ANYCUBIC Photon Mono M7 MAX Resin 3D Printer, 13.6’’ 7K Large Resin Printer

I have been printing for a little while now and had the opportunity to pick up the Anycubic Photon Mono and jumped at it. Anycubic makes some really great resins and I decided to give their printer a shot. I have a Creality LD002R that I started on and will be making some comparisons where I can. For frame of reference - the LD002R is a great machine - but the Photon Mono would be more in direct competition with the LD002H model. Out the gates there are some things I love and some things I am not so fond of. First the good. Good: 1: I love how quiet this thing is. Compared to my Creality, the Photon Mono is next to SILENT. Very quiet. It is quicker than my other printers - compared to the LD002R it prints at about 50% faster speeds. It prints at about 20% faster than my LD002H. From what I have read it comes down to light intensity of the UV cure lamp. Its brighter and that results in faster speeds for more accurate prints. 2: Accurate: This machine gives beautiful quality miniatures (my principal use) with very little issue. One thing I do need to stress here is that this is not a great machine for a stock standard beginner. It does require a little bit of experience and knowledge in how to use your software. I went from using Chitubox with my Creality, to using Blender, Windows 3D, and Lychee slicer. If there are issues with the STL models you download it will create issues with your print. These three programs will help you find them and fix them. You will also need to know how to set up your supports. For how fast this printer prints, you will have loads of print failures if you don't have a firm understanding of how to set your supports. I recommend looking at all online resources here. You will also need to make sure you program the software correctly to interface with your printer AND YOUR RESIN combo. You can get really great speeds out of this machine if you set up your software correctly. I stress this is a SOFTWARE and not a printer issue. The printer is great, but the wrong settings will have you cursing the day you purchased your machine...and I guarantee you will find the issue with your resin or printer settings in your slicer software or because of a artifact issue in the print. Bad: (these are more preference things than any true issues with the machine) 1: The lid needs to be completely set on the machine for it to work. If the lid is off even a small amount it will result in the print not proceeding. While this is a great safety and exposure feature, it is a small annoyance if you have any little bit of something on the lid base causing it to not make a full connection. 2: The FEP: This is actually a big deal for me. In the picture you can see that the FEP is a full solid assembly. You cannot replace the sheet using the tools given. The FEP is pressed into a frame - making it resilient but if you are careless and set it down and get a deformity or hole in the FEP, the replacement is $35 and when I have tons of replacement sheets on hand for my other machines - its just a hassle to have a specialized FEP that you either have to keep on hand or purchase a third-party part to use your existing FEP sheets. I ended up purchasing the Sovol 3D Resin vat that fits nicely and comes with nice silicone covers for when they are not in use. That all being said, the Resin vat is a great design, comes with a pour spout corner that is very useful for straining resin back into your bottle. As to the other things that come in the package, I was not surprised to see the traditional stuff, the Allen wrenches, the resin strainers etc. What I was impressed by were the masks, gloves and super sturdy wooden handled scraper. everything else I have ever received have been plastic handled or small, but this was a solid piece of kit to have. Overall - this is a solid, well built machine that I will use for a long time. I recommend the Sovol Resin vat and either flex build plates or roughing up the original build plate with a bit of steel wool. 4.5/5

Read the reviews. "Wow" "Excelente" "Muy Bueno". That about sums it up. This is truly an exceptional machine and I'm just fully tapping into its full potential. I've had mine a few months now. It was a rough start. The LCD screen was out in one section on the start up test, though this was likely shipping damage. Anycubic was immediately responsive and within 2 emails I had a new LCD replacement kit in a few days. The swap was very easy and I was off and running. I'll note that I've had an Anycubic Photon M3 max for about 3 years. Possibly the best one ever made. I've used it for small scale production of some finished parts, and it has been bulletproof and paid for itself many times over. Just before buying this one, I upgraded it to ACF film, jacked up the print speeds and it was fully next level and I was smitten. Yet even from that point of view, the M7 has totally blown my mind. It prints ridiculously fast. You can't believe it when you see it. Yet it produces mind blowing accuracy. You can only see layer lines on flat surfaces. Anything with texture blends them out and it looks as good as molded. Your prints actually shine. Compared to even my M3 Max on steroids, it effortlessly outperforms it. With the equally amazing Pro2 resin, 12 hour prints barely take 5 now. And they're just gorgeous. Also the build plate is massive. So you can fit even more prints on a plate than even the M3 max. Altogether this slashes time tremendously. So when prints are done there's a little hangy thing for the build plate, and a button in the software that lets you raise the print bed 50mm in one tap. This lets you hang the plate under the platform frame at a diagonal so excess resin drips away quickly. The plate goes on and off easily and the removal process is the same as any resin printer's. BUT THEN...the star of the show. The resin sucker. It has a resin sucker! You go into the post print 'cleanup' menu and tap 'retrieve'. A little tube and sensor drop down and suck the resin out of the vat into the autofill bottle. Its not crazy fast and you have to help steer the resin towards it with a spatula a bit, but it will eventually suck the resin vat almost completely dry. The cleanup from there is negligible. Its amazing. I dump the resin from my M3 in there too. 95% hands free cleanup. The flip down lid is a great touch too. The cover for my M3 Max is huge and I never have anywhere to put it when I open it. This one flips pretty easy and stays up when you want it to. It also drowns out pretty much all of the motor noise. That said the internal exhaust fans on this printer are definitely loud. Overall its louder than my M3. Not offensive, and not as loud as an FDM printer, but definitely noticeable. As far as software interface goes, I admit to having my own weird preferences about things, but overall the software is pretty solid. I never had any issue intuitively finding the features or settings I wanted, and most everything is explained. Same with the Workshop software. I was pretty used to the M3s Workshop and didn't feel great about the new version at first, but its actually much better once you get into it. Slightly less user friendly (to me), but far more capable. Once you get the hang of it its powerful. I really just have almost no complaints about this printer. Besides that the wash station is kinda junk, but that's a different review. I can't yet speak to its durability, but the durability of my last one paid for this one, so I'm optimistic. For the price, this machine is just so capable and powerful it reminds you you live in epic times! Get this thing and get ready for some BIG fun.

I've been 3D printing for over 5 years and printing with another companies resin printer for the past 18 months. I was spoiled by its ease of use, but it was also expensive to operate so I didn't use it as often as I would have liked. Curiosity finally got the better of me and I picked up this Anycubic Photon Mono just to see what these little LCD printers are really capable of and I can safely say I'm blown away by the print quality. Once you have a process that works, its very easy to use. Just expect a learning curve. When I was waiting for the printer to arrive I submersed myself in all the YouTube videos on the subject that I could find. Turns out this was a good thing AND a bad thing. Based on all this new found "knowledge" and thinking I knew better, I forged my own path for my first print and sadly it was an utter failure. Based on the videos I had watched I started ordering resin trays and FEP film but due to my inexperience, I ordered all the wrong things. Long story short after a comedy of errors and a half dozen failed prints I finally hit upon a winning formula that I've been able to readily duplicate across half a dozen successful prints now. The printer gives you most everything you'll need to start printing right away. Everything except the resin, and depending on the type you get you may also need isopropyl alcohol to clean the print which for some reason is still hard to come by. I bought the Anycubic Craftsman resin and have been super happy with the quality. Some of the things I learned during my first couple weeks-- --When you have a failed print, make sure to clean out the resin tray otherwise the next print will be adversely affected --Some of the resins are extremely bad smelling, some protection is recommended --You will eventually have to replace the FEP film, however the most popular videos on YouTube show a product and process that is out of date. --There is definitely a learning curve you can only get past by experience. All the video watching in the world can't prepare you for every little hiccup, especially when so many videos contradict those of other channels. So like everything there are pros and cons, so from my perspective, here are mine-- PROS --Printer is super easy to use and setup once you know the process --Very inexpensive to operate relative to high end solutions --High quality print results that surpasses expectation --Comparatively fast, prints an entire layer in one go, taking just a couple seconds of exposure CONS --Initial learning curve, you need to understand burn-in layers, exposure times and lift speed and half a dozen other settings, yet none of these options are really clearly explained, nor is it covered how they affect the final result. --It can take a couple hours before you can see if there's anything on the build plate, I wish there was a way to know earlier if a print failed. --There are so many options for resins available, yet there is very little data on what settings you need for a particular printer/resin combo so some educated/guessing will be necessary. All in all, I'm super happy I took the chance on this printer, as I've done so much printing, trying different things now that I would never have considered with my other printer mostly due to speed and cost. I'm sure next I'll be looking to upgrade to its big brother.

Note: I will not go into a comparison between FDM and Resin 3D printing for this review. Pros: Simple set up Intuitive menu High quality prints Entry level friendly Very high tolerances Consistent Cons: Protection of the LCD screen Mishap clean up Quirks: Touch screen controls are slightly off Background: I am an engineer and I have been designing components to work with 3D printing and 3D printing since 2012. This is my first resin 3D printer after a history with FDM and designing a SLS 3D printer for printing nylon. I originally chose to purchase a 3D printer with the intent to print custom connectors for robotics applications, small components with high tolerances, prototypes, small scale production, and a few figurines. Detailed Review: The setup is very simple with all tools provided and little room for error following simple instructions which when combined with the intuitive menu that gives you a preview of the print makes this an excellent choice for someone getting into 3D printing or switching over to FDM. I was incredibly surprised with the precision of the prints, the amount of details, and the final processed measurements. The quality of the print has actually required me to model more components such as threads, cogs, and gears rather than use someone else’s model due to fitment. (Those models will still work fine for most hobby applications but for precision applications with limited slippage or precise alignment it is better to design to your machine) It is important to note that I find that the cover does an excellent job at keeping the smell of resin out of the room, but it is highly recommended that you keep any open resin in a well ventilated area and use an appropriate mask if you will be around it for a long period of time such as a cull cleaning of the vat. I have been printing non-stop to test if the performance degrades and have found no issues as long as I ensure that the build plate is clean and there isn’t anything stuck to the FEP. An inspection of the device (from an engineering perspective) revealed a potential issue with how the LCD screen protected. The LCD itself appears to be protected by a layer of glass that is recessed from the aluminum plate. While this protects from being scraped by the vat, it could cause some issues cleaning if resin were to end up on the glass or surrounding aluminum. Glancing at other printers in the price range, it appears that all of the competition will have the same potential issue if Resin is spilled. As long as you are careful with the vat and research and test if you decide to replace the FEP, you shouldn’t run into any issues. One quirk I have noticed is that the touch screen controls appear to be slightly out of calibration making it easier to fat thumb things. I don’t know if that quirk is on all units or just mine but it is still easy to use and a stylus with a smaller effective area than your finger is fool proof (I still use my finger). Conclusion: Overall I am incredibly happy with this unit and would recommend that anyone looking into getting into 3D printing especially that of figurines. Potential users: As with all precision devices and machines, you should always research before attempting something new and maintain your machine. So get out there and find forums and youtube videos on how to get the best prints and take care of the printer. For the fellow engineers: Your selection of resin is very important for the durability of your parts. Print in place objects such as bearings are very difficult to cure as they typically have high tolerances in enclosed places where it is difficult for you to get UV light to do a full cure.

I wish I never bought it. I have been printing for 5 years with elegoo and always wanted a bigger machine. I hoped this would be the machine for me but after 15 prints and not one successful print, I am lost and 3 days over returning it and frustrated. No matter the settings, acf/feps I swap or replace i get terrible results. I dont understand how this machine has 4.2 stars and so many positive reviews. Problems: 1st: The Zaxis plate is so misaligned/installed incorrectly that ita about to take off the resin vat refiller as you can see if the photos. Its actually scrapping the front of it. 2nd: Build plate is and came warped. The build plate is not machined flat. As you can see the light in the photo 3rd: Acf film breaks easily. After 3 prints I had to replace my feb which ripped a small hole. 4th: The Vat refiller does not work. No matter what settings I try to get it to turnon, it refuses to refill the Vat 5th: Adhesion on the plate is extremely poor. After using 80, 120, and 180 on different prints it still does not stick. 6th: It keeps telling me residue detected on a fresh clean tank, plate, and filtered resin Pros: 1st: The wireless printing is nice 2nd: The slicer for anycubic is really nice Overall if I could return this printer I would. I havent had one successful print on this since i got it. No amount of settings I change or tweak I always get a failed print. In fairness, I have not contacted support, but I fear there is so much wrong with it we are in total replacement category. Im not sure im just at a loss. Im really disappointed this $900 machine does not work and came like this from the manufacturer. I saved up to buy this printer. Ive had twins both with rsv right now and been busy and I missed the return window and just frustrated. I plan to reach out to Anycubic for help and will change my review if they help me, but with Quality control letting units out the door like this is disappointing. At the moment I would not recommend buying this machine what so ever. Edit Feb 8th: Anycubic team has actually reached out to me offering to help through amazon. They seem willing to help with parts or replace unit. They emailed me Feb 5th. Will update after they get back with me!

I've been printing almost constantly and heavily on my M3 Plus for about 3-4 years now, and had 0 issues with it while performing proper maintenance. Last weekend, my FEP tore, and resin cured to my screen. I bit the bullet and got the M7 pro. The packaging is very nice, the printer is larger than my M3 (significantly), and overall the build quality seemed better. I got it setup, set my slicer settings (Chitubox), and printed a few cones of calibration to see how if I could get it dialed in quickly. After 3 cones of calibration, I thought it was ready and perfectly dialed in with my ABS-like 3.0 HD grey resin (my favorite for miniature printing), and proceeded to load up a build plate, and threw them in to print. First I put them into a folder on the USB stick provided, and couldn't find them... for some odd reason, this "better" printer can't read folders; that is a huge flaw in my eyes. With a fresh batch of resin, a clean build plate, I went to print. The M7 immediately throws an error saying the vat is blocked or something like that. I check the vat, do a UV flash "clear out" scrape the resin and double check it... there is nothing there. Proceed with the print, it goes as planned, but seemingly far faster than I had it set... The print finishes in 2.5 hours, and every single mini is a failure, but where it did not fail, the detail is superb. I adjust my settings, and do 5 more batches of minis... All a failure. I check the frequency on the FEP using an audio app, and it seems far too tight, so I adjust my settings in Chitubox for a 6 second light off delay. Now, my M3 prints flawlessly and quickly with a 2s light off delay, this now takes 3x as long on the M7 which boasts higher speeds. As in most 3d printing, higher speed = a trap. Also, in every single one of those 5 prints I did, after clearing the vat and cleaning the tray, I got the same error regarding the vat. I just bypassed it and kept on printing any way with no issue other than the print failurses, but that was due primarily due to the light off delay. I now have it 100% dialed in, and it prints .05 as fast as my M3 prints .02, but at equal quality. I guess I will call that a win? The printer is not without its flaws, and I'd highly recommend a M3 over the M7 due to price. The interface and extra bells/whistles on the M7 just seem to get in the way more than anything. I am dreading replacing the FEP on the M7, due to the heating element, but I bet that will allow me to reduce my light off delay back to 2s because I won't install it too tight (check out the gatorade cap method) and it will allow me to keep printing with ABS 3.0, albeit slightly faster? Also, the UI for the M7 is miserable and unresponsive. What happened to the translucent yellow cover from the M3!? At least I could see a failure far sooner than the M7 super dark cover! Also, the vat is huge and heavy, and the build plate always drips when being removed. If you let resin drip down the side of the vat, and get onto your covered or uncovered LED, goodbye printer (or scrape it like a surgeon for 4 hours like I did on my M3). So many minor design flaws that just add up to frustrating experience with a superb result. All in all, it is an expensive machine that can print well once you dial it in. I wouldn't recommend for a first timer unless you're going to use a more rigid resin or a high speed resin. But I like my stuff not to shatter immediately, so I don't do that. I'll do a test with Texture resin tomorrow when it arrives. Extra Tips: -Buy extra LCD screen protectors! I was able to fix my M3 and now have 3 printers going ham on a 4k point army. -Buy the magnet + steel plate! I have this on my M3 and M7. The M7 build plate is kind of a disaster out of the box. Sure, it looks nice, but the minute you go to get minis off, you will see raw aluminum, no matter how careful you are. -Increase the light off delay; reduce lift speed. I don't care what you're printing, this will give you more consistency and far less frustration. Included my settings in a screen shot for ABS like 3.0 grey. I hope this helps to save you some time dialing it in. The exposure could likely be dropped down to 1.2s.

The printer came well protected with all that we need to use it, also include glove and mask for safety. I have been 3D printing for around 4 years but with FDM printers with filaments, this is my first resin printer. The quality of the prints is excellent, we cannot get this quality with FMD printers. The printer is easy to use, just need to set the home position of the printing platform at you will be ready to print and is so easy. It just uses the paper that comes with the printer to set the "home" position on the printer. All the instructions are clear and easy to follow on the manual that comes with the printer. Recommendations: - Always for safety use gloves and a mask when manipulating the resin and the alcohol when clean the parts (if the resin that you are using need to be clean with isopropyl alcohol) . Better if the printer is located in a ventilated area due to the isopropyl alcohol and some resins have a smell but is not too much as I thought. - Follow the instructions that come with the printer and you will not have any issue and is also easy to use. - Have around cleaning towel paper to manipulate the resin, clean the parts, etc. - Print the test design that comes with the printer on the USB. With that you will ensure that the printer is working properly because this model is already prepared to print with correct settings etc. I did and the result is awesome (attached pictures). - I think the best idea is to print as much as we can to avoid the need to filter the resin back to the original container. Because when you will not use or finish the best is to filter the resin (some filter included) back to the container that came when you buy it the resin. - The printer came with software to process the designs but looking for information I found that most people use "Chitubox" software with the printer. The last version of Chitubox includes the printer with a profile, I did all my print with the original profile and then just change the layer height, but with the factory settings can do the job. - After the print finish, is necessary to clean the part depend of the resin with isopropyl alcohol or water. I found extremely useful to have one "first" container of clean and then the last for the final clean. Also, the isopropyl alcohol you can use several times until getting dirty from the cleaning process. -I also bought the ANYCUBIC cleaning and curing station (after cleaning the parts need to be cure in sun or with UV light). And is the best idea for clean and cure, helps A LOT. As mentioned, I also use an initial container to clean the parts and then with the cleaning station. - The only thing that we need to care about is the supports when processing the designs. But is something that we learn and is not so difficult, the general recommendation is to print at 45 degrees for a better layer and finish and you can use automatic support generation on the software and add more if you can see that some parts maybe need support to be print. Attached some pictures and videos of my use, am very happy with the machine and I will definitely recommend it.

After looking into and reading about 3D printing in general, I settled on waiting for the Photon Zero release - and boy did it pay off. I wanted a printer that could make detailed miniatures and this fit the bill nicely! That said, be aware that you definitely need technical aptitude and to do your research priot to 3D printing with resin. All of my prints I did using Anycubic ECO Gray or ECO Green. Pros: - Securely packaged and easy to assemble - was printing in 20 minutes! - Good instructions included with build plate leveling guide. - Resin exposure test on the included USB to get the best possible quality (Print this or the cube first!). - Included software supports 16x Anti-aliasing for smooth surfaces. - Comes with a sturdy metal scraper instead of plastic like other models. - Included gloves, mask, tools, paper filters. - The UV cover is easy to see progress through and masks resin odor well during printing. - VERY detailed, claims to support 0.01mm printing on their site, though I have done mine at 0.02 or 0.05. - You can pause and resume your print without having to wait for the whole thing to finish! Great for finding any mistakes you make modelling early, and not wasting resin. Cons: - Smaller build plate than most - not intended for large projects. - No extra FEPs or resin included, but easy to find elsewhere. This also keeps the price down I imagine. - Only supports .pw0 sliced files at the moment, not the usual .photon files. - The hobby itself still requires research! Look for help below. Here are some helpful guides/tips to get prepped: A.) Don't be afraid to ask/google for help! There are some great troubleshooting tips and plces to ask for help on the Anycubic Facebook group, and the /r/AnycubicPhoton subreddit. B.) Set up a digital workflow - figure out what software tools to use and in what order. I do the following: - First, I auto-orient the model(s) in Prusaslicer if needed, then export to a new STL file - Second, I add automated supports (75-85%) in Chitubox and hollow/add drainage holes for larger prints - Third, slice the STL and look for unsupported "islands" using Photon File Validator - Finally, set the exposure times and layer thickness in the included Photon Workshop, slice, and print! C.) Set up a cleaning workflow - Anycubic now sells a Wash & Cure station to greatly help with this, too. - Always wear gloves and a mask, and have paper/shop towels for cleanup. - After printing I remove the plate and scrape off the print with the included scraper into a bin. - I rinse for 15-30 seconds in rubbing alcohol, then in some cleaner like LA's Totally Awesome, then a quick swish back in the IPA - I cut off any supports or platforms while the resin is still soft using a hobby knife or clippers. It's MUCH easier than doing it post-cure. - Drop into a tub of water and under a UV light inside a reflective tape-coated box for 10 minutes or so. The object is cured when it doesn't feel tacky. - Wipe off the build plate with with rubbing alcohol - If not printing again soon, filter unused resin from the vat back into a bottle using the included paper filters. Hope you have fun! I've printed everything above and more within the first 4 days of having the printer, and it's been an absolute blast.

Excelente producto

The printer is fantastic, however I'm not too impressed with some of the changes made to Photon Workshop

Der Drucker kam wirklich sehr gut verpackt an, da hat Anycucbic ganze Arbeit geleistet. Der Aufbau ist mit wenigen Handgriffen erledigt und auch das Leveln (Trimmen) der Build Plate funktioniert einfacher als bei Produkten der Konkurrenz. Ich musste nicht nachleveln. Alles ist sehr wertig gearbeitet, die Resinwanne ist aus Metall und hat einen zweiteiligen Rahmen für das Fep Sheet, was das Spannen desselben ungemein erleichtert. Ein Tipp von mir: sollte die Schutzfolie auf dem Bildschirm bei euch blasenfrei aufliegen, entfernt diese nicht, sie fungiert dann als zusätzlicher Schutz vor eventuellen Resinpatzern. Die Druckergebnisse sind besser als ich es gewohnt bin und die Montage der Resinwanne erlaubt einen reibungslosen Arbeitsablauf. Der Monochrome Bildschirm erlaubt kürzere Belichtungszeiten und eine längere Haltbarkeit, außerdem bietet er mit 4K eine sehr hohe Auflösung. Wenn ihr einen Mid Size Resin Drucker erwerben möchtet und das Geld dafür übrig habt empfehle ich diesen.

Ha funcionado excelente, venia muy bien empaquetada y llego en muy buen estado

Súper impresora!..