GT600 RGB Laptop Cooling Pad Equipped with Gigantic Turbo-Fan（5.5inch Diameter）,Sealed Foam for Rapid Cooling Gaming Laptop,14.1-19.3 inch Laptop Cooler with 3-Port USB Hub,Dust Filter

This is a premium cooling pad. I had a small issue at first—my laptop is an MSI and it's a bit large, with the fans positioned more toward the top rather than the center. The cooling pad was slightly too big and ended up covering part of the laptop's fans. However, I trimmed a bit of the foam, just enough to avoid blocking the airflow, and it worked perfectly.Before using the cooling pad, my laptop ran at around 50°C on idle (it has an RTX 4080, so it runs hot). Now, with the pad, it stays around 30–35°C. I also tested it with PUBG. Previously, temperatures ranged from 80–95°C, but now they stay between 60–85°C. The temperatures still fluctuate a bit, but the improvement is noticeable.The LED lighting doesn’t bother me—you can adjust the brightness and lighting pattern, which I think is a nice touch. The adjustable metal stand that holds the laptop is also customizable, which I found really useful.Overall, I’m very happy with this cooling pad. I didn’t have to cut much foam, just enough to make sure it didn’t block the laptop’s fans.One downside is the noise. The fans are quite loud, especially at higher speeds. You can run them around 1200–1600 RPM, which helps keep things quieter, but you’ll still hear them even with a headset on. If someone else is in the room, it could definitely be annoying.

Awesome cooling pad, I use it for my Acer Predator Helios 18, I had to cut a bit of the foam for the fan to really reach the inlet and it's perfect, my laptop is huge and I thought it wouldn't fit but it really does and I can even use the stoppers without any problems, while it doesn't necessarily drop the temps since it's an i9, it really helps my laptop to turbo boost longer due to the incredible amount of air it pushes into the laptop with a massive airflow pressure, temps in regular usage drop by a lot and I only have it at 1000 to 1200 rpm (can barely hear it, when playing games I crank it up to 2800 and it almost sound like an airplane about to take off, but I rest assured that my laptop will last longer and that I made a good investment, will buy again as the products from IETS as they keep evolving, IETS is quality, I first bought the competition and it didnt even last me a month before it stopped working and almost burnt a USB port on my laptop, I've had no issues with this GT600 version and had the gt500 version for my smaller laptop, keep temsd low and more importantly I get to protect my investment 100% recommended!!PD: buy a 3mm foam from filter so you can replace the filter once it's too dirty, the default foam and cotton filter combo reduces airflow, I took off the cotton and made the airflow stronger but some dust will go through or airflow will be compromised if you don't clean it regularly, a thicker 3mm foam filter will be the perfect balance between airflow and dust protection and is washable (little tip, not a dealbreaker this product rocks!!)

I love this fan! I purchased it a few months ago. It really does keep my computer cool, and it is nice and sturdy. I make good use of the extra usb ports. The magnetic strip works very well, and the foam has been holding up nicely. It is super lightweight and easy to adjust the height stand. I also like the design of the front clips. They can adjust for different sized laptops. They are strong and haven't broken off like the clips on previous fan's I have tried.

Very powerful fans! I love the height it gives my laptop. It helps make it more comfortable to type on and use daily, all day. The fans get noisy at 1200+ if you are recording videos, but is quiet below 1200. I use it with the lights off because I like my dark space...it's easier on the eyes. The lights are still cool, regardless. They match my back-lit keyboard and that makes them ultra cool. This does a great job keeping my laptop cool while under heavy use, which I desperately needed because my gaming laptop was shutting down due to heat before I got this. I do not give this product a five star because the buttons can be challenging. They do not respond every time you push them, and some seem out of alignment from where they are supposed to be. So, if you fat finger it, you may land perfectly square on where the buttons actually are, rather then where they are supposed to be. That is my only complaint. Otherwise, this is a beast of a laptop cooler and I would definitely recommend it and buy it again, myself. Oh, It is worth mentioning that I have a 19" laptop (measuring from top left corner down to the bottom right corner with it closed) and this fits it perfectly. It is 15" across from left to right, 11" straight from top to bottom if that helps. My screen surface from top left corner to bottom right corner measures 17.5". That is important to know! You do not want to buy something that will not fit your laptop!

I LOVE this laptop cooling pad so far. It cools my Dell 17" CAD machine and is relatively quiet. For reference, I set the cooling pad to various fan speeds to monitor both the GPU temperature and noise level (room temperature = 24C):RPM dB C400 51 66 laptop fan running600 57 61800 58 581000 61 551200 66 52The underlying foam provides a good seal reducing amount of air from escaping underneath the laptop. The fan can really run fast and, of course, loud. It does have the setting memory for both fan speed and RGB lighting after a shutoff. I don't see the use of speed of 1,200 rpm and higher for my CAD laptop due to noise and unnecessary cooling down. It may be for gaming laptops.At this moment, I'm undecided between 600 and 800 rpm. At 800 rpm, this cooling pad's noise level is about the same as my previous cooling pad (setting at 6) while keeping the laptop cooler (1-2C) without its fan running. The laptop fan can be noisy when on with the previous cooling pad at highest setting at 6.Previous cooling pad: https://www.amazon.com/gp/product/B0BXGMYDD6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 while