ECO-FUSED Adhesive Copper Foil Tape - Double-Sided Conductive - 0.25 inch (6.3 mm) - EMI and RF Shielding, Paper Circuits, Electrical Repairs, Grounding, Arts and Crafts

Using this to make DIY capacitive touch pads for an ESP32/Arduino project (see photos showing wire soldered to a rectangular copper pad made from this tape and an adhesive copper pad stuck directly to the inside of a polycarbonate enclosure).Solders easily with standard multicore lead solder and the solder heat (using here 305 deg C) does not distort the copper or bubble the adhesive on the back with short periods of soldering - the heat quickly spreads evenly throughout the thermally conductive copper rather than melting the adhesive directly below. Works really well for soldering to and solder flows nicely on the copper surface.Adhesive on the back is strong and will reliably stick to polycarbonate project enclosure box sides without lifting or curling at the edges. Polycarbonate has a reasonably high surface energy and I would expect the tape to stick well to similarly high energy surfaces.An ideal low cost tape for RF shielding on projects or for making things like capacitive contact pads. Not too thin and holds its shape when you come to stick it to something. It may crease slightly when removed from the backing, particularly if mishandled, but is easily smoothed out when applying to get it looking flat again. Tests with continuity meter confirm the adhesive is conductive, I measured about half an ohm from front through to the adhesive back so you could layer and overlap multiple strips of tape inside an enclosure to provide shielding to all sides.Recommended.

Soo much better than using slug pellets. It's still on the planters outside and working well from last year. I put tape near the bottom of the pot (to save tape) but if you are feeling vindictive put it at the top. 🙃 I also cut the bottom out of the plastic pots that young plant were in, put tape around the top and planted them in the garden.

Tape sticks well.I bought it to try to stop snails and slugs attacking my plants. It doesn't work. That's the only reason for 4 stars.

Purchased this for my dad who has a big slug problem after I successfully used some to create slug barriers around my plants. He was pleased and it seems to be working for him to, obviously it doesn’t stop them completely if they are already in the sold or use another plant as a bridge but it’s certainly reduced the amount of damage. Easy to use, we tape it around pots, containers and homemade slug rings by cutting off the bottom of plant pots or margarine tubs to put them around plants in the ground. Would buy again

I bought this tape specifically because I wanted a double sided conductive tape and the description clearly states this item is conductive on both sides. Having received the tape and tested it I can assure you that although the non adhesive side is brilliant with about 0.3 ohm resistance, the adhesive side is completely non conductive or greater than 10 megohm at least. Don't buy if like me you wanted double side conductive tape!

I've used a few of these types of tapes in my time of working on guitars. Some good, some not so easy to work with. I have to say that this has been the easiest to work with and I'm glad that I bought two rolls. Sticks well but not so that it can't be moved and the back is really easy to peel off... one of my pet peeves when this isn't the case!

This tape works well for shielding guitar cavities. Easy to cut to shape and the backing paper peels off easily. The copper tape without the backing has a tendency to roll up and stick to itself so it takes a bit of practice. Sticks to surfaces really well - smoother surfaces best, but will stick to the rougher wood too. Also stick to pick guards well. Overlapping the tape gives good electrical continuity, so can be used to make bridged front and back cavity Farraday cage shielding for strats, etc. Have used it on a refurb of an 80s super-strat, and a traditional style "partscaster" build - works great on both. Seems to work quicker and better than the conductive paint stuff which is generally too much of a faff to bother with. Will use this stuff on all my builds going forward. Recommended.

Most adhesive copper foil has the disadvantage that the adhesive is non-conductive; hence, sticking one piece on top of a broken track on a circuit board won't work, you would have to use conductive silver paint as well to get a connection. So I was highly skeptical about this product, given that it costs about the same as regular copper foil.I stuck two pieces together and my multimeter reports that they are in electrical contact. So this stuff does indeed work as advertised and will come in very useful.

This copper foil tape has been a lifesaver for my electronics repairs! I recently used it to fix a loose connection in my game console, and it worked perfectly. The adhesive is super strong, and the tape is highly conductive. It's also easy to work with and conforms to different shapes. If you're into electronics repair or DIY projects, I'd definitely recommend this copper foil tape.

Ik gebruik deze tape om antenne's te plakken op (auto)ruit. Laat zich ook geweldig goed solderen. Handig!

Good

Good

Ótima relação qualidade preço!