Master Airbrush Portable Airbrush Spray Booth Station with LED Lights

I've gotten into airbrushing as a hobby, and another one of my hobbies is 3D printing. Sometimes, to use up old filament, I 3D print decorative objects to give to family and friends. Recently I discovered I could give old, unwanted 3D prints new life by airbrushing them. It's often windy where I live, and I don't have a way to set up a reliable airbrushing workspace outdoors. So, I looked into small booths and decided to try this. This booth fits my needs almost perfectly. I'm one of the not-so-smart folks that doesn't wear a respirator, so I really wanted a booth that moved a lot of air. Between this booth's ability to do just that, and it's portable nature, I'm very much satisfied with this booth!! I have a glass top art desk, and the top can be tilted up to act as an easel of sorts. I'll tilt the top up for some painting and airbrushing on paper/canvas, then lay the top down flat for pencil/pen drawing, or for this booth. Setting up the booth is fairly easy and doesn't take long, and since my art desk is in front of a window, I can save the filter for next winter and use the included duct hose to rout air out of the window. With this, so long as I keep my airbrush and chemicals inside the booth, I get zero fumes. The booth does a great job at evacuating the fumes into the duct hose and out of the room. If I have any complaints about this booth, it's the lighting. Unlike other reviewers' experiences, the lighting in my booth is clear. It's not yellow or blue tinted. But, it's so bright and focused, it causes washout. It can be really difficult to airbrush small patterns and spaces on my 3D prints due to the intensity of the booth's lighting. For the price and other features of this booth though, I'll live with it and I'm glad that for once I'm not complaining about lack of lighting. I didn't think I'd appreciate this booth's portable nature as much as I do. It's so nice to set this up on my art desk for a few weeks to airbrush 3D prints, then completely take the booth down and set it aside so I can tilt my art desk's top up for some painting. The packed booth doesn't take up much space and is easily moved and transported. One nuance that intrigues me is that this booth runs on 12 volts. So, with fabrication of a proper lead, one could connect this to a 12 volt battery for power, allowing this booth to be truly portable and used even when there are no wall outlets nearby. But I'm starting to digress here. If you're looking for a portable airbrush booth whose features will work for you in a similar way as they have for me, then this one is very much worth considering!

I Just Purchased One of These Spray Booths the Same Company A While Back As One Big fan in the back but this one I like very much and believe it or not was cheaper than the one I purchased because it works very well like the lighting like I can change the filter so easy I like have bright lights up and I like also the way pulls out the paint spray very easy never good product. For someone that is housebound this works out well for me I'll Be 86 This April and I Want to Thank You so Very Much for Helping Me to Breathe Much Better Open around Long Enough to Really Enjoy the Reason I Make This Statement Not Because I'm Feeling Sorry for Myself I Have a Heart Attack in 1983 a Massive Heart Attack They Told Me It Only Had Five Years to Live Now It Is Told Me Again That I Have Prostrate Cancer Came Back and I Only Have You May Have Other Foolish People Run along They Really Don't Know What to Talk about I'm Not Going Anywhere Real Fast the Man Upstairs It Makes Decision and I Was Told of the Young Boy I'm Irish and Proud of It and That When You Hear the Flutter of the Angel's Wings That Your Time Haven't Heard yet Couple Time to Do It but No Not Really God Bless You All and Thank You. Mike

I’ve been using the Master Airbrush Portable Spray Booth for my scale modeling projects, and it has quickly become an essential part of my workbench. Here’s a breakdown of my experience: The Highlights: Powerful Performance: The exhaust fan is remarkably strong. It does an excellent job of pulling overspray and fumes away from the model, which is vital for maintaining a clean environment. Integrated LED Lighting: This is a standout feature. The built-in LED system is powerful and incredibly useful, providing crisp, clear visibility that helps when applying thin coats or checking for imperfections on small parts. Easy Assembly: Setup was a breeze. It features a smart, foldable design that snaps together in minutes without needing any tools. Highly Functional: For scale models, the rotating turntable and the overall booth depth are perfect. It’s a very practical solution for hobbyists. One Small Note: Noise Level: It’s worth noting that the fan is a bit loud. While the suction power justifies the volume, you definitely know when it’s turned on. However, for the air quality and visibility it provides, it’s a trade-off I’m happy to make. Final Verdict: Despite being a little noisy, this booth is a fantastic investment. The powerful LED lights and strong extractor make it a highly functional tool for any serious modeler.

I only made one mistake, I didn't buy the bigger one (for larger projects). This spray booth is awesome. It pulls air efficiently, quietly, and filters the paint overspray mist very well. Paint overspray gets trapped in the filter, and only the fumes get to the end of the exit nozzle. This was important to me, because my car was parked outside of the window and door I was venting from. I'm very picky about my car, and didn't want overspray or film to be on it. This spray booth is very brightly lit, and you can pick flaws out of what you're about to spray, before you get started...to correct those and see every detail. I can't find any faults with this booth. I would buy it again in a minute if I needed another. I think it was worth every penny for what you get out of it. As I said, it draws air very well for airbrushing or spray painting models or just blasting dust off prior to paint application. You can see the mist getting pulled out of your way. I was spraying model lacquer, and that is some dangerous stuff. Make sure you wear a quality respirator. After you're done spraying, leave the booth on a little longer to draw out any remaining fumes from the paint drying out of the room. I am really happy with this booth. It was easy to assemble, set up, and break back down for storage, but I have had so much fun with it, I might just keep it up all year. If you travel, it is easy to pack up and take with you. It is a reliable, dependable, easy to use and well built portable spray booth. Cheers!

Great item! Actually bigger than expected. We've ordered things here and when they show up we're like "Wow it's tiny". Not the case here. Dual fans remove paint on a hurry. The extra long exhaust hose helps to get to the nearest window. The only negative is that the exhaust connection to back of booth is weak and requires duct tape to seal and keep securely attached. The unit has some volume but on not annoyingly so. Great value because my lungs are worth it!

This is very well made unit. All of the components are sturdy plastic, with very good fitment. The LED lights are very bright. The fans are very strong. One issue is that the fans are one speed and rather loud - however, they are strong fans. I am just gonna throw on a pair of over the ear noice canceling headphones. The window insert has no weatherstripping, and no lengthwise insert - I will just 3D print something for when I put it in the window. Will see about longevity after use.

Absolutely love this unit

The hood is great but one of the three LED piece does not work. Amazon does not allow exchanges (so I can do a swap of the LED) and I've already used the booth so I can't return it. A side from this, the product is fantastic and is a great addition for anyone looking to airbrush. I'm going to try to get this issue resolved and will raise the rating back to the five star it deserves. EDIT: After further inspection, the power socket for the LED that sits on the fan was pushed out the rear. After realigning the socket, the filter, and the light; all is good. EDIT2: After getting a chance to work with it a bit more, I noticed that the light isn't even close to white point of 6500k. It is very blue knocking my perceived colors off. To give you guys some perspective, I was working with my kit around 5PM in California, sun is out in full force. The walls from my patio are light grey but after working under the hood for ~15 minutes the retina fatigue sets in. That same light grey was now very yellow. I could barely tell if the paint I had layered down was the right tone. TD;LR: If you care about painting with color accuracy, forego the LED kit. It'll mess with your eyes.

Es compacta, perfecta para espacios pequeños y para pintar los gundams sin andar dejando todo el lugar lleno de brisa de pintura

Good product, don't take much space. good look too !!!

Muy útil para el uso de aerógrafos en interiores o en espacios con poca ventilación. Su ensamble es sencillo y su portabilidad la hace muy versátil. Soporta grandes cargas de trabajo sin sobrecalentarse aunque en lo personal la dejo descansar 20 - 30 minutos por cada hora de uso continuo. Imprescindible para los entusiastas del modelismo.

Of all the things I’ve purchased for modeling, such as airbrushes and quality paints, This! spray booth certainly was one of them more enjoyable and valuable additions. The fan is strong, the lighting is excellent and not having to worry about paint particles really makes a difference. I really feel this paint booth would be OK to use in the house as opposed to the garage, just got convinced the wife it’s safe!!

Was looking forward to use the spray booth and start painting my models. Unfortunately, the LED lights do not work as planned. The instruction manual is quick and concise but does not tell you the entire operation of the spray booth. When I plug the connector to the master On/Off switch and the other connector to the LED lights, the fan will not start unless you press the light switch button (and there is no On/Off indicator) which the instruction manual does not tell you. Then I find the LED connector plug is actually quite loose which I believe is a contribution to the LED lights not working (due to perhaps faulty design). Instead of fiddling with this, I just retuned it and will look for another spray booth.