W702B PRO Motorcycle Carplay Screen for R1200GS R1250GS S1000XR

I have a ‘16 GSA with the factory nav mount. You can just mount the Carpuride onto the factory mount (it clips in with nothing else), but I questioned if it would stay on for rough roads.. An easy solution - almost as if they intended this (but it’s not in the manual that I found and the screws they included were too short).. There are 4 screw holes on the Carpuride that align perfectly at least with my ‘16 GS’ factory holes around the nav. The problem is those BMW screws, even if turned around, are too short AND the wrong thread size. Carpuride came with 4 screws of the right diameter but 1) they won’t fit through the bmw nav holes and 2) they’d be too short. Easy solution: 1) Get 4 new screws of the photographed size (5mmx40mm 0.8 pitch thread). 2) Drill the plastic holes in the 2 OEM GPS mount pieces just a bit larger so the new screws will slide through. This is plastic so easily drilled. On the larger piece drill from the rear as the front has these little inset metal pieces (they’ll come out once drilled). 3) Then assemble again, I’d advise a little blue locktite on the threads since it’s a motorcycle and will vibrate (and that will keep the screws from coming loose). Now it’s both bolted to the bike so it can’t fall off - and it’s also in the GPS cradle and locked with your key. So there’s a little theft deterrence too if someone unscrewed those 4 screws. 4) On my year (‘16) GS I found the bars (brake reservoir) would bump the nav at full lock. To prevent, I simply cut the 2 factory zip ties on the wire to leave more slack, then I could slide the entire mount assembly an inch or two further to the left (and more centered) which allowed clearance on both sides at full lock. Tighten your 4 screws and you’re good to go. And the GPS is great - super easy to use, just sync to your phone in seconds and it’s ready with all the normal CarPlay functionality. I also connected a Cardo headset so I could hear things. Highly recommended!

Absolutely amazing. Older car will not connect to newer phone but the Carpuride adds the ability to have your cell phone projected onto a touch screen. Easy setup! Must have if you have limited upgrade options. Outstanding resolution on the screen.

Tuve antes un producto mas económico pero con la luz exterior no se podia ver nada en la pantalla. Este carpuride podria ser mas claro pero si funciona la lectura tambien bajo sol. Antes tenis problemas de reconexion frecuente con mi celular - siempre se perdia la conexion y volvia. Despues de un Update al firmware mas nuevo esto despareció! Buen soporte por parte de la gente de Carpuride! Me facilitaron el nuevo firmware y las instrucciones del Update. No es tan facil, pero funcionó...

The carpuride w702b is a game changer! I originally got it for my 2019 GS but have now adapted it for use on my 2022 K1600. It is an awesome mirroring device, CarPlay has always been the missing element on BMW motorcycles, but now with this it doesn’t have to be. This product is well enough made to be tough/durable while being inexpensive enough to know that it won’t break the bank if you need to replace it. I highly recommend it. Installation is super easy if you have a bmw nav mount. But even if you don’t it comes with many mounting options.

I have a 2019 R1250RT, which is the generation before the TFT and runs the removable Navigator VI that mounts in the center dash. I bought the BMW-specific 5in Carpuride with the thought of using it in place of the Navigator VI. The Carpuride BMW adapter mount clicks into the dash receptacle and gets power, just like the Navi VI. So as a replacement for the Navi, it works great. But it turns out I like the data displayed on the Navi VI and the ability to control it from the wonder wheel. So I am keeping the Navi VI and instead have mounted the Carpuride on the handlebars with a ball mount. They ship the Carpuride with hardware for a RAM type mount which I used, although the awesome Tackform ball that I already had is 20mm, so you need an adapter. The USB plug inside the right dash cubby won't power the Carpuride but it works great getting power from the 12v power point on the right fairing with a USB-A adapter. The Carpuride is easily visible in sunlight, the image quality is clear, and it connects reliably to my iPhone, even if the phone is in the panniers. The screen responds to gloves and overall, it works no-brainer like the Apple CarPlay in my cars. I thought about the 7in but the 5in is plenty big enough.

I own another Carpuride (W702BS for BMW motorcycle) which mostly works fine. I bought the W103 Pro as a gift for my wife, but it didn't work very well. The problem was with connection stability, both on the Carpuride<->car Bluetooth link, and on the Carpuride<->phone Bluetooth link. The car Bluetooth link fails to connect about 9 times out of 10. Unpairing and recreating the pair works for that drive, but after the car is turned off and then restarted it doesn't work. I ended up trying the internal FM transmitter to the car radio, which works but there's a short blast of static before the transmitter turns on which was startling. The phone Bluetooth link was also poor. My wife reported several times when the phone refused to connect (Apple CarPlay) and several times when the phone would disconnect during drives. The W103 Pro has other issues. At night the screen auto-dims, but it will randomly increase brightness for a few seconds. This happened on a dark rural road and we had to turn off the display for safety. My W702BS has over-the-air (OTA) updates, connect to Wi-Fi to get the latest firmware. The W103 Pro doesn't have OTA. I emailed Carpuride support in early January 2026 and was told there is no updated firmware.

Screen is the perfect size. Ive had a lot of connection issues though. Returned the first one. Second one isnt perfect but good enough ive gotten used to it. Seems to work good if I keep my phone open and let it connect before taking off. If it loses connection mid ride may not reconnect for 3-5 minutes. If they can fix that this thing would be perfect.

En un principio tuve problemas. Cada 10 o 20 minutos se desconectaba la navegación, luego se reconectaba automáticamente. Contacte al soporte de Carpuride explicando el problema, y en menos de 24h me respondieron proveyendo un firmware actualizado que solucionó el inconveniente. Muy contento con el producto.

Ya con un año de uso y funciona bien, de repente se traba y la pantalla no responde bien, pero apagándolo y encendiéndolo se soluciona, también se traba si le da el sol mucho tiempo Pero en general me ha funcionado bien y conectado directo a un relee a la batería

Excelente producto, muy práctico, funcional y se adapta perfecto a mi GS 1200 Lo recomiendo ampliamente

Precio calidad es un muy buen producto, ya recorrido 4000 km con un sol intenso con lluvia y polvo y sigue funcionando al 100%, lo recomiendo ampliamente, tiene muy buena definición y conexión inmediata a lo que le demandes

Working great so far on KTM 890. Feels high quality and the handlebar switch works great. Decided to buy this one instead of a cheaper variant. Handle bar switch allows you to turn it off and many of the cheaper screens cannot be manually turned off. Makes wiring easier.

Es un equipo práctico y fácil de utilizar, de programar, así como su instalación Funciona muy bien el car play