VDIAGTOOL V210 Wire Tracer Circuit Breaker Finder, Automotive Circuit Tester Open & Short Circuit Finder, Broken Wire Detector Tool Cable Tracker Break Locator Electrical DC 6-42V Low Voltage

This tool has two parts, a transmitter that puts a signal on the wire to be tested and a receiver that makes an audible tone when the signal is detected. The transmitter is connected to the wire or cable with a broken wire and then the receiver is moved along the wire and the tone changes when the tip of the receiver is above the short or break. The tool works very well and greatly simplifies finding broken wires. It's quick and easy to use and will save a LOT of time chasing down wiring issues. It's a great value and quickly pays for itself in saved time alone.

As a master automotive technician with over 23 years of hands-on experience majority of my day to day involves in diagnostic work. I'm always on the lookout for tools that make the job more efficient and accurate. The V210 has quickly earned a spot among my daily go to diagnostic tools, especially when it comes to chasing down wiring issues like open or short circuits. Recently, I had a vehicle with an open fuse issue caused by an alternator wire that had broken at the connector and was shorting to ground. Using the V210, I was able to quickly pinpoint the issue without any guesswork. The process was smooth and painless, this tool made a potentially time consuming job quick and straightforward. What sets the V210 apart is its simplicity and effectiveness. It’s compact, easy to use, and extremely helpful for electrical diagnostics. If you do any kind of wiring or circuit work, this is one of those tools that will absolutely save you time and headaches. With all that being said, I do have two suggestions/recommendations that I hope the manufacturer considers in a future update: Continuity Testing with Audible Tone, Currently, the tool uses an LED indicator for continuity checks. Adding an audible tone would allow users to hear confirmation without needing to keep their eyes on the device, especially helpful in cramp areas like under dash or when working alone. Receiver LED Indicator: The receiver unit relies solely on an audible beep, which can be difficult to hear in a noisy shop environment. Adding an LED visual indicator would make the tool more accessible, especially for those who may be hard of hearing or working in loud areas. Overall the V210 is a highly capable and user-friendly tool that’s already proven its worth in my daily workflow. With a couple of small improvements, it could be nearly perfect. I highly recommend it to any tech who regularly works with vehicle electrical systems and it's very affordable!

I picked up the VDIAGTOOL V210 mostly for basic automotive electrical diagnostics, and for the price it’s actually performed better than I expected. It’s lightweight, easy to set up, and the included 9V batteries are a nice touch so you can use it right out of the box. I’ve used it to trace a couple of open and short circuits on 12V car wiring, and the tone/LED indicators work pretty well once you get used to adjusting the sensitivity. The probe is flexible enough to reach tighter spots, and I was able to follow wiring harnesses without stripping insulation, which saved a lot of time. The tool isn’t perfect — the signal can be faint at times if the wire is shielded or buried deep in a harness, so you have to reposition the probe and tweak the sensitivity knob. It also seems to depend heavily on having fresh batteries. But once you figure out how it likes to be used, it becomes a pretty reliable helper for DIY troubleshooting. Overall, for around twenty bucks, it’s a solid little wire tracer that does what it claims. Great for hobbyists and good enough for most everyday automotive and small DC electrical work.

I've been happy with this tool so far. It was easy to set up, connected quickly, and the menus were easy enough to figure out without spending a bunch of time reading through the manual. It has done everything I've needed it to do. I bought it mainly to work on my 2008 Mini Cooper S. The car had a no-start issue, and after checking power and grounds, I used this tool to see why the DME wasn't communicating. It helped narrow it down to a shorted wire in the DME wiring harness, which ended up being the actual problem. That alone saved me a lot of time chasing parts that weren't bad. If you do your own repairs and diagnostics, this is a solid tool to have. It's easy to use, has plenty of features for the price, and has already paid for itself on one repair. I'd definitely buy it again.

This is well worth the money. I had a parasitic draw in one of my old trucks. Had already narrowed it down to the brake light circuit. Used this to trace the wires and find a bad spot in the trailer harness pigtail. It saved me a ton of time. I have other tracers that are built into other multi function units, but this is so simple and easy to operate. Already my go to for wire tracing. I have some other products from VDIAGTOOL and they work very well also, so I definitely trust the brand. For the cost of this unit one use and it pretty much pays for itself. Also 2-9 volt batteries were included with unit.

Not happy with this product. Is and was not able to trace wires further bacc in engine. If the wire is straight maybe but wat about the wires behind engine and behind instrument panel. Waste of money.

If you're a professional Auto technician or a do it yourselfer, this is a very inexpensive tool that you should have in your toolbox. I have used it several times and it's saves me lot's of time in finding a broken wire in a harness on vehicles. Takes the guess work out of wiring shorts and faulty wiring harnesses. The sound is adjustable "handy with ambient shop or vehicle noise" It's accurate, easy to use Led is bright and easy to see . Pays for itself the first time you use it. With late model vehicles basically being a big computer with many electronic controls in order to operate everything in the vehicle, on a broken wire of any length or a short can make it hard to diagnose a problem, A good scan tool might not discern a a break in a wire or harness, and show a code. So this enables you to find out why your getting a fault code, when the real problem isn't the sensor or control, but the communication from the ECM to the control due to a break in the wire. This company also has a large line of great testing equipment to work with this probe. You owe it to yourself to check them out. I made my purchase on Amazon, so if I didn't like the tool or had a problem with it, it's no problem because I could have returned it. Sorry that I didn't take any photos, but the instructions that come with the tool are straight forward and easy to understand. Plus there are videos on you tube and such on these tools. Hope that this helps you out. Keep spinning those wrenches and making $$. God Bless

Works ok

Très belle autillage

I’m very happy with this purchase. The VDIAGTOOL V210 is well built, easy to use, and works exactly as advertised. It quickly helped me trace automotive wiring, locate open circuits and shorts, and diagnose electrical problems without having to remove large sections of the wiring harness. The receiver is sensitive, the flexible probe makes it easy to reach tight spaces, and the transmitter is simple to connect. It has already saved me time when troubleshooting electrical issues, making repairs faster and more accurate. Another thing I really appreciated is that it comes with a user guide/manual. The instructions are clear and helpful, making it easy to understand the different functions and get started, even if you’re new to automotive electrical diagnostics. Overall, this is an excellent value for the price. I highly recommend it to DIY mechanics, automotive enthusiasts, and professional technicians looking for a reliable and affordable wire tracer. Definitely a worthwhile addition to any toolbox!

Los demás clientes deben saber que el aparato puede ser buenísimo, pero las instrucciónes, creo que en contraposición con las leyes actuales, vienen solamente en inglés. Es vergonzoso.

Got this item yesterday, today I traced a wire which would have taken me awhile to find. I found a problem within minutes. A must have in every garage.

Je divise une maison en deux appartements, donc je dois créer deux réseaux électriques indépendants. Merci à cet appareil génial qui me permet de repérer chaque fil et quelque soit la longueur (du garage au grenier par exemple). C'est un temps fabuleux de gagné et surtout on le fait seul, pas besoin d'être deux personnes.