Bumper Scrape Guard for Cars, 6 Pack Front Bumper Scrape Guard Anti-Scratch Universal Fit Black Car Bumper Protector Carbon Fiber Front Lip Splitter Scrape Guard Skid for Lower Sport Cars SUV

Putting the bumper guard was pretty simple and the adhesive was strong.Day 2 after putting this on I heard a loud sound during parking of my car. When I looked under the front bumper, the scraper guard saved the day and there were no scratches on the car body.The adhesive was really good and nothing moved,Overall its a good product.

The media could not be loaded. I've had them for about two months now and the ones I had to bend to line up with the curve of the car have started to come off and will need to be replaced.They seem to be made well but the double sided sticky tape comes off the guard before it comes off the car.

Good quality item to prevent scraping under your front spoiler. The 4 protective strips come with the 3M tape applied. Also included in the box are instructions and a couple of packets of adhesion promoter to ensure that the strips will adhere to the surface. Depending on your application, you might need to purchase 2 kits.

Adhesive doesn't hold as well as it should

I'm sure you've seen the name brand alternative that are quite pricey and although it looked appealing I always am looking for good deals. With that being said, I wanted to protect the front lip of my Mustang and I thought that this might be the ticket as it would rub these instead of my expensive splitter.Some items to consider is if you want to actually cover your front bumper lip with these or space them around the front of your car. My recommendation would be the measure the area you want to cover, decide on how you want the coverage and then order the correct amount of pieces. Remember you only get 2 of these and they are 15.7" long. I know the photo shows three of them but you'll need more. Also, figure out if you just want it on the lip or if you want it on the sides and back. For me the lip is the lowest portion of the car and I wanted to purchase 4 of these for the front.For the installation, one thing you'll need to make sure of is that you clean the button really well. My car is always garaged so I cleaned it well, used some alcohol on it and warmed up the plastic with a heat gun. I'll leave it in the garage 24 hours to let it cure and it's about 80 degrees out during the day so it should stick up nicely. I would recommend not putting them on if it's really cold outside.All in all, this is a nifty product to keep your bumper from getting messed up and it's a very affordable insurance when that bumper stop is a bit higher than you anticipated.

The media could not be loaded. These are amazing! Third car I’ve applied these too! They really save your bumper or splitter, considering mine is Carbon Fiber I don’t want it scratched at all! These work great, highly recommend. Adhesion is great too just make sure you clean the area with alcohol and then use the adhesion promoter provided.

The media could not be loaded. Whether you have a front splitter or just want to protect you front bumper this guards work tremendously. This kit comes with real 3m double sided tape!They’ll surely stay on and protect your vehicle if applied correctly as i’ve installed these in the past.Step 1: Throughly clean bottom of where you choose to apply with alcohol and a clean rag until it’s dirt free.Step 2: wait for alcohol to fully dry then apply Adhesion Promotor. This makes the surface sticky making it almost like if you’re sticking tape to tape (hard to seperate) Let this dry.Step 3: Remove 3m backing tape and use a heat gun, lighter, or hairdryer to heat up the double sided tape till it’s warm (this makes it extra sticky)Step 4: Line up product about 1/4 - 1/2 inches from the edge and slowly tac it down so it holds its curvature. TAKE YOUR TIME with this step because using this application method makes it grab on so we’ll to the point that if you try removing it, you’ll ruin the 3m tape making it unusable.Step 5: Go over and ensure that the strips are pressed firmly onto your application service. While this fully cures try to avoid contact for ~24-48 hours for the best result(P.S. If you read this far go ahead and trust me with this over the other brand since it’s less than 1/2 the cost and it’s the exact same material)

The front end of my Lexus CT is quite low, you have to very careful even doing simple things such as pulling into my driveway or you will scrape the front end...that noise it makes is your instant notification.These were easy to install. After doing a normal car wash, I cleaned the area where these were going to be installed with alcohol. It was easy to determine the best place to mount them. Unfortunately just look for the scrapes. I did use 3M Adhesion Promoter since I had some on hand.After these are installed, they are not visible. I did slightly go over a parking curb and it scraped these guards slightly without doing and additional damage to the car. They worked as designed.They are staying in place well, but I am concerned at some point the combination of occasionally bumping/scraping them with their exposure to water on the streets will cause the adhesive to fail. Should that happen I will buy additional 3M tape and reinstall them.If your car has a low front end these are an inexpensive way to protect it.