Dremel Stylo+ 2050-15 Rotary Tool Kit with 15 Accessories, Engraving Pen

I use this tool to engrave mirrors. Im fairly new to it so its been nice to have a reliable tool. Makes the work easy when you have tools that are easy to use. Its a pretty strong little thing and does great. Highly recommend this if you are a hobby type. It has many uses.

Very useful if you need something with less power. I use these on smaller projects and don’t need a power dremel so this is great. I like to be able to adjust the speed a little depending what I am working on. It’s easy to use and good to go out of the box with comes with several extras that are nice value. These are small, slender compared to larger bulkier dremels and easy to hold. I do think it lasts a long time, I had one of these for a years and just purchased a second one to have when I have help around the studio.

I do a fair bit of carving and have used Dremels and Flexi Shafts for years. Holding a big Dremel for any length of time requires a lot of breaks due to hand cramping. Working with the Flexi shaft is better. but there's a stiffness to it, and if it's hanging, it tends to swing a bit which can throw off your pattern, not to mention the fact that as you adjust your hand to different angles, you sometimes exceed the bendability of the shaft and it will bind. So I got a Stylo. I think it's almost lighter than a pencil so no hand cramping. Actually it feels like a big pencil. Super good for fine detail work or removing material a little at a time. It will not handle heavy grinding or remove massive amounts of material all at once. it's not made for that. It does what it was designed to do very well. I love it.

This was great for what I needed it for. I did buy a separate burr that was bigger but the engraver itself was good. I did have a hard time changing the burr and keeping it in place but I’m sure it’s just user error. It’s not really great for detailed, fine engraving, in my opinion. It it does the job if you’re in a crunch! I had to engrave this liquor bottle for a friend and this worked just fine. I didn’t want to invest in an engraver costing over $200 so this was just the right price. Im sure it’s because of the surface i engraved on (glass) but there were some “skips” or jumps that kept me from do a nice clean line from time to time but nothing major. It is loud. So make sure you’re not engraving at night lol.

I used a great rotary tool that was private labeled for Craftsman and used it for years to do a few random things, but mostly for trimming my dogs' nails. It was small, but not as thin as this Dremel, and not terribly loud. Sadly, nothing lasts forever and it just wore out. Since I don't subject a rotary tool to heavy duty projects, I didn't want to spend a fortune, and bought a full sized tool from another respected name in power tools. It was OK but was disappointing in tat it had a plastic housing, which may or may not account for the vibration that didn't appeal to my dog. She tolerated it, but I'm sure the extra vibration (and noise!!) wasn't appreciated our nail sessions. So, I ordered this and while none of the reviews mentioned dog's nails, I gave it a try. My first impression when I opened the box was, "Wow, this is really small...", but didn't let first impressions define it. When I tell my dog that we're going to do 'beautiful feet' and grab the bag of Rawble that is reserved just for this as her special treat between grooming paws, she goes right over to her pillow and sticks her paws out for me. The first thing I noticed is that while it was really small, it was really quiet, which she appreciates as much as I do. On the highest speed it creates enough power to grind her nails quickly with the included sanding drums, and I maintain control of the tool easily. All in all, I highly recommend this tool for light duty work and it would probably preform nicely for more delicate craft projects, too.

Great little tool. I was a little skeptical on power as it looked pretty small. I engraved a bunch designs in hard maple and had enough power for what I needed it for. If you want to remove a bunch of material aggressively this isn’t made for that. Cant speak for it long term but happy with it after the first project.

Just what I needed, used primarily for nail work, the slow speeds, are perfect. It'd light weight, the cord isn't heavy making it easy to use and maneuver I didn't want a rechargeable battery tool, everyone I know who has one complains, even the more expensive models are unreliable, the often don't recharge after a short time the cord on this item is flexible and light weight, the tool is well balanced and easy to handle, even for a small hand my only complaint would be the awkward, deep set power button I imagine they wanted to make sure you didn't accidently turn it on and off but, the button is awkward and poorly positioned, you can't easily turn it on and off as you work with it, it takes a bit of shifting grip and very deliberate pressure on a area of the tool would hold to give the best grip. I've had cheaper tools with a better placed power button but, this has the smoothest sound when running and the most subtle speed control. most of my Dremel tools, have lasted a very long time

I do all types of crafting & I'll be able to use this with so many projects. It's really lightweight & easy to handle. I love how long the cord is. I was a little concerned that after 15 min on only speed 2 the machine started getting pretty warm. I wanted to see if this was going to be an issue so I turned it up to speed 3 & used it for another 5 minutes. It didnt seem to get any warmer than it already was & kept working fine so I decided to just take short breaks after every 10-15 min just to be safe. Since this is the first time I'm ever using a dremel, I don't know if it's common for them to get a bit hot like that. I'll check to make sure there's no risk of burning up the motor & if not, then this has become my favorite new gadget! I haven't even gotten into the etching or other projects yet, but I'm already in love with just the couple things I've done so far. I'm excited to learn about all the different end pieces & what they each do. The project possibilities are seemingly endless with this tool. It states that its quiet enough to use indoors & although that definitely is true, the mess that was left from the wood I was sanding & carving would definitely NOT have been something I'd be happy about having indoors, save for maybe a garage workshop. Overall I'm beyond pleased with this purchase & would highly recommend to any crafter or artist! Thank you for a wonderful product!

Price is quite high. But product is outstanding.

Muy buen mototool, funciona perfectamente y la calidad que tiene es increible, la potencia que tiene es muy buena, todas las piezas que mencionan estan incluidas. Una herramienta para diversos trabajos para darles un toque mas artesanal y diseños increibles. De igual forma se puede adquirir el eje flexible para tener mas movilidad, pero esto dependera de cada persona.

Just arrived, but can't use, as it's got a US style plug, so I'll have to go to unanticipated additional expense to get a UK plug, assuming that that's possible. As it's being sold on Amazon UK, it's reasonable to assume that the product is UK compatible.

I got this dremel stylo for sanding down the nubs left from supports on 3D resin prints, it works great. Up until now, I've been using manual hand files to sand down the nubs. I specifically wanted a low RPM option that wouldn't be too aggressive while sanding delicate resin pieces, this fits that need. Level #1 has 5,000 RPM and is just right for sanding the resin, the slower speed allows you to have more control of how much resin is sanded without being too aggressive. I have not tried it yet on PLA prints but I'm sure it will do fine, perhaps at a higher RPM (there are 5 levels). I have a full sized dremel with the flex shaft but it was hard to control the proper low speed, and not nearly as precise to use. This stylo feels like holding a thick marker, it is very light which allows for some really intricate, detail sanding in tight spaces. It doesn't vibrate much and is not loud at level #1. I do wet sanding by dipping the diamond ball point in water continuously while sanding to drastically reduce the amount of resin dust in the air. The tool didn't get hot after about 30 mins of use at level #1. Overall, I'd recommend this tool for those wanting an easy, precise way to finish 3D resin prints. It will also work great for finishing traditional, cast resin pieces.

Muy buena herramienta práctica y de uso rudo la recomiendo mucho, manual y no pesa nada yo la uso para hacer agujeros en las placas de circuito impreso y trabajos de manualidades.