RioRand 2-Pack PP150 100 MHz Oscilloscope Clip Probes with Accessory Kit (2PCS) (B)

Good isolation

The 100MHz Oscilloscope Probes are good quality and work nicely on our Tektronix 60MHz o-scope. Each probe set comes with the probe, a detachable clip top, a ground clip, color bands, and a tuning tool. We connected the probes to the scope, took readings from the calibration output, and used the tuning tool to adjust the probe for a nice clean square wave. The whole process took less than a minute. These are good quality and a good value! Highly Recommended! CFH

I bought these for my Tektronix 2445A scope, this is an analog scope with a range of up to 150mhz so nothing too intense. These probes work perfect for it. I imagine if you're working on something that can work at +500mhz, noise sensitive projects, or other extremely fast and subtle signalling these probably aren't up to that kind of a job. I performed a few tests to make sure they were working properly, and luckily they seemed perfect out of box though I've only tested them up to 50mhz at ~100mv. Pros. 1. Probes come in pair with ground clips and hook tips. 2. Probes are built well and feel solid Cons. 1. Adjusting probe compensation seems to not effect anything when atten is switched to 10x 2. 10x atten does not pick up at all. One probe its open and always at 0v and the other I lose the beam on no matter the division set for voltage or time. (I dont need this for what I do , but you may). Conclusion: If you need a stand in, these are perfectly fine. If you need something for high frequency, or for the 10x attenuation, dont bother. It works great on my analog scope, So I assume these will work fine for most modern full digital scopes if you're just doing simple hobby stuff.

Having worked with oscilloscopes for the past 20 years, I was really shocked with how well built these were. They seem well put together, came with the color coding rings to make identification easy and have the compensation adjustment point built into the end by the BNC connector. We are using these with a Vellemen oscilloscope / function generator and are quite pleased. Please note, these are not comparable to new probes for something like a LeCroy, Tektronix or Aglient oscilloscope, but work quite well if you are doing hobbyist level work, or just playing.

The probes work as expected and the items included are as shown. The probes are 1x/10x switchable. I appreciate the completeness of the kit: probe color markers, grabber tips, and the (yellow) tip shields that make it easier to avoid accidentally shorting adjacent signals while probing. The kit includes a pouch with specification sheet so all the items may be kept together while unused. The black item appears to be a tuning tool (screwdriver) that one might use to calibrate the probes.

I was quite happy when these arrived to pull them out of the packaging and find that they feel very well-made for this price point. They have all the normal stuff you'd expect from probes - 360 degree rotation at the BNC, solid probe hooks, assorted colored clips, and nice long strain reliefs on either side of the cable. The cables themselves aren't fancy silicone or anything but seem more than adequate for the task at hand - which is hobbyist use. I'm not a professional and can't speak to anything more than what I know, which is very basic usage. But for my purposes they're quite good. I was pleasantly surprised by the general quality of the cables given how cheap they are and I haven't had any issues with them at all. I don't really expect to either.

I needed a set to replace the damaged ones I use on the plant floor. These appear to meet all my needs and resist the abuse with heavy tools I work with. The electrical characteristics of the probes appear to be very good and pass through a clean signal without disturbing sensitive digital logic. Great performance for a x1/x10 probe and appear to work well with high frequency signals even at several hundred megahertz. Highly recommend.

They worked well

Nice product. works great

I use these on an old scope and they work well. Easy to adjust.

It looks in good quality. I don't use it recently so can not give more advice.

Using them on a 100 mhz scope and they work very good.

Excellent product. Well made seems to be of great quality. quick delivery