Fanttik T1 Max Cordless Soldering Iron, 7 Sec Fast Heating 200°C to 450°C, 4 C210 Tips, 360° Stand, Smart Sleep, Electronics Assembly, Repair

As a woman I'm new to soldering. I have a few diy projects to knock out and just kept fumbling around with corded solders at my disposal. They are big compared to my fem hands plus the cordage is annoying I was constantly worried one of my dogs would catch the cord right as i used the solderer. I turned to Amazon to see if there were and cordless solderers out there worth a flip and came across this one. Only down sided are I wish it came with the paste and a little bit of the soldering metal/ string (dunno what its called but the stuff you use to melt things together). This was a gift to myself and i sure am happy i got it. There are so many different ways it can be used so for me its a handy multi purpose tool. I can etch images on a piece of leather, canvas or wood. I like making moccasins and will be adding designs using this soldering tool. I received it in great time, packaging was professional and intact. No missing items or damage to the product. The black box was sealed in clear plastic so no doubt it was new. Putting it together was a cinch. However, i was not very forceful when putting the tips in because i have a habit of damaging delicate items and i saw this tool as delicate. Well I learned there is a certain amount of force needed to properly place the tip in the tool and about three clicks that sound as an indication its seated correctly. First time placing the tip i tried turning it on and it just wouldn't stay on. I thought it was faulty as i had expected but I WAS WRONG. LOL i didn't have the tip seated in the tool properly and thank goodness it doesn't heat the tip if its not seated properly. I have two dogs and if the tip was hot one or both of my dogs would have been burned by a tip falling on to the floor a couple times. I watched a couple videos and learned i was not forceful enough in pushing the tips in and i surely didn't hear any clicking happening. The videos helped, I re-seated the tip, heard a few clicks and couldn't pull the tip out after screwing the tip back in and the tool finally stayed on because i seated the tip the way it was supposed to be. After about 3 seconds like a dodo i touched the tip and holy cow, HOT! It wasn't ready yet but holy cow it gets hot fast. THIS IS NOT A TOY! SO BE CAREFUL ... the solderer works and melts as its supposed to. It also etches designs on canvas, leather and wooden frames. I've always dreaded soldering things until I tried the Fanttik T1 Max!! I wish I had more projects lined up just to have an excuse to use this tool. Quality Product, packaging and the Battery lasts. No issues with charging via USB C or with power for the duration of use. Best tool I've bought in several years. I recomend and would buy again...if i break it. LOL

It is really awesome and I love using it. In comparison with my old, corded soldering iron I have noted this product is well researched and developed model. I want to highlight couple of advantages. 1. It has USB C charging battery is the technology of the day. 2. Having charged the battery holds heating power for sufficient time and does the job. Also, no corded wire hanging around the soldering gun being in use. 3. The various heating temperatures selection is really helpful for soldering, desoldering, etc. This is an essential requirement to control heat level as per demand. 4. The interchangeable soldering tips are added advantage to meet the requirement with better precision. 5. The auto sleep function of the soldering iron when not in use is really appreciated. This saves the battery a lot. 6. The aesthetic look of the base and the 360-degree swilling arm holder to hold the heated soldering iron firmly in place is really an innovative design. 7. the small provision at the base itself to hold the cleaning sponge is a well thought one. 8. The additional soldering tips tray holder at the bottom the base serves the very purpose when they are in need. No need to search here and there. I will recommend this product for every enthusiastic person; however expensive it may be.

Vraiment génial.! La boite sous blister inspire tout de suite confiance et une fois le film plastique retiré et la boite principale ouverte on est tout a fait sûr que ce produit est de grande qualité.On se retrouve un peu comme quand on achète un produit "APPLE"au de gamme.Sous la notice(en Français)s'offre a votre vue 3 boites plus petites parfaitement imbriqués ensemble avec un symbole sûr chacune d'elle.Sûr la plus grande ,la potence tournante,et sûr les deux autres,de taille presque identique,respectivement le symbole de la pompe a dessouder et le fameux fer a souder.Ouvrons maintenant la plus grande;On tombe sur un joli petit sac en feutrine ,permettant de ranger le fer une fois utilisé,ou les autres accessoires a votre discrétion et le câble de recharge très bien embalé.En dessous il y a un sachet en plastique opaque dans lequel il y a la potence pour le fer a souder et aussi(attention de ne pas les perdre)les petits embouts pour la pompe a dessouder et les petites éponges de nettoyage.La potence en aluminium brossé Anthracite est superbe. Dans la deuxième boite la pompe a dessouder est de grande qualité et la succion vraiment bonne(elle aussi est lourde et de la même couleur). Ouvrons la troisième boite et nous trouvons maintenant le fer a souder électronique ....Une merveille de technologie,racé,léger et lourd a la fois,juste ce qu'il faut et là a cet instant précis vous êtes sûr que vous allez pouvoir réaliser de bons travaux avec cette merveille.Mais ce n'est pas tout,en dessous des 3 boites il y en a une quatrième qui occupe tout le fond;c'est le socle lui aussi très bien protégé et très beau et stable.Dans le socle il y a un petit tiroir dans lequel vous trouverez les différentes panes nécessaires au divers travaux a effectuer.Ces accessoires sont étrangement longs et lisez bien la notice pour bien les insérer dans le fer.Il faut vraiment les faire grandement pénétrer dans le fer mais sans rien abîmer.Vous êtes maintenant prêt a démarrer.Vous réglez la température a l'aide de la mollette située a l'arrière de l'appareil et appuyez 3 secondes sur le bouton pressoir de mise en route et la première chose surprenante qui se produit c'est l'éclairage d'un puissant halo lumineux a l'avant qui permet une bonne visibilité du champ de travail.ATTENTION.!!! car le fer chauffe extrêmement vite,alors ne soyez pas tenté de toucher avec les doigts.!!!!! Et pour chauffer ça chauffe...Matériel de très grande qualité répondant a toutes mes attentes..Je recommande absolument..PS:j'ai oublié de mentionner la présence d'une petite pince,belle et bonne elle aussi,qui vous sera certainement très utile...... Pour le reste a vous de le découvrir..Christian.

Absolutely excellent soldering iron. Battery lasts longer than a whole evenings work. I’ve used it continuously for 5-6 hours. Gets to temperature quickly and stays at it. Stand by mode also works well, hardly any delay while it gets back to heat. No wires or gas to worry about, easy to use, and at a great price. Perfect.

Sorprendidísimo para bien. Se percibe calidad, carga por USB (viene el cable, no el cargador) y junto con la estación de soldadura, los soldadores de gas y este, ya cubro todas las circunstancias. Me ha gustado mucho. Funciona muy bien. Repetiría compra