LAUNCH X-431 i-TPMS Tire Pressure Monitor System Service Tool Work with X-431 Scanner and i-TPMS APP Supports 315/433MHz Sensors - [Upgraded Version of TSGUN]

It works great. I had 4 sensors programmed in just a few minutes.

Product is working great. Saved money buying the programmer and tire sensors over a tire shop. Not having programmed tire sensors previously it was a little cumbersome. This paired well with my launch scanner. Over all with the money saved and the time saved programming myself, I’d say it’s well worth it.

I bought this primarily to use on Chevy truck sensors, and I've had pretty mixed results so far. It works okay on 2020 models but it does not have support for anything newer than that.My main complaint is that you MUST use the accompanying app, which must be downloaded from a QR code in the packaging. IT IS CHINESE SPYWARE. I was not even able to download it for a while because it was blocked by my ISP because it accesses known Chinese spyware servers. It is also unlisted on any app store. Ultimately I downloaded it to my scan tool, and you have to give it permissions for EVERYTHING. Internet history, call and text history, contact information...the whole lot. If you don't this tool is completely unusable. Honestly I really highly highly recommend against this tool!!

Buen producto y muy compacto

Does the job. Works for those tough to program Ford sensors.

Easy to use, with well written instruction manual. Simple setup and binding with the Launch tablet X431 Pro. It’s an easy add on that adds a great functionality and simple TPMS ops to your diagnostics to your system. Along with the BST360 battery tester your in position to take control of most of your diy automotive issues. This system offers a lot of expandable.

Works good, I use it together with the launch scan tool. I have programmed launch and factory (oe) sensors.

Only works with some but not all

This unit is worth every penney! I just replaced all my tire sensors due to the age of them. They were starting die from the battery age. After replacing I tried to activate the new sensors and one sensor would not activate cause the rest not to register. I then took the truck to the dealer, they said they could not activate the sensor. I went for several months without an activation. After purchasing the Launch TPMS tool I was able to activate the sensor on my truck and saved having to replace that one sensor. This tool is highly recomended.Thanks Launch

The device alone is only half the system of course, you can pair it either with an X-431 scanner, or a phone app: i-TPMS which you can download by scanning the barcode on the back of the device. Note - the phone app supports fewer features than the X-431 scanner.It's compatible with all 315/433 MHz sensors, which covers the vast majority of vehicles sold.The tool is quite lightweight - plastic build but reasonably robust and with nice big buttons so you can easily manage it with gloves. It's a rechargeable unit and mine arrived with no charge at all which is unusual. At this point I noted that the USB-C charging port is non-spec - it doesn't support proper USB-C cables - you need to use a cheap USB-A to USB-C cable. Annoying that they cheaped out here - meant I wasted an hour trying to charge it before swapping cables.In the meantime I scanned the QR code to download the phone app. Note you will need to have your phone settings to allow you to install apps from places other than Google Play - this is easily done and I won't go into it here.Once the app is installed you can easily connect it to the device. Note - when it scans for the device it shows up as a faded red box with the Serial Number. This looks like it's disabled, but it's not. You need to click it and hit OK. The hand-held unit during this time displays nothing to indicate it is being connected - in fact the unit doesn't really do anything until you start to use it via the app.Through the app you select the vehicle make, model and year and then you can work through the sensors using the keypad on the device.You can read the existing sensors and derive some information from them - more functionality here is available through the X-431. Through the mobile app you can1) Replace the sensor2) Activate a sensor3) Program the Sensor ID4) Query the OE part number5) Generate tire pressure detection reportsI can't fault the tool, and the price-point is typical of this kind of professional instrument.

Works like a hot dam! Charge, point at sensor and it logs it, Activates it and can reset themWicked tool

Everything seems to be so complex on modern cars today and repairing them requires a great deal of specialist tools.Launch is a well respected brand in the UK, and popular with both independent and small garages.This Tpms reader/writer is compatible with a lot of diagnostic machines from Launch and also works with some branded units.I have connected this to a Launch GRP MOT IV, which I have had for a few months and it required me to do a firmware update to allow the TPMS wand to connect, but once completed I found it simple to use, and extremely useful.Launch has some very good online tutorials which are simple to follow, and it is compatible with about 95% of tyre pressure sensors on the market.It is able to both read data from the valves and reprogram new ones and is a must have device for garages in my opinion.I have to say that I’ve found to be excellent value, very well made and robust, straightforward to use, and highly compatable with exsisting tech.I hope you find my review helpful.

Extremely well made TPMS programing tool.It has a rubber coating just like most true automotive diagnostic tools. Won't slip with greasy hands. First off this tool must be paired with an Android phone or a scan tool. I paired it with my phone easily... Just scanned the code on the back of the tool, installed the app, done. There is a orange square on the end of the tool. That must be around the valve stem for this to work. The battery on your TPMS valve must be good as well. It will not recognize a valve stem with a dead battery. I tried it on my 2011 Tahoe... And couldn't get it to recognize and valve. Obviously dead batteries because I tried it on my Husband's 2017 van and it recognized them immediately. Mind you at first it did not, lol but my husband knocked off a hubcap in the fall and hasn't bothered putting it back on, and the tool recognized that valve in seconds because I was able to put the square opening Around the valve where as I could not with the hubcaps on. Lol so I had him remove the other 3 hubcaps and it registered them immediately as well. So the tool works well but the batteries must be good in the stem and you must be able to put the tool around the valve stem for it to work. I hope this helps in your decision making. Oh, lol and my husband now has all 4 hubcaps back on his truck