VEVOR Mophorn Hydraulic Power Unit Hydraulic Pump Car Lift, Hydraulic Pack Dump Trailer Pump (4L-Metal-Double Acting)

The performance is amazing, makes my job so much easier! We installed this in our single car trailer and does the work itself! I Highly recommend this product! I’ll post pictures soon !

I purchsaed this pump for a 12 foot tilt trailer that had a valve on the ram going port to port a manual setup. I read a lot of reviews and I was worried about a lot of people having problems with trying to find some non standard British fittings. It came in the box with 4 fittings. I removed the ones in the pump replaced them with the other provided. I made two hoses up for exact fit. Everything I used was power steering ram fittings. Welded a piece of flat bar 2"x3/8 8" long to the frame for mounting. I bolted the pre threaded pump block with M10-1.5x35MM to the welded flat bar. The the port coming out of the relay valve with the red knob on it is the pump (up) button and the other side of the block is the the (down). I adjusted the pump so it would not over pressure up or down, so it would bypass at a reasonable pressure. It lifted 2800Lbs with ease. The unit was properly prewired. All of the electrical stud contacts had to be torqued. Be carful the isolated relay contactor is a cheaper one but sufficient for the load. I Used two number 2 wire with no voltage drop at 3' long. Pump is fast. I installed some baffles on the hoses at A-B outputs to tame it down little. I dont think the solenoid and relays are water proof. If this thing will be exposed to weather I would build a cover over the pump electronics. I have only ran it 30-40 times to soon to tell if it will last. Good design well made product for the money. Unit came packaged good.

Poor quality. Spent 2 hrs installing in a difficult location on a tilt deck trailer. . It work correctly a total of 2 times in one week the became locked in one direction. Should have spent extra $100 and purchased a USA made product.

Good pump !!!!

I haven't finished installing this pump yet, but I wanted to leave a review to note something that has caused a delay and extra expense for me.I ordered #6 SAE fittings because that's what's described in the listing and in the instruction manual available online. However, the pump I received does NOT have SAE #6 sized ports.As far as I can tell, the female ports on the pump are SAE/ORB #5 (1/2"-20 thread) and it comes with two set of fittings ... SAE #5 Male to 3/8" JIC Male and SAE #5 Male to 3/8" NPT Male. The fittings I ordered with the pump based on the listing didn't work, so I'm waiting on a new order of SAE #5 (hard to find) fittings before I can finish the install.3 stars for now, I will update this review and the rating when I'm able to install it.