Mondazie 10-20 Gallon Fish Tank Stand, 24" L x 12" W x 20.5" H, Black

good.solid.stable.strong.

I read numerous reviews about this stand before purchasing with many noting difficulties constructing the stand. First, this is a very solid stand when built correctly. Second, I can provide some helpful advice to the build process to make it easier for the 20 gallon stand - I built it in about 30 minutes with some careful planning. To build this stand without spending 2 hours cussing and questioning your sanity you need to open the box and find the directions before anything else. I found the direction booklet wrapped to the pieces of wood that create the lower shelf. Look at the picture of the stand and this will help make sense of my suggestions. Open the directions and study them for a quick minute so you have a basic idea of the parts you’re unpacking. When unboxing you will notice various pieces shrink wrapped together. KEEP THESE PIECES TOGETHER!!! If you throw them all in a pile you will slow your progress and become flustered because some parts have subtle differences. Pay special attention to the amount of holes that are in each piece of square tubing. 2 pieces of square tubing make a full length tube for the length of the stand. Okay, you have your parts laid out and organized as a group by how they were wrapped together. Find the 2 bags of assembly parts. One bag contains the bolts and the other the adjustable feet. Sort the bolts into the 3 sizes provided. Let’s build! Find the hex key tools for the screws in the screw bag and follow the directions. Any 2 pieces of square tubing that needs to be joined together with 2 screws to make a full length tube - you will need to assemble these by making the connection joint as tight and square as possible to each other (this will save you numerous headaches later in the build and keep the stand square) and set them aside while you’re working thru the build steps. You will construct the end pieces first, then the bottom shelf, you finish building with the top shelf with the metal tube grid. You need to keep everything square so the pieces fit together. Any screws in the end pieces start by screwing them finger tight. Following the build process and attach the wood pieces to make the bottom shelf. Line these pieces to be as square as possible and tighten them down solid to create a square base. Is it square? Perfect! Now go back and tighten all the screws at the ends to firm up the stand. Next, you’re going to build the top shelf. It’s basically the same as the bottom shelf but instead of the wood pieces making the top square the tube grid the fits inside the top tube frame will make the stand square. Make sure each screw tightens down evenly over the entire top. If you have gaps in the joints the stand isn’t square. Once you’ve constructed the stand check every bolt again to make sure everything is tight and draws all the connections together. Now, sit back, have a beverage of your choice, and marvel in your construction skills!

Exactly what I wanted. Yes it’s short.

Easy to put together. But doesn’t 100% fit. If you don’t put on all the tabs on the side then it will fit. Also I wish it was taller

So disappointed on the picture it looks another size and the truth is is so small and low it’s Not what I saw on the photo 😟already assembled it and not what I was expecting

I have a 37 gallon tank not rimless and it fits on it I could only put 3 of the brace brackets on it though two in the front and one on the side. The wall is against the back of tank. It is a lower stand which is what I needed so it’s kinda like putting your tank on a coffee table.

Was looking for a shorter stance and this was the only one I found. I knew my 10 gallon wouldn’t fit based on the measurement cause the width is little bigger so I knew I had to get a plywood cut. It came out perfectly. For the price, I think it was worth it. Once the fish tank is set up, the stand should hold up better.

I wish it was longer

Great quality and look, very sturdy and simple to put together.

Resistente y práctica

This might sound ridiculous, but I was looking for a tank stand for our aquatic frog's upgraded tank, it was massive, and heavy and I couldn't comprehend how the bog standard cupboard units you see could withstand the weight. I dont think they're particularly good looking either. I found this beauty online, and got it shipped to the UK. Its absolutely perfect, unbelievably easy to build, good storage underneath on the shelf. Barely requires cleaning as the tank is mms from being flush. Great!

Do.not buy this.. please 🙏 im here warning you ya you do not buy this. Mine was missing parts then when assemble was crazy not square no matter what I did and since nothing fits nicely yur force to make a top sheet of wood yur self or chance the consequences this is my third Amazon stand thats just pur trash maybe there one out there im missing thats amazing but sofar just build or pay some one to build ya one its better then dealing with this trash or a broken tank

Probably close to double what it should be priced at and not so happy about it he scuffs on the parts but it's basically as described and looks nice once set up, to people saying it's lower than they wanted I would suggest simply reading the dimensions, personally I prefer the lower style.