Aoxun 8'x6' Shed with Floor Galvanized Steel Outdoor Storage Shed Brown

I'm very happy with this shed. I'm a 63 year old woman and I was able to put this together myself with my 82 year old mother helping hold up panels on occasion and retrieve the occasional screw I dropped. First I built a foundation with pressure treated wood and set it on some concrete pavers to give it some airflow around the wood. Then I sorted all of the shed parts and started the assembly. I did not peel off the plastic coating on the pieces. I figured I'd get it assembled and if our summer heat released the plastic, I'd take care of it then. So far the plastic wrap still hasn't come loose and the shed still looks good. Mostly the instructions were good even though they are pictures only. There were a couple of places that could have used better explanations but got it figured out. Nothing major. All of the parts lined up well. Keep in mind, because this is a thin formed metal it flexes so the holes might seem slightly off until the part is seated properly. But if the holes didn't line up at all, I checked to see if I was adding the part in the wrong position and that was usually the case. There was one or two locations where the holes were actually little off, but I was using an electric screw driver (HIGHLY recommended for this project) and let the sheet metal screws push through. I did order the floor kit. The kit is basically just corrugated plastic panels so that might matter to you depending on what you are storing. It makes for a nice finish and was a good addition for our needs. Because there is a small gap around the doors and I knew we would be watering the lawn around the shed, I added car door seal stripping to the door edge. to keep the water out and that has worked great. We have very hot summers and I wanted something that I thought would stay on. So far it's working. We've had a few rainstorms and I checked the shed after each one and there hasn't been any water inside so it doesn't leak. If we had more extreme weather I would have probably gone with a stronger wood shed but this one is strong enough and works perfectly for my needs. It's also much more budget friendly. The latch could probably be better but it works and it keeps the door closed. One other note - it's actually gray and black. I bought it because it said brown and looked brown and tan in the photos but it's definitely not brown. Regardless of the color, I'm still happy I chose this shed.

Great size shed for my needs. It does take two people to construct at times.

We needed a shed that fit in an extremely specific space and found that this shed was a perfect fit (almost). To start - It's hard to prepare a head of time for a base when you have conflicting dimensions. We had to wait for the shed to be delivered in order to properly measure for the base. Removing protective coating- Many review complained about removing the protection from every single piece. I didn't find it that difficult. What worked for us was having all the pieces flat on a table, starting from one end and pulling hard and at a 45° angle. Most pieces only less then a minute each. Assembly - Not including the base, it took 2 adults 4 hours to put the shed together (and that includes some modifications). The instructions could be clearer, yes; but it was not difficult nor complex. Mostly one person held things while the other screwed things together. Quality - The package was pretty heavy - but each individual panel is very light. Once all together, it seems very sturdy. And once attached to a base (and we attached it to our home). I'm not concerned about longevity. Question Marks - For the 3 x 5 shed. We built a base that was 56" x 31". But note that there is an overhang on each side and front and back. We had to modify the roof panels (cut and drill holes) in order for the back to be flat and able to be attached to our home. Also, through one rain storm there is water that gets in, not a lot, and not sure how exactly but the corners had some moisture. Notes- The door can be flipped in either direction, but the latch will be lower if you install it the opposite as it was intended. Also a few of our panels had a small hole it them. We didn't really care but you should inspect everything before installing. Overall for just over $110 - and another $40 for the base (1/2" exterior plywood and 4x4s) - were very happy with the shed and expect it to last a long time.

Let me first say that I purchased the same 6x8 shed about 5 years ago, and this newer model is SOOO much better than the first. To start, the instructions are easier to read, and unlike the previous one, ALL the holes lined up with these instructions. That wasn't the case on the first. If you see any photos of something not fitting correctly, I would say that's user install errors. A little tug or pull to line up holes is all that was needed. Strength! Yes, this one is much better put together because the overlapping sheets of metal have a nut and bolt in the center of the overlap, whereas the first one did not. This adds a lot of strength to the exterior. And once everything was put together, it felt much better built than the old one. Lock and key! Again, new and improved now has a lock and key while the previous one had a simple latch. Water proofing. While I did spray water on the roof to make sure I had no leaks, on this one I will follow what I did previously, and that's to go get a waterproof sealant from the local hardware store and put some on every screw on the roof. This worked like magic previously, since some of those holes didn't line up. Grab yourself some sealant and just cover each roof screw and you'll never need to worry about it. To add more strength as a whole, I screwed on pressure treated 2x4s underneath the metal frame and then plywood inside was screwed into the 2x4s. Mine sits directly on our cement outside, so your setup may need a different build.

I decided to get this to have better storage for my yard tools, after much searching I decided to get this one. One of the features I liked was it came with a floor while most others didn’t . The box arrived with some minor damage. upon opening and taking the parts out I noticed quite a bit of damage on many of the panels, lots of noticable dents. as we began putting this together they became more prevalent. The roof had some gaps and where the roof met the verticle walls their were also gaps. We had to drill quite a fer holes as things failed to line up with the factory holes. I had several issues that required me to contact customer support, firstly the phone number that was listed was useless. I ended up contacting them through Amazon, after that they were quite responsive. after a few back and fourth attempts at resolution I decided that due to the many issues I was not going to keep this. So after two people spending over 6 hours assimbling this and 1 1/2 hours disambling I returned the shed. All in all this was a complete waste of time and energy. I had alot of photos to post however after writing my first review I deleted the photos but for some reason Amazon didnt like my review and rejected it, so this is review number two. the main thing you should take away from this is the product is light weight metal that dents and bends easily and you have a higher than 50% chance youll experience what I did. Im now going to get one of the composite models that wont have these issues. So buyer beware....

I purchased the 6 x 3.9 ft shed it is quite a challenge to put together. The base is simple and straight forward but the shed itself is challenging. Here are the reasons: 1) The instructions are not clear and not enough details are provided to ensure the pieces are arranged correctly. Specifically when you get to the rectangular metal support that the top of the side panels screw into, look at where the pieces should screw into the metal because the instructions can be confusing. 2) For the roof where the hole is 6 feet off the ground, putting a size 8 screw across 3 layers of metal where the holes do not line up correctly and you have to find a 1/2 cm diameter hole on the bottom layer to screw into is very difficult. The easier way is if the manufacturer used a nut/bolt system but it's just 1 small screw into a 1/2 cm diameter hole in the metal. The metal itself is also very thin and you will certainly scratch the paint/protective layer while you assemble it. However it is cheap and the pieces are light. Update: So my toddler accidentally kicked a panel and it crumpled. Now I have a hole on the side of the shed. Furthermore, as I mentioned above the metal is thin. The metal is also sharp. What is sharp and thin . . . a knife. Guess what happened when I accidentally hit my foot on the side of a panel.

I was rather skeptical at first about whether or not I wanted to buy this shed. There are mixed reviews, some saying that the holes didn't align and the parts were dented. Some of my panels were indeed dented, but that's what you can expect for a full metal shed at this price. This is very thin gauge material so it will bend and it doesn't take much to dent. But my overall experience with this shed was very good. The first piece I put together the holes were not lining up. I was about to do what some others had suggested and drill my own pilot holes. But then I took another look at the detailed instructions and realized the holes did not line up because of my mistake. I had flipped one of the pieces on the base. After that, I was much more careful to make sure I had the correct pieces that I was trying to install and all the holes aligned. The entire process took me less than five hours and now I have a very nice looking shed. You can go spend a lot more money buying something that is already put together or is made of a sturdier material. But I am quite satisfied with what I have in this product.

I give it a 5 star but there were minor issues. First, the unit is about 8" short on length and width from 8x6. I built a raised wood foundation 8x6 but I was able to work around it (see pics). The build was completed with 6 hours but I had 2 extra hands for some of it which helped a lot, plus I have a construction background and was able to stand all walls quickly (1 hour). It looks good and feels sturdy and stable. The only real negative is the roof cap at the peek seems not to sit right but after strong rains last weekend it did not leak so aesthetic issue only. The second day I installed the doors in an hour approx. I would recommend this unit. I wish it had a window but not a major for me. I was able to fit everything from a temp tent unit and other items from the garage.

I used this on my deck to hold my garbage/ recycling to keep rodents out. There's no bottom with it which works perfectly on my deck to still let air circulation. Comes in a lot of pieces, took one person a few hours to put together

Très bien fait, les trous sont percés avec une précision impressionnante mais il y a une pellicule de plastique sur tout les morceaux et c’est très long et fatigant à décoller dans tout les plis et recoin , les visses se strippes facilement, il ne faut pas utiliser de visseuse ou l’ajuster très faible, mais pour le prix personne ne peut faire une remise aussi bien faite et élégante 👍

Perfect chicken coop

perfect shed for a small space

I ordered the 5ft by 3ft shed as it looked a perfect fit for a bike shed to go at the side of the house instead of storing them in a heavily cluttered main wooden shed. Based on the dimensions advertised on the pictures advertising of 5ft 09 & 2ft 99, it looked great. The shed was straightforward enough to put together in a couple of hours for 2 competent people with some common sense, as some of the pictures/instructions require you to use your intuition. However, immediately from the instruction book it states it is quite a bit smaller, half a foot less long and a wide... which once constructed holds true. As a result it now does not fit adult sized bikes in it like it should and so will have to rearrange to fit other stuff in instead. In summary, good shed at good price but do not be misled in the size by the pictures and title. It is not a 5ft x 3ft shed. It is 4.6ft by 2.5ft.