Product Description The M-Wave 2-1 Kickstand is perfect for the heavy weight cruiser or Electric Bicycle. When in the down position this stand functions just like a 2 leg kickstand but once in the raised position it folds to one side take but 1/2 the space of traditional 2 l Box Contains 1x kickstand
S**D
Nice and stable, good for e-bike.
Great stand for my heavy E-Bike, which tended to topple over on a single sided stand if there was any weight in the rear panniers. Bike is very stable with this one. Fits nicely into the existing stand mount on my bike frame. (Remember this stand has no top bracket). I like the single sided look, its very neat, and there no risk of clashing with the chain. Like another reviewer said, it takes a while to get used to using it, you have to remember to lift the bike up slightly for it to fold out as you lower the stand.
V**X
Bolt too short and missing important fittings.
Seems strong and well made, haven't actually had a chance to fix it to the bike yet as the bolt is to short for the gap between the chainstays and there is no top bracket so will have to get a longer bolt and something to secure it with, for the money id of hoped it would of come with universal fittings included.
F**S
Very Good
Good quality and easy to use
M**N
All centre stands should be like this.
Absolutely love this stand, its made using my bike for shopping so much easier. Standard centre stands wouldn't work with my bike as chain would rub on stand when cycling & this stand solved that issue. Takes a lil while to get used to using it but isn't difficult to use, just have to remember you need to lift bike up for it to fold out as you lower it.
H**G
Good product
Installed one of these on both our bikes, a Trek Navigator and an Electra Townie.Installation was simple, fitment was perfect, they appear to be very good quality, and they hold the bike steady.I adjusted the height on mine so the rear wheel is approx. 1/2-1 inch off the ground when on the stand. This makes it easy to spin the wheels when adjusting air pressure, lubing the chain, or other maintenance.When on the stand it doesn't interfere with the pedals, and when retracted, it tucks up neatly on one side of the bike.
P**E
Short bolt for MTB. Fairly sturdy with heavy bike/ panniers.
First thing I had to do was dart out the hardware store and get a longer bolt, as it was too short for my MTB. As I use panniers, a kickstand is very useful when removing them, packing, etc. These do a decent job and are fairly sturdy. Just have to be careful. Components work smooth and solid so far.
L**S
Robusto y cómodo
Muy robusto, aguanta perfectamente la bicicleta con una niña de 15kg en el portabebes, pero ojo, tiene un cierto tambaleo, con lo que es muy válido para sostenerla en el proceso de subir y bajar al niñ@ de la silla, pero no para dejarla sola con seguridad.Con cargas fijas no hay problema.
E**S
Mejor de lo esperado.
En cuanto al servicio y envío como siempre, de sobresaliente por parte de AMAZON.Lo acabo de montar, queda perfecto, permite regulación de altura, aguanta de sobra el peso de transportin con alforjas y sillita de bebé. Al quedar recogida quedan ambas patas al lado contrario de la cadena, en definitiva queda de la mejor manera que uno se puede imaginar cuando lo compra.
F**E
Cómoda y útil
Son cómodas y al girar los pedales y no chocar con ellas ayudan en pequeños trabajos de mantenimiento. Muy útiles.
M**L
Miguel Ángel
Robusto y resistente perfecta para lo que yo estaba buscando ahora la bici se mantiene en pie muy estable muy recomendable el producto
P**E
Non adapté au 28 pouces très haut
L'idée est originale, quand on replie la béquille les deux barres passent du même coté (coté sans la chaîne) mais pour un 28 pouces il ne tiendra pas le coup parce que les fixations (certes avec des vis solides) doivent se faire sur le tout dernier cran faisant sortir la partie plastique de plus des deux tiers de sa taille : résultat, le plastique plie sous le simple poids du vélo.De plus, l'écartement n'est pas symétrique puisque les barres ne sont pas symétriques (pour permettre à ce système original de fonctionner) : résultat, une barre en avant, une barre un peu en arrière font que le vélo est penché coté gauche...Bref, j'ai mis 2 étoiles pour l'originalité du système que j'aime bien mais qui n'est pas au point et la rend inutilisable pour ma part (vélo assez haut : btwin 7 en 28 pouces pneus cross (nouveau btwin original 700)J'ai vraiment beaucoup de mal à trouver une béquille qui convienne à la hauteur de mon 28 pouces....
A**E
Sehr stabil
Der Ständer ist wirklich sehr stabil und lässt sich leicht montieren. Er ist zwar nicht filigran, aber er ist gut lackiert.
E**P
Genial
Aguanta perfectamente la bici mientras subo y bajo a los niños del remolque. Con la pata original la bici siempre se caía. Estaoy encantado.
A**N
Great quality.
Very happy but I thought it was a little pricey
M**A
Buen producto
Es fuerte pero para una bici con sillita de niño y cesta delante no es suficiente. Fácil de poner y quitar
B**N
Elle fait bien son travail.
J'aurai mis 5 étoiles si cette béquille était livrée avec la contre plaque pour la mettre en place.Elle est pratique à utiliser et le vélo tient bien.
M**A
ok compra, repetiria
Funciona muy bien y proporciona perfecta estabilidad (mi bici pesa mucho) , una vez coges el truco de como se usa porque lleva un sistema que no conocia .
M**O
I already had the BV 2 legged kickstand also sold on Amazon for $18 and thought it was a pretty good design
Ordered this kickstand after reading reviews here and other places. I already had the BV 2 legged kickstand also sold on Amazon for $18 and thought it was a pretty good design, but was willing to try something that might be better. M-Wave 2 to 1 Dual Kickstand and it is IDENTICAL to the BV kickstand plus the BV comes with ALL mounting hardware. Returning the M-Wave... By the BV unit.
F**E
Compatible with 700c (29") wheels & comes with mounting hardware
Installed on an a 75+ pound eBike (conversion) with 29" wheels. Most of my bike's weight sits on the rear wheel which rests on the ground, so very little weight is over the kickstand. With stand extended, my bike sits upright (no tilt). I was able to adjust the stand to where my front wheel is about 1/4" off the ground with very little extension of the feet. Adjustment is via screws through mounting holes in the hard plastic "feet" through a threaded hole in the steel leg. Comes with all mounting hardware in case you don't have a bracket on the frame. Frame mounting uses a 14mm hex head bolt - easier to work with in the tight space I have. Vendor's customer service was great when I was trying to get the dimensions of the top "pad" that fits in my mounting bracket. I was able to reach them by phone.
Trustpilot
1 month ago
1 month ago
