Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse

This has worked fine so far and is easy to use. I am very impressed at the accuracy of its control unit. My only complaint would be the thermometer due to the fact that it is integrated into the unit so you can not buy replacements in case it gets damaged. Otherwise I am happy and would recommend.

great product. it works just as advertised. a lot of adjustments can be made, and the smartphone app can make all of them remotely, its super convenient. only a few minor things that i believe could be made better. 1. while the device WILL connect to google home and register as a device, google home has litterally no control over it, or ability to tell what the temperature is. since you can just use the inkbird app (or tuya app) this is really a nonissue. just a suggestion really. 2. the increments of time are quite broad. its not possible to have it log the temperature every minute in history, i believe it only logs every 15 minutes. IT DOES REPORT LIVE AND CONSTANTLY, UPDATING IN MERE SECONDS VIA LIVE VIEW IN THE APP, it is constantly updating and providing a realtime temperature in the app however it only logs the temperature and stores it once every 15 minutes. if it could be changed to log temperature every minute as an option that would be useful. again just a suggestion. its not really that helpful for anything, i just like to see everything going on. 3. upon changing any settings on the temperature controller it automaticly assumes that it needs to start either A cooling or B heating if the temperature isnt exactly what the set temperature is at. also sort of a non issue since once it reaches the temperature it reverts to normal operation, meaning the temperature differential, or the setting that adjusts how far from the set temperature it can change before enabling or disabling the cooling or heating system, once temperature is reached after setting a setting in the app or on the controller, works perfectly fine. however if you just want to adjust it so it 1 degree higher in the cooling differential, if you adjust it so it has a 5 degree cooling deviation instead of four, if the temperature is, lets say 78 instead of 75, although its only a 3 degree difference, since you just set the setting it automatically assumes that the temperature needs to be adjusted until it is at the correct temperature before starting operation normally. (just being clear) this is a setting i would want to have an adjustment on. like "restart device upon changing settings? yes or no" then if no is selected, when temperatures are changed if its still within range itll turn off. an example of how this would be useful is if you wanted to adjust the cooling differential higher so the cooling switch turns off, it will ironically turn it on upon making the change, which will immediately have the opposite effect as intended, until it reaches the set temperature, then will use the input settings and resume normal operation. this is the only issue i could see potentially being problematic if you have this placed somewhere with frequent power fluctuations, because when the device restarts it also does just this. checks the temperature and then goes "is it the exact set temperature? no because its off by .1? turn on the heating or cooling." again, just a small pet peeve, not a major issue, but this could be problematic as a UPS battery backup would likely not be able to power any real kind of cooling device and a high power relay of some sort would have to be used to allow power for any high consumption devices to be drawn from elsewhere and the temperature controller to be the only thing drawing power from the ups. that way when the power returns on the temperature sensor never turned off and does not restart. overall i woudl give 4.5 stars if i could because realisticly this is the only product on the market with these features in general, the features being wifi connectivity and the ability to just plug whatever you want into the controller and control both heating and cooling from the same device, as to save power. just my two cents :)

Esta súper fácil de usar, excelentes acabados y materiales, funciona siempre y sin complicaciones ni quejas, es una de esas compras que te enorgullece haber realizado

The Inkbird WiFi ITC‑308 is so good it makes me question every other piece of equipment I own. Setup was stupid easy—like “did I miss a step?” easy. I kept waiting for something to go wrong, but nope. It just… worked. Immediately. Like a loyal golden retriever of temperature controllers. And the control? My keezer is now holding temp so perfectly it’s basically showing off. I open the lid and it’s like the Inkbird whispers, “Relax, buddy. I got this.” I’ve never trusted a gadget more, and I’ve owned things that cost way more and did way less. The WiFi monitoring is the real kicker. I can check the temp from anywhere, which means I now compulsively monitor my beer like it’s a newborn. I’m one step away from knitting it a tiny blanket. If you want a device that makes you feel both incredibly competent and slightly judged by how much better it is at its job than you are, this is the one.

I have used the ITC 308 for years and found it to be extremely reliable, this WiFi version seems to be identical as the original making me think that it will also be reliable. It is extremely easy to set up using the App and the WiFi makes monitoring your beer and adjusting the temperature extremely convenient from your phone. I'm looking forward to continue using this for many brews. Cheers