IdeaFormer-3D PEO PET Smooth Build Plate for Bambu Lab X2D X1C X1 X1E P1P P1S P2S A1, PEO PET Spring Steel Sheet Flexible Bed Plate for Bambu Labs X1, X1 Carbon, P1P, P1S, P2S, A1 3D Printer Platform

Initially I had bad adhesion with regular settings when printing petg, I had to increase plate temp setting on initial layer to 85c in my case and then dropped it down to 75c after the 1st layer and my part turned out great.

Opened, unwrapped and went to print. Spaghetti monsters constantly and nothing would adhere. Tried many different settings and nothing worked. EDIT: They reached out and it’s great! Thank you!!

I'm using an X1C and this build plate has given me my first ever print failure. Nothing I do to the print profile or settings will get PLA to stick to the carbon fiber plate, and other filaments are too hot to use on it. The other side works ok even for PLA, but the carbon fiber side is useless, and the carbon fiber design is the only reason I bought this plate. waste of money, time, and filament

This plate has worked so far in my P1S and H1C as needed. It does not have the qr code printed on the plate but it does come with a sheet of some however they do wash away after a few cleanings. For the p1s that doesn't matter as it doesn't scan the qr code but for the h1c it does produce the error to clear out. Not a huge deal but something to note. so far my prints haven't had adhering issues.

Bed adhesion sucks if you dont play with your settings first

I struggled with the rating on this. The sticker used on this is very easily scratched even a plastic scraper will scar this plate. I have to use hairspray with every print not a big deal just a call out. The plate fits the xy dimensions well, but the alignment guide is a fraction to big for my p2s. That being said as long as you don't touch the plate during the print it works fine. I'm going to take my dremel and carve the edges down so it fits properly.

UPDATE: After printing 2 different plates, 1 plate twice (broke off needed pieces removing supports - lesson learned), all prints have completed without any issues. I have yet to re-clean the plate since I started using it. On my 4th print, will clean with soap and water after this. No stringing, warping, or adhesion issues using PEI plate settings. A+ Out of the package: Washed the plate with Dawn soap and warm water, dried and placed on my Bambu Labs A1. Currently printing a CyberBricks remote controller housing on the carbon fiber side, using Overture Matte Gray PLA with a 4mm outside brim and 0.2 gap. So far so good. Will give update if any issues with warp or adhesion. Bed is set at 65°C Extruder at 220°C.

This dual-sided plate is a game changer for my Bambu Lab A1. The PEO side leaves a beautiful, multi-dimensional pattern on the bottom of prints that catches the light brilliantly perfect for decorative items or custom branding. The PET side provides a smooth, sleek finish that rivals professional injection molding. Adhesion is surprisingly strong for a smooth plate, and parts release easily once the spring steel is flexed. It’s a must-have for any maker who wants to elevate the visual hierarchy of their prints.

んーバリがありビルドクオリティは低いですが、用途的には十分使えます。値段を考えれば、まぁギリギリ許せる感じ。