Install Bay 3MBTT 3M T-Tap Connector 18/14 Gauge - 100 Pack (Blue)

Although the Amazon page lists these T-taps as made in China, my package stated they were 3M made in USA. They worked well, no problems crimping onto a fine wire. Place the wire in the slot, fold over the cover, and squeeze with pliers. Done. The trick is to get the right size T-tap for the wire you intend to clamp onto, so I bought a bag of each of the red, blue, and yellow. The T-tap allows you to connect in tighter spots than regular side-by-side splices, so although this is the first time I've used these, I like them a lot better.But as someone pointed out, these T-taps DO require the use of a spade connector, so be warned that those are needed. But the advantage of the T-tap is that you can splice different wire size easily by using the proper connector on each wire. In my case I had a fuse holder that had a 12AWG wire coming out of it downstream of the fuse that needed to be spliced into a 22 AWG wire. So a yellow 12 AWG T-tap was used on the fuse wire and I could use a red 22 AWG spade lug for the other wire. A standard single-size splice would not have worked in that situation.

nothing beet 3m very happy. and not a big deal if five get thrown a way a if damaged. this is normal can't beet the price on 100 pc , {for all the cry baby don't right bed review be professional} I will buy them again

giving 4 stars because it does what it's supposed to do, and the workmanship on these devices appears to be just fine. I would give it 3 stars to reflect how disappointed I was working with them, but I don't want to scare people into a potentially worse product.Basically, be sure you are using thick gauge wire. I know 18 doesn't sound very thick, but I must have had 22 gauge wiring or something because it was a pain in the neck to use with these. I had to finangle the wiring in order to splice using these. In the end it all worked out, it just wasn't as easy as I would have wished.That's not the product's fault entirely, which is why I gave it 4 stars. But it could have been easier too....

I've been installing headlights with LEDs & halos & these are perfect to have cause it makes it so much easier!

Work good .but I think a bag of 100 should come with a small tube of electronic grease.my thought....

I used these connectors when installing aftermarket amps in my Titan. I kept the stock head unit, so I needed these connectors to tap into the existing wiring so I could feed the signal to a signal processor. Well, they work, if you use them for the recommended gauge of wire. That's it, get'em if you need'em.

T tabs for when you don’t want to cut and re-wire stuff you can tap and easy to

These are pretty weak. They bend when clipping onto wires. Will not buy again. And yes I know what gauge wire these are meant to be used on and they don't work well. Every wire requires about 3 taps to get 1 to work.

They work great!

They work

Metal slit where the wire goes needs to be tighter. There is too much wiggle room.