

๐ Light up your trail and turn heads with rugged style!
The Rough Country High Clearance LED Flat Fender Flare Kit for Jeep Wrangler JK (2007-2018) offers enhanced tire clearance with 9" front and 4.5" rear coverage, integrated dual LED marker lights for superior night visibility, and durable UV-stabilized TPO plastic construction. This complete 4-piece set installs easily with included hardware and is backed by a limited lifetime warranty, combining aggressive aesthetics with practical off-road protection.
| ASIN | B09NP2M39D |
| UPC | 843030109929 |
| ใใใใๅบฆ | 5ใคๆใฎใใก4.5 99 ใฌใใฅใผ |
| ใจใณใฏใญใผใธใฃไปไธใ | _____ |
| ใซใฉใผ | ใใฉใใฏ |
| ในใฟใคใซๅ | ใขใใณ |
| ใใฃใใใฟใคใ | ่ป็จฎๅฐ็จใใฃใใ |
| ใใฉใณใ | Rough Country |
| ใใฉใณใๅ | Rough Country |
| ใกใผใซใผๅ | Rough Country |
| ใกใผใซใผๅ็ช | 99037 |
| ไปๅฑใณใณใใผใใณใ | (2) ใทใฐใใซใฉใคใใ, ใใญใณใใใฉใคใใผใตใคใใใฌใข, ใชใข้่ปขๅธญใใฌใข&ใชใขๅฉๆๅธญๅดใใฌใข, ๅฉๆๅธญๅดใใฌใข, ้ๅ ทใ |
| ๅๅใฎๅ ฅใๆฐ | 1 |
| ๅๅใฎ้้ | 7.37 ใญใญใฐใฉใ |
| ๅๅๅฏธๆณ (้ทใxๅน x้ซใ) | 78.7 x 27.3 x 7.6 cm |
| ๅๅๆฌไฝใตใคใบ | 78.7 x 27.3 x 7.6 cm |
| ๅๅ็จฎๅฅ | ใฉใใซใณใใชใผใใคใฏใชใขใฉใณในใใงใณใใผใใฌใข 07-18 Jeep Wrangler JK - 99037็จใ |
| ๅ็ช | 99037 |
| ๅค่ฃ ไปไธใ | _____ |
| ๆ่ณช | ใใฉในใใใฏ |
| ็ด ๆ | ใใฉในใใใฏ |
| ่ชๅ่ปใฎๅใไปใใฟใคใ | ่ป็จฎๅฐ็จใใฃใใ |
| ่ชๅ้จๅไฝ็ฝฎ | ๅๆนๅค้จ, ๅพ้จๅค้จ |
| ่ฒ | ใใฉใใฏ |
| ่ปไธกใฎ็จฎ้กใจไบๆๆงใใใ | ใธใผใใ |
J**N
Great price, great quality
I used to think R.C. Was cheap junk. I was wrong. The fenders are high quality and I think they look great. They gave me the fender coverage I was looking for. The price was very reasonable. I also have the RC headlights which I am very impressed with and a 2.5โ RC lift. The springs have a soft ride although I did upgrade the base shocks to fox 2.0 as the base RC shocks tended to bottom out too quickly off road. They were very plush for on road, but too soft off road. Also replaced the stock bump stops with sumo springs. Highly recommend those over the more expensive King type bump stops.
B**S
No serious issues with installation.
If you do not have a nutsert/rivnut installation tool, I recommend that you purchase one. The flares require quite a few nutserts to be installed. A tedious, time consuming process if you do not have access to the correct tool. All holes in the flares lined up with factory holes. The factory holes will need to be enlarged to accept the supplied nutserts. You will need a 27/64 drill bit to enlarge the factory holes. When the factory drilled the installation holes in the flares, their tooling left quite a bit of plastic chaff around the holes on the inside of the flares. I recommend that you trim this chaff away in order for the flares to fit tightly against the body. I trimmed the holes with a razor knife. The Jeep pictured is running 35x12.50 tires and I get minimal road spray on the Jeep when driving in the rain. Anyone following you in inclement weather will not be as fortunate. The rear of the back flares do not extend down over the tire very far and leave a substantial open area. Expect quite a bit of water to rooster tail out the back of the Jeep when highway driving in the rain. . Overall a nice set of flares at a decent price with most of the functionality that I was looking for. I am happy with the purchase.
M**N
So far so good.
The only issue is some hole were a little off. Simple fix. Definitely recommend.
D**.
Decent product
I want to start by saying that these fenders are good and solid. But there's just a couple things preventing my rating from being a 5 star: -According to rough country's instructions, you skip drilling out the second hole from the front of the fender well. This is not the case, you skip the third hole. This did not come to my attention until it was too late. -The pre drilled holes in the fenders don't line up very well with the holes in the Jeep. I was able to apply enough pressure to force the holes to line up in all but 1 hole, which I had to oval out a bit so the bolt would thread properly. -The front fender amber lights are nice and bright, but I'm not a fan of how they install. You have to cut the OEM connector off and direct wire the new fender lights. But that being said, these fenders mount solid and look good. Even at speeds of 60mph they don't move, wobble, shake etc. I do recommend these fenders as an alternative to tube metal fenders.
M**S
Good quality for the price.
I liked the looks and quality of these fenders. Easy to install with everything included. Price was good and received right away.
Trustpilot
2 days ago
2 weeks ago