ROMEO5 GEN I & GEN II 1x20mm 2 MOA Dot Sight

I received this in the factory sealed box, and with the factory tamper proof seal in tact! The sight came boxed with the, Mounting key, Lens cloth, Battery, 2 mounts, lens cap, Instruction Sheet. This is a very nice sight, easy to mount, clear optics. Clearing up the misinformation about this sight. A few things that's important to know about the optic! (1) Read over the instruction sheet, don't just think you've had these types of sights before and you know how this one works and end up leaving bad reviews. (2) Yes! the sight has an auto off after 120 seconds of "No Motion" and auto motion ON so, yes if it stored in a vehicle the motion of it will keep the red dot illuminated and cause an unnecessary battery drain. If you've read the instruction sheet it informs you that the sight also an actual Power Off and Power On option, to use this option you only have to hold down on either the + or - button longer than 1 second, and the same thing to power it back on. (3) reports of the sight not working in MOST cases is caused from one of couple of things, when you first install the battery you will not be able to see the red dot until you turn up the brightness, so click the + button (Don't Hold It Down At First, Just Click It) 3 or 4 times if you still don't see the dot assume the sight is in its Powered Off Mode and push and hold either the + or the - button for 1-Second to actually turn the sight on, then click the + (plus) button a few times until the dot becomes bright enough to see. (4) Another possible problem that could happen is with installing the battery, mine had a safety peel off sticker that HAS to be removed, well due to certain conditions when you peel these off it leaves adhesive (glue) on the battery so its possible to leave enough as to cause a loss of battery contact. Make sure when you peel the sticker off from the battery that all the adhesive is cleaned off of the battery itself. _______________________________________________________________________ !Caution! the brightness adjustments in either direction ISN'T A PUSH & HOLD operation!!!!! its momentary CLICKS! That means that the brightness setting isn't a constant veritable, its in CLICKED STEPS! !Caution! holding down for more than one second on either the Plus or the Minus button actually turns the optic sight OFF (totally powering it down) meaning that just clicking the brightness buttons (Plus or Minus) will not do anything until the optic sight is "Turned Back On" Bottom line on the misinformation of this optic, its has some higher level electronics then the standard red dots, its not rocket science to understand, but its cause for a lot of these being returned and the reason for a lot of the low rated reviews. Its NOT only "Auto Powered Controlled" it can be Turned Off, and it can be done so by accident. PLEASE read over the instruction sheet FIRST before you box this sight up and return it, its quality enough to deserve that much attention. Bottom line on the optic sight itself. Let me make this clear! This review is from a 64 year old AR-15 (5.56 NATO) gun owner!! The sight responded well to adjustments! Seems to be holding ZERO very well with what ammo I've fired so far! It has very clear optics! Having the turret adjusting bits built onto the turret caps works very well! There is no issues with the quality or function of this sight that I can find, but I'm thinking that the same sight upgraded to the larger tube and lenses might be NICE! but it would be larger and it cost more! Very Nice for the money!

Dot brightness very good. Easy to mount. (2) available pic rail mounts are included for height preference. Easy to zero. Comes with battery, mounting/adjustment tool, lens cloth and bikini-style lens cover. This version looks better than the newer models (in my opinion). Generally a great red dot. I'll get another one soon.

Very nice for the money

I put it on a s&w response. It works very well

Lite weight Decent quality Pricey for what you get

I finally got this out to the range today to give it a good try. First, this was extremely easy to install. It took a minute or so to attach to my picatinny rail. Now all I have to do is add a little blue loctite and this isn't going anywhere. Out of the box it was already fairly accurate. I used the iron sights to get a rough idea. For a red dot on an AR-15 fifty yards is about the longest distance to sight this in. Any longer and the dot takes up a large part of the target. Along these lines, this dot is much smaller than the one I have on another AR. It can be made to be bigger but having a more accurate dot is a major plus. At 50 yards I was a little low and left but made a quick adjustment. It was fairly accurate. Again, this is not designed to be a long distance target scope. It is dialed in from inside 50 and I have confidence. The dot will go off after a few minutes which really helps the battery. All that is great. The only reason I dropped this to a 4 star is I really do not like the bikini cover. It wants to slip off and the covers do not snap on well. If the connecting rubber breaks I'm a little worried the glass will be unprotected. If they fixed this issue on a redesign this would be a 5/5 for sure. It is a good quality red dot at a good price.

The SIG SAUER Romeo5 1X20mm Red Dot Sight has exceeded my expectations. The red dot is crisp, clear, and easy to pick up quickly, which makes target acquisition fast and effortless. The brightness settings are easy to adjust and work well in both bright daylight and low-light conditions. The build quality feels extremely durable. It’s solid, waterproof, and fogproof, so it holds up well in different environments without any issues. The included Picatinny mount made installation simple, and once mounted, it stays secure with no movement. Battery life has been excellent, and the motion-activated feature is a great bonus. It turns on when needed and helps conserve power. Overall, this is a dependable, high-quality optic that performs exactly as advertised. Definitely worth it.

I own 4 Holosun dot sights and two Aimpoints. The Holosun units are a great alternative to Aimpoint, and typically come in a little under $200. The Aimpoints are significantly more expensive. Generally speaking, the Aimpoints are a tad bit clearer and the dot is a bit sharper, but I can buy two Holosun units for the price of the cheapest Aimpoint. Then I come across this Sig Romeo for a tad over $100. Looks cool, has the long battery life like the others I mentioned, so I grabbed one. Turns out, this sight is incredible for the money. It’s on par with the newer Holosuns in terms of glass clarity and very close to Aimpoint clarity. No tint to the glass, dot is crisp, etc. Comparing all the parts/finshes, the packaging and everything else, I have a strong feeling these sights are manufactured by Holosun to Sig’s specifications...which is a good thing, in my opinion. To get anything even a little bit better than this Sig Romeo5 site, I would have to buy an Aimpoint at roughly four times the cost...and ultimately I would end up with a sight that I’d guess is only 10-15% better in terms of clarity. For my money, I just can’t see the benefit of spending $450+ on a non magnified optic, when I get 85-90% of the performance for 1/4 the cost. As far as other $100~ red dots go, I’ve tried a number of them over the years and not one of them was good enough to keep. The Vortex Sparc is one of them that’s popular, but I thought it was total garbage (short battery life, tinted glass, cheap looking finish, slightly fuzzy dot) and I paid $199 for it. Anyways - for my money, it’s going to be Holosun or Sig Sauer Romeo Red Dots from now on. Aimpoint makes a great sight and I enjoy the two I own, but with Holosun and Sig as tried and true, proven alternatives, I can’t justify the added cost any longer.

This sight was easy to install and use. It is great value as I've compared with holosun and others. Prior to order, I was concerned with brightness of the red dot but that was pointless. It's way too bright to stay on highest seeting. The adjustment of the dot is super easy and the build quality feels solid. The fit and form of this sight looks so got on my kit. Functionality is great and fit is tight!

OK

Got this for my .22 rifle. Worked perfectly and is completely reliable. Minimal controls and auto on/off are make it easy to use. Holds zero, haven't had to touch it after initial adjustments. Rugged, it took a few handling bangs without problems. I would highly recommend this series of sights. Rubber dcope caps are a bit fiddly, but not a big deal.

Super Teil

Jetzt muss es noch eingestellt werden!!! 😉