KEDIERS G8 Pre-Installed 6 × 120mm PWM ARGB Fan, ATX Mid Tower PC Case, Computer case with Panoramic View Tempered Glass Front & Side Panel, Type C Port, Gaming PC Case (White)

The media could not be loaded. Case was great for me, I got the hotel with the buttons on the side and 5 pre installed fans. The 5 lower fans pictured are the ones that came with the case. All work great with my MSI MB and are ARGB, some people said the rgbs were dim but I found it depends on the software! Open rgb worked good for me.Overall can’t complain for the price, some things to note:-Very light without any components installed-Bottom mesh is quite see through (might think about wrapping an ugly power supply)-side panel are glass LOOKING plastic, clean well and don’t scratch easy though.-my model didn’t not come with the rgb hub some reviews speak of, but you are able to daisy chain at-least 4 of the fans to one ARGB header on MB.Cable management was nothing fancy but you have plenty of room back there, normal ATX case.

The media could not be loaded. Had to add a spacer under the middle fan when installing them on the bottom, the power connector was in the way. Added 2 140mm fans to the top, I like how it came out. Plenty of room for cable management. I also added magnetic filters for the side fans and along the lower front and side. Will probably add them to the back as well, as you can see it’s pretty open.

Good quality case. All the pieces fit properly so build tolerance is good. No problem installing Asus z790 MB and Intel CPU in case. Two important items to mention. 1. Vendor pics show 9 fans. The case only comes with 5 fans which is noted in the product description. However, some people will just look at the pic ans assume it comes with 9 fans. 2. No Lights on Fan problem. Reason, the RGB light hub must be powered by a SATA power cable to the Power Supply unit. The RGB hub must receive power using a SATA connector, much like a typical SATA drive. This is not shown in the manual so I was confused why the lights did not come on.

Kediers G800-Purchased this particular case for its eye candy and relative compactness for a high end gaming rig.Visuals do not disappoint when the work is all done. The main negative here is that there is a lot of work involved. Components are not of the highest quality so one has to be somewhat careful during assembly not to damage fragile parts like the light/fan controller and also not to hit your arm along one of the sharp edged glass panels. Limited room for cable management so large & particularly non-modular power supplies can be very difficult to manage. You will almost certainly have to reposition fans as how they come installed is not ideal. Expect to have to install & reinstall hardware multiple times until you discover how everything fits perfectly. All that said if you are willing to do the work this is an absolutely beautiful case once completed and performance is outstanding. Keeps both cpu & gpu as cool as any higher end cases i've used over the years including the coolermaster HAF and Thermaltake Armor series. If you want to quickly throw together a new build this is not the case for you. If on the other hand you want your rig to be the most beautiful thing in the room and are willing to put in the hours you will be rewarded with one of the finest looking and performing cases on the market.- Kediers G800.

This case is beautiful and was my first choice for a sudden build due to my last motherboard dying. I wanted something dual chambered and with a panoramic view. This case was perfect. Assembly was straight forward until we got to cable management. There just isn't enough room for cable management. The wires for the fans are hidden and tied down as best as possible but still stick out.The instructions for the fans and the argb controller are vague at best. The instructions did not mention needing a sata cable for power and since the one I have was too short I ordered one and will update this review when it arrives. The controller itself arrived corroded and none of the fans were connected to their specified slot for argb. The fans were all daisy chained to extenders and connected to the specified fan slots.*Update*Fans light up after power was connected to the corroded controller but are daisy chained so all 5 fans will mirror each others light settings.

Used this for a super clean mid range build. This case it a must have for the price!Note that the fans will work when you plug the headers into the motherboard, however the RGB will not. This is because you need to plus a SATA cable from the power supply to the RGB header in the back of the case. Hope this helps someone!

Case is great spacious and easy to assemble, Bit nerve racking popping the side glass panels off since the retainers are a bit stiff. The one major downside is the ARGB Hub attached was DOA and was attached directly in the way of the rear ssd mount. It's also a barebones pcb board with no type of covering. Basically exposed pins and contacts, so if you want to enjoy the rgb functions look for a bolt on RGB hub.

Love it.