MONTECH King 95 Pro Dual Chamber ATX Gaming Case with High Airflow, Tool-Free Panels, Heavy Duty Curved Tempered Glass Front, Six Pre-Installed ARGB PWM Fans with Hub

You can buy this case brand new for £130 at scan. Something is very wrong with this pricing. That said, the case is one of the best on the market for a custom build. 👍💕

This amazing case is available for £129 at Overclockers, comes with 6 fans, dont get ripped off!

Great case. The build quality is really nice. Love the fans. Looks beautiful. Lots of room for cable management.

I was having issues with my case so I was in need of a new one. After researching I found that this Montech King 95 Pro seemed to be the best for the price. After getting everything together I found out it was pretty much perfect for me! Pros * Price - While not the cheapest case out there, what you get for the money is pretty unreal. It is seriously feature rich. * Installation and Cable Management - Installation for this case is a breeze, it has a pinned stand off for alignment of the motherboard and plenty of room in the power supply chamber for all your cables. For Cable Management you have 3 Velcro straps going down the center which are plenty long to clean up the cables. It also has cable grommets are on all of the holes around the motherboard section to make everything tidy. * Hard Drive Cage - Even though they are outdated I appreciate the ability to install 2 3.5 inch hard drives as they are still a cheaper way of getting a lot of storage (I still have a couple I use for that). Of note it does block the back of the motherboard for a CPU cooler install so be prepared to remove it if your cooler requires it. * Airflow & Dust - The case comes with 6 fans pre installed (3 120s on the bottom, 1 120 on the back, and 2 140s on the side. While I didn't use them as I preferred my other fans, it is a great value addon. It has a large dust filter on the bottom and the also has filters on the side and top of the case. * Looks - Even though the curved tempered glass on the front is a bit of a gimmick, I must say it looks pretty cool in person. It has a large RGB strip on the front that is nicely defused and the overall builed is very pleasing to look at. * Build Quality - This is a very solid case, I didn't feel any flex at all while installing everything and there were no loose parts I could feel. Whileit does have plastic panels they don't feel cheap and don't really look like plastic. Cons While this case is near perfect I do have a couple gripes/suggestions for a future version. * Bottom Dust Filter - The case is designed so that you remove the filter from the back, which in most cases it makes it more difficult to remove due to the size of the filter. The size needs to be long as it needs to accommodate the 3 fans on the bottom, but it makes it so you would need to physically move the case to get it out. There is a lip on the bottom of the case in the front that is meant to stop the filter that can somewhat prevent you from inserting the filter from the front. I was able to install it from the front, at least with my case by working with it a bit. While reading reviews I've seen that some people have brooken off the lip, so I think the best solution would be for Montech to make this piece movable with screws so that it can be installed from the front or back. * Top Panel - Beware when installing an AIO as with some of the screws it can cause the top panel to not seat in correctly, there must be very little space in between the AIO panel and the panel. I found a set of screws that came with the case that fits the AIO which were lower profile that fixed the issue for me. But if Montech reads this it would be a good idea to add another couple milimeters of space above the AIO plate for better fits. * GPU Sag - This case has no anti sag bracket pre installed, so if you have a larger card prepare for some droopage. Due to the fans below the GPU it can be tricky to find one that works well, so having one built in would definitely be a plus. The solution I used was the Lian Li GB-001 since it stays well hidden since it mounts to to the motherboard stand offs, but would still prefer a built in solution. Overall this is a pretty amazing case and I would recommend for anybody to get!

The Montech line is always amazing. This is now the 3rd case I've used. First the Sky Two, then Sky Two GX and now the King 45. I love the fish tank look but hate the dual chamber width cases. So seeing the 45 was slimmer I decided to try it and I'm glad I did. 7 fans, down from 11 in the GX and yet the thermals are great. The AX120 Pro fans are quiet and yet flow more volume air. The rgb blades are a nice addition as I always loved the original AX120 fan design. Loved the small screw box that came with the case. Easy to set up and remove components with your case. I got it running only to find out the "like new" condition from Amazon Resale was anthing but. The person who returned it before me didn't wrap it back in the plastic bag, so during shipping the case rubbed on the box and Styrofoam causing scratches in the black metal finish. Also the led strip on the front had a dead zone. So I can't fault the product, but who ever returned the case first and Amazon then selling it in a condition that doesn't match the description. I'm sure Amazon will sell the one I returned again, and I feel sorry for who ever gets it. I wish product reviews were more about the product and not the Amazon experience or the buyer not reading the product description clearly. Rant over... Get this case!

Montech king 95 pro, is one of the best cabin out there, 6 fans best to keep up the system cool and running for long section....

I am an experienced PC builder and have built tons of PCs for myself, friends, and work. This case was so easy to hide cables and hook up fans and keep it looking beautiful. Fans were in the correct push/pull configuration. All of the internal cables were of perfect length and able to reach the right pins on the motherboard. I used an air cooler on an AMD 7800X3D with a RTX 4900 and the case remains cool. I did add some additional fans in the top of the case for extra lighting/cooling. Running the system full speed, the system stays cool and the temps don't ever get to hot. This will easily be the case I recommend. I like other cases with the similar look but with the buttons on the side, in my opinion, it makes it better.