60 Gallon Sandblasting Cabinet, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal

I almost didn't buy this dust collector because of all the conflicting reviews but I'm glad I did. Shipping was a few days faster than advertised which was nice. I mounted this dust collector on a Harbor Freight blast cabinet. The existing hole in the cabinet was an exact fit for the dust collector. I only needed to drill four holes in the cabinet to get it 100% mounted. I think I only spent 10 minutes getting it installed and I was up and running. It works perfectly. I only have a few hours on it so far but it works great. I was using a 5hp Shop Vac for two years and this works better by far. It is easier to reclaim blast material out of the dust collector. A Shop Vac is about the same price as this dust collector. Other reviewers complain about noise. It is loud but not unusually loud for a vacuum/ dust collector used in industry. My 5hp Shop Vac was just as loud as is every other Shop Vac I ever used of that size. I always used hearing protection before and I do need to now with this dust collector. It is loud but that is how this type of equipment is. I sand blast as part of my business and do it many times a week hours at a time. I don't have an issue with this unit. We'll see how long it lasts. I'm happy with it. Contrary to other reviewers I think installation was fast and simple, noise level is typical, and performance for the size and price point is in line with what you get.

Very nice blasting cabinet. Instructions were adequate and all the parts were included - no missing fasteners! A couple of the corners were bent from package getting dropped during shipping, but they were easily straightened out with pliers. Surprisingly, all the fastener holes aligned up properly; no issues with assembly. Speaking of assembly, although it could be done by one person, it is exponentially easier with two sets of hands. After first use of about an hour, there is a small bit of media (soda) escaping - should be easily corrected with a little bit of the sealant that was included in the package - otherwise, the factory applied foam sealing tape is doing a great job. I purchased the Vevor dust collector and installed it and it works great to keep the viewing area clear so that you can see what you are doing. I used some scrap lumber and built a rolling platform under the unit using nice casters from here and it makes it easy to roll around to store out of the way when not in use, plus increasing the height about 4-5" makes for a better angle for doing the work with your arms in the gloves - at least that's my opinion for someone that's 5'6" tall.

Works great overall! I do recommend ordering smaller blasting heads if you plan to use fine media — about 1/8 inch is ideal and smaller than the four heads included. I also bought the dust removal add-on, and I consider it a must-have upgrade. The built-in light works only intermittently and is far too dim, so I added an external LED work light on top of the viewing window for better visibility. The window seal also didn’t seal well out of the box, but applying painter’s tape around the outside fixed that issue effectively. Both the pickup and air hoses could be better quality. I plan to replace the pickup hose with a stiffer one that won’t crimp, since the kinks slow media flow (though it still works). The air hose connects with a metal clamp on a barbed fitting, which I’ve had to retighten several times—perhaps a sturdier hose would allow a more secure fit. I always disconnect the air supply when leaving the shop, just in case the nozzle hose at the gun it starts leaking again. If your compressor doesn’t already have moisture control/filtration, you’ll definitely want to add it. I picked up a 4-stage desiccant filter for under $100, and it works great. Final Note. I have purchased several products from VEVOR and despite a few issues (like those above) I feel the price and basic quality more than makes up for you for any small issues I have to fix.

Zero thought design makes you wish you had just built your own. How loud is it? You will go deaf without hearing protection-that loud. So loud you won't want to turn it on. You shouldn't have to wear hearing protection to sandblast parts. Doesn't even mate up with their own 40gal cabinet so you end up with two extra pressure ports that serve no function. Terrible assembly process drilling a 2" hole in the side of thin sheet metal. It's huge. It functions but in my opinion stuff like this shouldn't even be allowed to be sold.

I’ve been really happy with this 60-gallon sandblasting cabinet. The cabinet itself is solid, the size is great for most parts, and the viewing window and lighting make it easy to see what you’re doing while blasting. For the price, it’s honestly a really good value and works well for cleaning rust, paint, and small automotive parts. The only thing I would recommend is upgrading the hoses. The ones that come with it are pretty stiff and tend to kink, which can affect media flow. Once I swapped them out for better hoses, the cabinet worked even smoother. Other than that small upgrade, it’s a great setup and does exactly what it’s supposed to do. If you’re looking for an affordable sandblasting cabinet for a home shop or garage, this is a solid choice.

The unit is good for the price. The instructions are horrible. Bad English, type was hard to read, too small. The parts pages with the numbers didn't match the items. The order of assembly was hard to follow. The worst part was when we started assembling the media cabinet, 2 of the side panels edges weren't bent at all, the other two were. We had to bend the edges with crude tools since we don't own a sheetmetal brake. The bend came out horrible, but we made it work. We had to we had come too far in the assembly. We also had trouble with the door hinges, the instructions do not even mention if the hinges go on the inside or outside, again after many try's we made them fit. Overall, for a Chinese part the sand blaster will work fine. We modified the cheap airline fittings with higher quality parts. I suggest take lots of pictures of all the panels before assy, especially the media cabinet.

I mounted this to the typical HF cabinet. It replaced a ShopVac/dust deputy setup that worked but lost suction fairly quickly. I use medium crushed glass media. 1. Yes, it's loud (wear hearing protection) 2. You'll have to clean the filter (Remove it and knock out the dust) after about every hour of use. 3. It moves a ton of air when the filter is clean and will suck up media. Dump the media out of the bottom before cleaning out the filter so you can put that back in the cabinet without the dust. 4. It's not a miracle cure, it still requires maintenance but when it's working it's a lot better than a regular ShopVac. 5. I'm sure the included filter is letting some very fine dust through it, You can tell when it's running. If you are sensitive to that then just wear a dust mask when in use.

Directions are trash half the parts are bent up and scratched

vraiment génial, mon cabinet de sablage ne fait plus aucune poussière a l extérieur du cabinet

Tutto bene grazie

High Quality. Very heavy. Works great

Muito útil

Fungerar över förväntan 😃