KLEAN-STRIPAircraft Ultra Paint Remover - Powerful Formula Strips Automotive & Metal Coatings, Visible Lifting, Fast-Acting - 1 Quart

Works very good. Poured it on and brushed it fairly thick. Covered with plastic and waited about an hour. Took the paint off of an Ingersoll Rand 120-gallon compressor tank that I'm turning into a horizontal offset smoke. A few spots were stubborn, but I probably spread it too thin. Ventilate well and make sure you use a good respirator, because the fumes are NASTY!

This stuff worked very well for my application although I needed to put a layer of plastic wrap over the top so it wouldn’t evaporate so quickly during a mildly warm day this allowed the chemical to stay on longer and work longer

I used this to strip the paint from my gravel bike and it worked great. Just be sure to wear a respirator because the fumes are strong. Best to do it outside. Once it’s applied don’t let it dry after a few minutes pick a spot and wipe with a rag and wear gloves. The paint should come right off and you’ll see bare metal. Use plenty of clean rags so you don’t rub paint back on. In the end you’ll need light wet sanding to get total bare metal.

It worked

Almost as good as the original stripper before changing to safer (lol) ingredients. Removed 4 layers on old car after 3 coats but, fumes are horrible even with respirator.

Love how aggressive it was w automotive urethane paint. Made job easy

I have used many different kinds of paint strippers and have found this one to be one of the top three. Unfortunately the green products have never done well if you ask me and always take a lot more time and a lot more reapplications to archive what this one can do in one. Yes sometimes it does take one more application but that is all I have ever had to do even with multiple layers of paint. This is powerful stuff and you should definitely take caution when using this and read the entire label. It is on the pricier side but the basic stuff is like 30 dollars for the same size and believe me it is worth the extra money when trying to remove paint as nobody finds that fun.

I got this to clean hydrodip paint and film that was protected by a 2k clearcoat from an aluminum chassis. Worked like a champ. Use in a well ventilated area to avoid vapor fumes, I'd recommend using an organic respirator, not so much for the strength of the smell, but rather to protect from the caustic nature of it. It went on thick, held well, and worked surprisingly quick. I'm absolutely pleased with this.