that does it's job perfectly well. Reflecting on some of the other options that at first I though would look nicer, I also believe this metal famed one is going to be more robust than the acrylic ones on offer elsewhere for significantly more money, while this type will be a buy once, use forever (plastic gets brittle, is easily broken, scratched/dirtied so will need replacing in public facing settings, and will also block access to the supplies you have that are in smaller boxes).Thumbs up.

This glove box holder came in quickly and was well packed. It included two screws and two anchors for easy installation. The metal is sturdy and I have no questions that this will hold up over time. The only drawback for me is it is very large for a box of gloves (I have two different brands and both fit about the same) so I'm cutting a piece of wood to fill the gap in the back to keep the gloves from sliding around too much. The item is exactly what it states though in the description for dimensions so it's more of a personal drawback but easy enough to fix. Definitely happy with the product and love how it helps organize my workspace.

I got this wire rack to act as glove box dispenser rack for a dental office. Rack is large enough to store 2 boxes of gloves horizontally or vertically. There is mounting screws included and the wire rack is white powder coated and very lightweight. Can also be used to hold napkins or Kleenex.

This was easy to attach and holds my glove boxes well. It was an excellent addition to my shop wall.

I have not yet installed this, but I did take a close look at it. The frame is sufficiently rigid to resist excessive flex during normal use. The welds seem sufficient, but I wouldn't go hanging anything heavy from this holder/dispenser. They should be fine for the intended purpose. The steel is coated with what looks like a white enamel to resist corrosion.Only a couple of minor issues to note. The mounting hardware leaves something to be desired, but pretty much everything comes with those cheap drywall anchors. I would recommend a 30lb self-tapping screw style anchor. Also, the boxes can easily move laterally. That also goes for a standard tissue box, as well as glove boxes. This design is clearly so this product can accommodate a wide variety of box sizes. However, this might be annoying to some people. You could always put spacers in it.I will say that this isn't anything special in terms of making it distinctive from other similar products. So, the value is questionable to me, but then I haven't looked too deeply into this market. This product should do the job just fine and seems well made considering its purpose.

This is a simple and nice product, easy to install, no complaints. The only way this could be better is if there was some adjustable aspect to help keep whatever box you put in tight.I will probably find a way to do this as the glove boxes I have are thinner than what this can handle and while still functional, it isn't ideal to have the box loose and easily jiggled around.Overall would recommend, just buy boxes that fit the space better than what I have and you'll have no complaints.