🔨 Stick with the Best: Your Projects Deserve Liquid Nails!
The Liquid Nails LQN49277 Polyurethane Construction Adhesive is a 10 oz cartridge designed for superior bonding strength. With an all-weather formula, it is ideal for both indoor and outdoor use, providing four times the durability of standard adhesives. Manufactured in China, this adhesive is a must-have for any serious DIY enthusiast or professional contractor.
J**F
This product WORKS (for both indoor AND outdoor projects).
I had Liquid Nails LN950 referred to me for a small project around the house by both of my parents. My mother is a Mosaic artist who uses this product all the time for small and medium weight applications of tile on wood and tile on cement. My father uses this when working to install a variety of materials on to concrete surfaces, and has used it for wooden furniture fixes as well. This product will work with an almost endless list of materials: wood, plastic, rubber, tile, mosaics, concrete, ceramics, clay, metal, marble, granite, etc. There are an innumerable amount of projects that can be handled with this product. It is truly an amazing adhesive, and an excellent replacement for situations where nails can not be used.For my specific project i needed to install lightweight colored glass shapes to a brick wall in my outdoor patio space. This was strictly an aesthetic design project to spruce up the area and add a unique touch. I couldn't nail or screw the glass in to the wall for obvious reasons, but wanted the shapes to sit flush against the wall. I used a caulking gun for this process and it couldn't have been easier! The product was very easily applied to the back of the shapes, and came out of the tube very evenly when working. I chose a day that wasn't too humid and worked in the early evening. After applying each shape to the wall i leaned wood against it to create pressure, and allowed it to dry over night. I used the entire 10 oz tube for this project and clean up was a breeze. There was no funky smell or after smell like some adhesives.After about 24 hrs. i tested the glass shapes and they wouldn't budge. I don't think i could remove them in the future if i tried. It is rated for all weather situations and so far heavy rain and 95* heat haven't affected it one bit. It does the job right. If you're looking for a nail replacement, or simply just a strong adhesive that isn't messy and is easy to use, buy this product! I will undoubhtedly be purchasing this for similar project needs in the future.
C**.
Time will tell
I gave 4 stars because of the effort required to using a handheld caulking gun was extremely demanding. It was like trying to suck peanut butter through a straw. I’d recommend an electric caulking gun for anyone trying to use the entire tube in one sitting.I used this to secure a garage door threshold seal that adheres to the concrete floor. I chose it based upon reviews that claimed it stands up to moisture the best. I cleaned the concrete surface with soap and water and then let it dry. Next I scrubbed the clean surface with alcohol to remove any residue and let it dry. Next I used a caulking gun and made a wave pattern over the 18 foot span then placed the threshold seal in place. Finally I closed the garage door on the seal to ensure it had adequate pressure while the adhesive dried. So far so good. It has been about 90 days and the seal it doing its job and has not pealed up in any area.
J**J
Bonding Rubber Parking Block to Concrete Garage Floor
I used this tube of Liquid Nails LN950 Polyurethane adhesive to bond aheavy rubber parking block (also known as a curb stop, a parking stop,or a wheel stop)... to the concrete floor of my parking spot in my condo'sparking garage, to prevent the front of our car from being able to touchthe concrete block wall at the front of our parking spot.After prepping the concrete floor by pouring water and Windex onto theconcrete, and scrubbing it with a scrub brush, and rinsing it clean, andallowing it 24 hours to dry... and prepping the rubber parking block byspraying a solvent onto the side that would be bonded to the concrete,and then rinsing it with water... we were ready to use the Liquid Nails.I put down a thick bead of LN950 on the bottom of the rubber parking block,and placed it on the cleaned area of the concrete garage floor. About24 hours later I checked to see if I just pry it off the concrete, and I could not.This appears to be an excellent product for bonding heavy rubber to concrete.
J**.
Review not for item but Amazon Customer Return
This is my first review and I feel like this is the first time that amazon had me upset.I'm sure the product it self is great and that's why I bought it after research. The items I received on 6/11/2014 had a expiration date of 12/19/13. Pretty much 6 months past expired. I know it was probably fine to use but I didn't want to risk it not doing as it was supposed to do as the chemical bonding could have changed. That's why there is a expiration date on an adhesive, which I assume is rare.Anyways they weren't going to process my return as they said it was hazardous material and that all hazardous material is non returnable. I was able to get a refund as they items were sold to me past expiration date but now I have to dispose of them, according to the girl, instead of send them back.Now I'm stuck debating if I can toss this stuff in the garbage or of it needs to be disposed of properly at a hazardous waste drop off.I would buy from a retail outlet if possible. I know HD and Lows don't really stock it so you might need to go to a more specialty type construction/home improvement place.
A**R
After buying this product I realized how easy any indoor projects can be
After buying this product I realized how easy any indoor projects can be! The most pleasant part that this product can be used for any material you wish to bond together. In my particular case, I had a transition panel between my kitchen area and my living room which needed to be glued or nailed, so I used liquiid nails to glue it to the floor.Here I need to notice that it takes definitely some time for the product to work completely, it dries out pretty quickly but for durable and better results I recommend to leave it for about 24 hours or overnight to be completely sure that it is worked. ( I also placed some heavy blocks on top to create extra pressure, which is not absolutely necessary)Afterward, I also used it for the wood panel to glue to the wall, which worked out splendid too.This product is definitely worth its money.
Trustpilot
2 days ago
4 days ago