








Desertcart purchases this item on your behalf and handles shipping, customs, and support to Tunisia.
🔒 Seal the deal on perfect prints — your filament’s new best friend!
The Polymaker PolyDryer Dry Box is a dedicated filament storage solution designed to maintain optimal humidity for up to 30 days. With airtight sealing and high-quality visible desiccants, it safely stores up to 1kg of filament, ensuring your 3D printing materials stay dry and ready. Available in clear or black, this durable plastic box is a must-have for professionals seeking reliable filament preservation without the DIY fuss.
| ASIN | B0CK17RTP4 |
| Amazon 売れ筋ランキング | 産業・研究開発用品 - 35,978位 ( 産業・研究開発用品の売れ筋ランキングを見る ) 3Dプリンタアクセサリ - 214位 |
| GTIN (Global Trade Identification Number) | 06938936714262 |
| おすすめ度 | 5つ星のうち4.5 692 レビュー |
| カラー | クリア、黒 |
| パック数 | 1 |
| ブランド | ポリメーカー(Polymaker) |
| ブランド名 | ポリメーカー(Polymaker) |
| メーカー名 | サンステラ(Sunstella) |
| メーカー型番 | PX01003 |
| ユニット数 | 1.0 個 |
| 保証内容 | 初期不良交換 |
| 商品の入り数 | 1 |
| 商品の重量 | 0.7 キログラム |
| 商品直径 | 1.75 ミリメートル |
| 型番 | PX01003 |
| 材質 | プラスチック |
| 特徴 | 専用収納ボックス、高い密閉性、高品質乾燥剤、最長30日間の最適湿度維持 |
| 特殊機能 | 専用収納ボックス、高い密閉性、高品質乾燥剤、最長30日間の最適湿度維持 |
| 直径 | 1.75 ミリメートル |
| 素材 | プラスチック |
| 色 | クリア、黒 |
か**ん
自作の方が安いが…
蓋が硬い、スプールの軸がいまいちくらいの不満点はあるが、自作する手間が無くなるのが大きかったので2個目を購入した。 ただ、これの改造品を何個かプリントしているが…
家**い
密閉良好です。
乾燥剤を入れて使っています。密閉はとても良好で追加で乾燥剤を入れると10%近くまでいきます。
S**E
乾燥機とセットで買うと便利です。
乾燥機とのセットを持っているので買い足しです。 以前は自作のフィラメントケースを使っていたのですが、PCやTPUを使うようになったので乾燥させないとどうしても…… 何が良いって普通はただのケースとして使っていて、乾燥させたい時だけ下に乾燥機をつけれる事。
M**Y
よくできています
PLAフィラメントの保管用に購入 乾燥機は不要と考え、乾燥剤のみで使用していますが 夏場でも湿度は抑えられていて満足です 付属のPTFEチューブが太いのでケースのブッシュと共に 4㎜径のチューブに対応していれば尚よかったかも
カ**メ
蓋が硬すぎる。堅牢すぎ。The lid is too tight.
COMESOONのフィラメントケース(約2000円)との比較になります。蓋がめちゃくちゃ硬いです。蓋を開閉した後に3dデータを弄らないといけない時に指先に力が入らないので。そのくらい固いです。 一応、蓋を押しながらやると開くはあきます。油を塗ってみて多少マシになりましたが硬いのは嫌ですね。 容器は厚くてしっかりしていますが、厚すぎて全体的に重い感じ(スタックするために厚いのかも)。 フィラメントケースの中央の穴に通す軸がありますが、これがハマりにくい。トイレットペーパーの芯をホルダーに入れる時にスムーズに入らないみたいな感じになってケースに上手く入らないです。1キロあるフィラメントを指で支えながら芯を入れ込むのは指が疲れます。なぜあと0.5mm芯を短くしなかったのか。通せばスムーズに回転しますが、通さなくても下にベアリングがあるので芯をつけなくても置くだけで問題ないみたいです。だったら下のだけでいいのでは?このベアリングは鉄のベアリングですが、回転のスムーズさは安いケースのプラベアリングと変わらないです。 頑丈なんですが安いケースに比べてフィラメント入れるだけなのに時間がかかり疲れました。ケースの、物体としてのよさを追求して、使い勝手を忘れてしまった悲しい置物です。とりあえず買うには安いケースが絶対良いです。 唯一良かったのはケース下の滑り止めで、良質なゴムで全く滑らないです。
A**C
良いです
自作されてる方も多いようですが、部品を集めるとそこそこの値段になってしまいますが、 これは完成していますし、そんなに高価でもありません。 良い商品だと思います。 冬は湿気の多い東北地方ですが、ないぶの湿度はいつも10%に保たれていて申し分ありません。
H**I
Disappointed
The photo shows that the moisture content should be 10-15% inside, but this is not the case in Japan, because the moisture content did not fall below 38%. The carp is also not very airtight, because sometimes the moisture rises if it is very high outside. It's also very strange to sell the box separately from the device, but not the device separately.
L**2
Need the dryer for this to function fully
You do need to already have the accompanying dryer but if you already do you can use these for storage
A**R
Fait ce que ça doit faire
Très bien mais un peu trop cher
C**R
This ecosystem is a brilliant investment.
The PolyDryer system is a total game-changer for anyone tired of the constant battle against filament humidity. The standout feature is undoubtedly the modular design; unlike traditional dryers that pull double duty as a single-spool feeder, this system allows you to decouple the drying unit from the storage containers. Being able to purchase additional sealed storage boxes means you can dry a roll, snap the airtight seals shut, and move on to the next one without leaving your filament exposed to the air. It’s an incredibly efficient workflow for those of us with growing "filament graveyards" who need a scalable way to keep everything crisp and print-ready. The build quality of the storage boxes themselves is impressive, featuring robust gaskets and secure latches that inspire actual confidence in their airtight claims. They aren't just passive bins, either; the integration of a built-in hygrometer and a dedicated desiccant compartment turns each box into a high-tech fortress for your PETG or Nylon. Having a fleet of these boxes allows for a "set it and forget it" mentality—you get the professional results of a dry box setup with the flexibility of a modular library.
R**J
Efficient at keeping filament dry and workable post dehydrating. Excellent Product!!!!
Outstanding product. Packaged very well and secure for shipping. Printing mostly PETG, they keep my filament in a perfectly workable state after dehydrating. The digital hygrometer is very responsive and accurate enough for the use case give or take 1-5%. They are nice and compact fitting nicely on shelving for storage. I am a little worried about the clamping sides as they are slightly tough to snap on and engage. Putting the lid on slightly wrong may result in breaking those clamps. I would keep an eye on this. The filament holes on the top and front are great for their use case. I look forward to purchasing more of these as my color library continues to grow. Highly recommended 5 Stars.
M**L
Trocken, platzsparend und angenehm in der Handhabung!
Eine platzsparende Trockenbox mit einem durchdachtem Konzept. Ich hab viele Trockenboxen und aufbewahrungslösungen probiert, wobei alle irgendwo nachteile hatten, die mich gestört haben. Sei es unhandlichkeit, schlechte Raumausnutzung, mangelhafte Abdichtung etc etc, daher bin ich schlussendlich bei der Polydrier box gelandet. Bis jetzt kann ich wirklich nicht meckern, der Deckel hält richtig gut und Luftdicht, der Filamentauslass funktioniert wie ich mir das vorgestellt hab, die Rollen laufen akzeptabel leichtgängig (mit der zeit laufen sie leichter wie zuvor, keine Ahnung wieso und ob das ein allgemeines Phenomenon ist) und das Filament bleibt wirklich lange trocken. Seit ich die Boxen gekauft habe lager ich PEBA und PPA CF darin, ohne zwischendrin zu trocknen oder das silicagel zu wechseln, und die relative Luftfeuchtigkeit beträgt immer noch unter 10% (weniger kann das Display nicht anzeigen). Der einzige Mod hierbei war das zusätzliche Silica gel welches ich in allen meinen Filamenten habe, das ist mit einem gedruckten halter in dem Loch der Filamentspule um es länger trocken zu halten (auch für Filamente im AMS ganz praktisch). Alles in allem eine gute, wenn auch nicht günstige Aufbewahrungsbox. Andererseits kostet bspw. mein PPA CF Filament weit mehr als die Box welche es schützt, von dem her ist das schon Okay... Die Dryer Base habe ich jedoch nicht gekauft, die Trockentemperatur ist für meine higher end Filamente sowieso nicht genug und wird von einem richtigen Trockner übernommen, aber wie gesagt muss man glücklicherweise nicht oft nachtrocknen, also bin ich damit zufrieden.
Trustpilot
1 month ago
3 weeks ago