FibroPool 3-Way Diverter Valve - Slip Fit Locking Handle - 1.5 in - PVC | Female Ports, 150 psi Max, ABS Housing, 3 Ports, For Above Ground And Inground Pools, Serviceable Top Access

Worked perfect for our pool pump.

Seems sturdy and easy to use

We have a tankless water heater with a condensate drain line vented to the outside of our house (required by local building code) through our garage wall. When it remains below freezing outside for more than a day the condensate drain line would freeze solid, blocking the drain line which then automatically shuts-off the tankless water heater when the condensate backs-up inside the unit.I had two choices to remedy this problem: 1.) Go outside in the sub-freezing weather on a twice daily basis and chip the ice out of the frozen drain line to allow it to drain, OR 2.) Install this 3-way diversion valve in-line in the condensate drain line inside our garage and simply drain the condensate in to a bucket in our always-above-freezing garage for the few very cold days every year when this is an issue. I chose option 2.) above and it works beautifully!!This is a true-to-size 1.5" PVC slip fitting valve. A 1.5" PVC pipe will fit perfectly inside the valve slip fittings. The valve is very high quality. Push the black handle to "unlock" and change the valve position, as it locks into place in each position.

Worked like a charm.

Nothing wrong with the product. Wayyy more often than not purchases are being delivered a day or more later than original order. As the cost of Prime has increased, quality of service has decreased (delays in delivery, commercial breaks on streaming...)

To soft material

Great price Great product

This is the second pool I’ve used these valves on and I love them. In both cases I’ve used them as diverter valves for solar panels and they are awesome - much, much better than the typical big box store valves. The standard valves can be difficult to turn, so much so that at times you are concerned the handles may snap off. Not so with these diverter valves. They turn easily and lock positively in place, and even though they are probably not designed to do so, they can act as throttling valves e.g. in my case I don’t want full pump pressure going through my solar panels and I have had no problem controlling flow rates with these valves.

Massively reduced bore through them. I measured 30mm, and calculated a potential flow rate loss of 25-35%.

Used this valve to divert the shower water from the house and out of the septic system. Used 1.5 inch ABS plumbing pipe which fit snuggly into this valve but with the ABS glue was no problem to put together. Nice water valve.

it is as described

tres bon produit,transfert se fait facilement contrairement a certain commentaire..

Expect to use some muscle to shift between valves. Otherwise, does the job.