Cooler MasterMCM-M500-KG5N-S00 MasterCase MC500 Mid-Tower ATX Case w/Freeform Modular, Front Mesh Ventilation, Tempered Glass Side Panel, Carrying Handle & Cable Management Cover, MC500 Mid Tower

rather if your into old school PC building or like having a liquid cooled PC. This case fits it all! I've been using it for almost 5 years now and never had a overheat. Cable management is really good and it has space for those big bulky video cards with room to spare! You can never find new cases like this one though it seems these days, so I'm very happy I got this when I did! :D

High quality and solid construction throughout with lots of flexible setup options. Cable routing options are also quite good. The full glass side panel is great. This is a big unit. I should have looked up the measurements prior to purchasing but I was able to make adjustments to my shelving to make it fit. The lifting handles on the top are plastic and are insufficient to lift a fully outfitted rig. Overall, I would definitely buy again.

This is one of the best cases I have every used in 25 years of PC building. The rubber cable ports are fantastic with plenty of space to run and hide cabling. The handle on top makes pulling my case out a cinch since I do upgrades often. The only con is the glass panel window needs a coin or screw driver to open. Wish it was a thumb screw or lock instead.

If you plan on having a case that will allow you to grow with a lot of airflow, this is one that is quite affordable. Even without a PSU shroud, very easy to manage the cables to make things look nice. Running a mix of things on this computer including a Plex Server which I will probably be increasing the amount of HDD's in the future for a RAID configuration and I should be good for the foreseeable future.

Firstly, this isn't my first case I've built a PC in, and definitely not the last. To start, the size of the case is huge which is what I was looking for. I wanted to put three 120 mm fans in the front. I asked ahead of time if it could fit three, they all said yes. But when I tried to install three, a third fan wouldn't fit. So to get the max efficiency from the front fan mounts, use two 140mm fans. CORRECTION: This case does fit 3 front 120mm fans, but you have to remove the dual 5 inch drive bays. My biggest and most disappointing complaint about this case is the top isn't big enough to fit a 240mm radiator. My plan was to mount the radiator to the top with the fans pushing air out of the build. The top mount isn't big enough to attach the radiator in this configuration as the radiator is just slightly too long. Therefore I had to install the fans to the top mount instead, which put me in a config to which the fans suck air into the build instead of out. Technically, this is better as the fan suck in fresh air from the outside. But I really wanted to have the fan inwards so my white fans could be seen and look cool for my LED lights. And there's not enough space for a push pull config. I guess this mainly due to the case having 5 inch drive bays for DVD drives. It takes away room for the radiator. But there's plenty of room in the front for a 240mm radiator. Cable management in this case was a big plus. I had no problem fitting on the back cover. There are included Velcro straps and little slip that can be used to wrap zip ties around. Very useful. The four USB ports on the front were a big selling point and are very useful. The handles at the top are more than sturdy for my build the weighs a hefty 40-50 LBs. Another big selling point for this case is the tempered glass. The glass on this case looks great. No complaints. Plenty of SSD mounts. Extensive room for HDD mounting. Although contrary to the pictures here on Amazon, the case only come with one mount case for two hard drives. Which is okay for me, but maybe not for others. The bottom plate the secludes the PSU from the rest of the build is fantastic, and hides some of my bad cable management skills. Dust filter included for PSU fan. Finally, this case is not half bad for cooler master, though I've seen better and wish I could of bought better. The only thing that make this case worth $85 is the glass panel. But from the outside looking in to my monster build, this case is pretty good looking.

The glass was and still is in perfect condition, the air flow is great the modularity is great. I use this for medium to high end CAD and simulation work, I was looking for something that wasn't too "gamer flashy" since I use it for work and it delivered. I Love the handles (reinforced aluminum with plastic overlays for some comfort, but very rigid)!!! any time I need to add or integrate anything into it the handles are extremely rigid and provide a great place to maneuver it to plug something into the back. I am currently running a water cooled 6C i7 OC: 4.4 ghz through the front 3 fans, a p4000 GPU with a rear exhaust fan and 2 exhaust to the top. Typically I would prefer to pull in through the top for the water cooler but with so much room for intake in the front and the magnetic filter that comes standard, I have not noticed any dust bunny problems (But every now and again I'm always hunting "wabbits" just to be safe at the front intake). I highly recommend this case both for its fantastic airflow (seriously, the fact that all the fans are stock ((very minor noise) and a top of the line water cooler)) and do heavy cad work without a single issue. Its great!!

Had this case for over half a year now and love it. Roomy, easy to clean or open up and work on, looks sharp, and comes with plenty of modern features (e.g., USB 3.0 ports, tempered glass side window, removable dust filters, and carry handles). The 5-1/4" bays sealed the deal for me as I enjoy having an optical drive. Best of all, the mesh front panel means the case will actually help keep your components cooler than virtually any case with a glass front panel. Looks, convenience, AND functionality--what more could you want?

Lo compre pensando a futuro y no estoy nada decepcionado, es muy espacioso, las asas que tiene en la parte de arriba vienen perfectos para mover la PC con total comodidad y seguridad, los dos ventiladores que trae son potentes y nada ruidosos, un puntos concienciar es que los tres filtros de polvo, frente, arriba y abajo, no son muy finos y por ultimo el precio creo que amortiza con el tiempo.

First I want to start off with a small warning, this case is shipped in its own box so if you have it shipped to your home try to require a signature or use Flex Delivery with Canada Post if you're worried about porch pirates. Anyone that wants to will know that it's a computer case. Anyway, this is a great case. It's more than large enough for an ATX setup. It keeps the PSU separated in its own compartment but allows plenty of cable management options in behind the motherboard. I also really like that you can put 2.5" SSDs either just below or just behind the motherboard. It has 5.25" bays for those of us that still use them. The tempered glass is also gorgeous. The case is wide enough to allow for plenty of airflow. It only comes with a single fan in the front with the 3.5" internal bays though, something I plan on rectifying, even though I doubt I need to, judging by my component temperatures. I highly recommend this case if you're looking for something big and sturdy with a large tempered glass window.

Very flexible in where you are able to mount things. Very good case!

Un excelente gabinete totalmente modular de alta calidad muy cómodo de ensamblar le caben 3 ventiladores de 140 mm frontales 2 de 120 mm arriba y uno de 140 mm atrás genera un flujo de aire increíble los componentes están a temperaturas muy bajas

me gusto mucho, para los que nos gustan con espacio y sin tanto escandalo, luce y no se ve de baja calidad, lo recomiendo ampliamente es un poco mas grande de lo que pense pero no me quejo.