Nilight 4 Pin Trailer Wiring Harness Kit 56468 Vehicle Standard 4 Way Connector Custom for 2021 2022 2023 2024 Ford Bronco with LED taillights Simple Fit Tow Hitch Harness Review: Works as it should with the Bronco's LED tail lights - I've had this installed for about a month now and I've pulled my trailer a few times and not had any issues with the lights. Based on my experience with other Nilite products I expect to not have any issues. That said I would like to make a recommendation on how this trailer wiring module/kit could be better. The instructions show how to mount the module on the frame and route all the wiring behind the bumper and this works well. My improvement would be to extend the leads for the right side taillight by 2-3 feet(600-900mm). This would allow a person to install the controller inside the vehicle on the driver side where the factory module would be located, if desired. Other than that improvement suggestion, the install was easy and it works like it should. Review: Working well so far. - Was fairly simple to hook up. Only thing missing from the instructions was it did not describe how to connect the power wire directly to the battery. Did not mention the power wire at all in the instructions. There are a few videos on Youtube to help with this. One's I have connected in the past did not have a power wire so this was little confusing for me. I'm guessing this one does because of the LED lights but I'm not sure about that. Had a few issues with the lights going on and off but this could be due to the ground wire not being 100% grounded. After using a few times now, the last time I used it I did not notice the lights going on and off so maybe after driving a little the ground rubbed off some of the powder coating and is connected better. Another thing to note is that the bolts that attach the holder for the 4 pin connector are so long, I cannot use my trailer hitch locking pin. You have to insert the pin on the left side and the bolt gets in the way. The locking part has to be on the right side so you can access it with the turning key that you use to unlock it. I may see about taking out the bolt and cutting it shorter if I can do it without messing up the threads. Or just buying a shorter one at my local Ace Hardware.
| ASIN | B0D99S8K3R |
| Brand | Nilight |
| Cable Type | Flat Ribbon" or "Trailer Towing (custom) |
| Connector Type | 4-way Flat Trailer Wiring Connector |
| Connector type | 4-way Flat Trailer Wiring Connector |
| Customer Reviews | 3.7 out of 5 stars 43 Reviews |
| Included Components | Custom 4-Pin Trailer Wiring Harness*1, Zip tie*9, Screw*1, 10A fuse*1, Extensive battery connection wire*1. |
| Item Dimensions | 20.3 x 7.6 x 10.2 centimetres |
| Item Type Name | Trailer Wiring Harness Kit |
| Item dimensions L x W x H | 20.3 x 7.6 x 10.2 centimetres |
| Manufacturer | Nilight |
| Manufacturer Part Number | 51062TR |
| Material | Rubber |
| Model Number | 51062TR |
| Number of Items | 1 |
| Number of Packs | 1 |
| Number of items | 1 |
| UPC | 840323927161 |
| Unit Count | 1.0 count |
A**M
Works as it should with the Bronco's LED tail lights
I've had this installed for about a month now and I've pulled my trailer a few times and not had any issues with the lights. Based on my experience with other Nilite products I expect to not have any issues. That said I would like to make a recommendation on how this trailer wiring module/kit could be better. The instructions show how to mount the module on the frame and route all the wiring behind the bumper and this works well. My improvement would be to extend the leads for the right side taillight by 2-3 feet(600-900mm). This would allow a person to install the controller inside the vehicle on the driver side where the factory module would be located, if desired. Other than that improvement suggestion, the install was easy and it works like it should.
A**R
Working well so far.
Was fairly simple to hook up. Only thing missing from the instructions was it did not describe how to connect the power wire directly to the battery. Did not mention the power wire at all in the instructions. There are a few videos on Youtube to help with this. One's I have connected in the past did not have a power wire so this was little confusing for me. I'm guessing this one does because of the LED lights but I'm not sure about that. Had a few issues with the lights going on and off but this could be due to the ground wire not being 100% grounded. After using a few times now, the last time I used it I did not notice the lights going on and off so maybe after driving a little the ground rubbed off some of the powder coating and is connected better. Another thing to note is that the bolts that attach the holder for the 4 pin connector are so long, I cannot use my trailer hitch locking pin. You have to insert the pin on the left side and the bolt gets in the way. The locking part has to be on the right side so you can access it with the turning key that you use to unlock it. I may see about taking out the bolt and cutting it shorter if I can do it without messing up the threads. Or just buying a shorter one at my local Ace Hardware.
D**E
I do not recommend this product.
2022 Ford Bronco. The product does not work as intended. The left turn signal activates the hazards on the trailer. The right turn signal activates nothing. Brake lights, running lights and hazard lights work as expected. This has been verified with two out of the box kits. See videos attached. The instructions are minimal. They’re usable but could be improved upon. Customer service is horrible. They only talk through text and you only get a response every two or three days with minimal response communication. They did send a new kit but I ordered this in January 5th 2025, I have been trying to fix this issue for a while now. At the time of writing this it is August 15th 2025 and I got the replacement yesterday for it to have the same problem. I am looking to return it and go with a different brand with better customer service.
J**E
Perfect fit
Works great and did take some time to install but works great. The longest part of the install was routing the black wire to the battery I just wanted to do that right so took a little longer.
J**L
Great 👍
Be careful when ordering..Some of the Broncos came with led and some came with hiligen
Trustpilot
2 months ago
1 week ago