AFI, Orlando Full Modern Solid Wood Panel Headboard with Attachable Charger, Light Toffee

This headboard was so easy to put together and it looks fantastic with our matching nightstands and dresser. Couldn’t be happier.We also really like the USB charger that comes with it. We were able to mount it behind the headboard so it doesn’t show when looking at the board from the foot of the bed.

It's solid and the finish is great on all sides. It is a low headboard so measure your frame height and mattresses first and compare that to the two height options of the headboard, especially considering how thick some mattresses can be. The low setting is quite low and might even get completely covered by some mattresses.It's simple to assemble, but easy to make mistakes if you don't have instructions. Mine didn't.First, there's a top and bottom to the headboard. This sounds obvious, but the gap between the first hole and the edge on the top is a little less than 2" while the gap between the bottom edge and the first hole (first relative to the edge) is somewhat less than 1". It's not that much difference that you can be sure. Plus, some of the holes will line up perfectly with those on the legs, making it look like it should be that way. But, if it looks like this - like there was a manufacturing mistake - and like you need to drill a few new holes.... No, that means that you have the headboard upside down. Rotate it and everything works.Second, make sure the legs are oriented correctly. Of course, the side with lots of holes is the side that connects with the headboard. Also, the slots that connect to the frame should be on the outer side, screw holes on the inner side. This works for frames that use slot/hook connections or screws.Third, since the screws are not going through to the other side, the sequence is: screw, lock washer (the split ring thing), regular washer. Just insert and screw until tight. For those unfamiliar, the lock washer will not fully flatten.Finally, insert the wooden dowels (with or without glue) into the LEGS and shove them in more than half way. If you don't shove them down enough or insert them into the headboard first, it's very easy to have them create a bulge or even crack the other side, defacing the headboard. No, the headboard is not thick enough to prevent this and the pegs will not move sooner than the wood will bulge. ... I was only given two dowel pegs. This is enough for mine since the headboard is not going to take any real strain being against a wall. If yours might, measure the ones given and get a couple more - they're not expensive and they add a lot to stability. Use wood glue on both sides of the pegs/holes when inserting them.Also, be aware of things like differences in height because of levelers/uneven flooring. My frame is actually on a rug while the legs of the headboard are not, so I had to put pads on them so they would support their own weight and not hang by the screws. Did not realize this until everything was fully assembled - no fun at all to get those in place.

This item was easy to assemble. It was worth the money and is very sturdy.

This low profile headboard was exactly what I wanted because it doesn’t block the window. And the charger was a plus. We had trouble with the directions so we had a handyman put it together—I’m glad we did that, in order to get the correct height. And given the low cost of the headboard, paying a few bucks to attach it was fine. Love the color and it matched the wood bed. Perfect.

Not bad, perfect for a low profile head board. Made well and solid. It has held over 4 months.

I'd actually rate this 2 1/ stars.Product arrived with a 6 inch scratch on the back of the headboard. The box contained a sticker saying if the item arrived damaged or defective to write to [email protected]. The address will not go through. So I looked up Atlantic Furniture and wrote them an email. They said they do not do online orders. So, we kept the headboard as the scratch will be against the wall and we needed it for guests arriving this week. The color matched our other furniture. It was fairly easy to assemble, and the size fit what we needed. Hubby liked that they gave spare parts. this is similar to typical inexpensive knock down furniture from Ikea or Kmart.

Item arrived intact, but somewhat dusty. Began mounting the legs on the headboard following instructions exactly. Had first leg positioned over bolt holes but saw they weren't centered over the thread insert. Thought I could work with this a little, but could simply not get the allen head bolt to engage. BTW, any manufacturer using this type of hardware should be avoided. So tried just threading in the bolt as is and saw the insert was not put in level. It was slightly angled, but tipping bolt a bit got it to thread in. Unfortunately, when putting bolt through the thickness of the leg, this is not possible. Then also noticed thread insert had about an 1/8" before the threading actually started. Pic enclosed. Just for giggles, I put the bolt thru its leg hole to see how much of it protruded, and it simply was too short to reach the threads in the insert. Now there are a number of remedies I could employ to make this work involving making the holes a bit bigger and finding longer bolts. BUT THAT'S NOT MY JOB! Tried calling the vendor's phone number and got typical "we're busy with other callers". Not unexpected, so filled out their website form and we'll see what happens. Gave vendor two days to respond. Otherwise, Amazon gets this returned, and another black mark on this vendor's record.

Paired this walnut headboard with this platform bed; Yaheetech Full Bed Frame Deluxe Natural Solid Pine Wood Platform Bed, Reserved Holes for DIY Headboard/Wooden Slats Support/7.5″ Clearance Space/No Noise/Easy Assembly, Smoked Walnut Full Bed. Love it. Had to drill the bed, but everything lined up nicely. Needed a bed to fit under a window, this adjustable height was perfect. Walnut color is lovely, only the slightest auburn in the sun. For the price it can’t be beat. Arrived in perfect condition, however one hole was drilled a little deep. Could be why one reviewer went through the front with screw. Tables are 26.5 inches high for reference, 14” memory foam mattress, headboard sitting at approx 35 inches.

It was exactly what we wanted - king size - and it was delivered to our door!! We had no way to get it home ourselves so ordering on line worked really well. Easy to attach to our bed frame