Cat7 Cat6A RJ45 Connector 12-Pack, Tool-Free Zinc Alloy Shielded Ethernet Termination Plugs for Cat7 up to 23AWG Solid Bulk S/FTP Ethernet Cable

Dont even bother with the crimp style connectors when dealing with cat7. these are the only way to go if your terminating cat7. Especially if you have cat7 with no striped color just all whites. Price is high but they are well worth it.

You are working with some pretty small wires and lengths need to be the same, and can be hard to hold everything still without pulling one wire out if place. After a couple tries I got it working and hope I won't have to try ever again.

ITEM AS SHOWN AND PROMISED, THANK YOU GREAT SELLER

I bought shielded CAT6 for under my house. I tried using my regular ends. I quickly realized the CAT6 has a slightly bigger wires. These made life so much easier. If you are working with CAT6+ then these are your best friend. Also great for quickly testing wires.

These connectors can't properly terminate CAT6 wire.The wire never comes close to coming in contact withIDC portion of the connector

These work great, no need to use a punch down tool, or a tool to squeeze together. Easy to push together with some strong hands. Be careful with copper strip to cover wire shielding. I think I've installed about 30 of these and have not yet had one fail to work.

These are pretty nice.. takes guessing out of aligning wires... however, make sure you don't need to clip the wire on the back of a router/access point where it might be a bit too long.. it happened to me and ubuiqiti... darn, i really liked how these worked too.

Conectores de buena calidad, reutilizables, cumplen bien su funcion. Muy recomendables

These RJ45 connectors are super easy to install. All you need is a pair of side cutters to cut the cable and to remove the outer jacket. Everything else requires no tools (such as cable crimper).Work well. A good solution for someone who does not need to install RJ45 connectors often. Otherwise, get a crimp tool and standard connectors.

Me gustó mucho lo practico que es y lo fácil de instalar con el cable Cat 6A el cual es un cable muy grueso de uso rudo.

Muy fácil de instalar, y lo coloqué en cable cat7. De lo mejor.

Designed by engineers in Germany, this is a high-quality snap-on connector that is said to be made for CAT 6 and CAT 7 network cables. It is compatible with cables that have AWG wire gauges 23 and 24, so I think it should also be backward compatible with CAT 5 which is also using AWG-24 gauge. The only issue with that I imagine is the outer diameter of the cable jacket, it is smaller in CAT 5. You may easily remedy that by adding a few turns of electric tape around the portion of cable that meets the hugging back side of the connector. I tried, and was able to produce a working straight-through CAT 5 cable with two of such connectors at the ends. The beauty of this type of connector is that you may rewire it anytime at a whim to any configuration you wish, be that straight-through, crossover, RS232/RS422 equivalent, etc. etc. I would still consider this type of connector to be more appropriate for home use by DIY enthusiasts who don't want to invest into expensive crimping tool for the sake of making a couple of custom cables. In professional setting, crimpers are used universally, which simplifies the operation. They provide reliable and permanent results by helping to strip a portion of cable jacket without damaging the wires inside, to cut the exposed wires to exact proper length, and finally to crimp the wires inside the standard connector with calibrated amount of force. The standard RJ45 connector is also twice shorter than these snap-ons, and no one in a serious company will want to mix cables with connectors of different lengths on the back of a densely populated network switch.

I needed to wire up some Cat6 Ethernet cabling. I wanted to complete this task quickly and didn't want to have to deal with crimping etc. This ZOERAX Cat7 Cat6A RJ45 Connector 6-Pack, Tool-Free Zinc Alloy Shielded Ethernet Termination Plugs is a really good solution.These plugs come in a nice big six pack and are made of quality materials.I installed this RJ45 connectors on a 23 gauge Cat6 Ethernet wire. It’s a bit tight with larger fingers, but is re-workable if one miswired it. This is must have feature for me since I am slightly red green colour blind.Normally I would lose a couple of crimp RJ45 connectors due to miswiring, cross wiring or the gold connectors did not sit right with the wire. I really liked the keyed terminals to the housing. This made it easy to make sure one keeps the correct orientation of the terminal before clamping down the housing.Hint: Remember to install the strain relief boot before wiring the terminals.These connectors are great for people who don't have the tools or aren't used to doing the whole wiring, crimping etc. It is fast easy and effective.I highly recommend this product.