TRACK ARMOUR® 3" x 100' - Temporary Paint Protection Film for Car, Truck or Motorcycle. Clear Adhesive Film to Protect Paint, Clear Bra or Wrap for Track Days, Road Trips and Off-Roading

When I traded in my older SUV for a new one, I swore that I was going to do what I had to do to protect the front end from our 10 hour trips from Georgia to Florida. I tried other methods including the paint on liquid, and while it helped somewhat with bugs, it did not do much for rock chips and definitely did not hold up in the rain. It's been almost a year and I am still finding bits of the film that need to be removed. I also went the route of using blue tape, which when covered with a layer of duct tape, held up well, but took forever and looked very overkill for a family SUV. Luckily I found Track Armour. Short story is that it held up great and fully protected my hood and bumper from anything the road threw at it!! Things that mattered to me: - Protects from not only bugs but also rock chips - to avoid the sandblasted look on your bumper - Held up through insane rainstorms - other products peeled off after some water got under edges - Removed easily essentially in one big piece - Travels easily and can be reapplied before return trip - no tools, no spilling One note - if you give this a try, and I highly recommend you do, don't be hard on yourself if it does not look great. While it is clear, and is easy to apply, it is not easy to make it look like nothing is there. Expect it to look like you put packing tape on the front of your car, suv or truck. Just know that the visual sacrifice is more than worth it to arrive with your front end as clean and blemish free as it was when you started your trip.

Used this to prep my car for a 650 mile drive to a track day and back. Tape stayed in place during the drive to and from track. It absorbed damage that would have chipped the paint. Removal was quick and only minimal residue along some seems remained. A quick wash and car looked as good as before application. This is a great sacrificial barrier to protect your car.

I track regularly and have 2 cars I take to the track, my 2006 BMW Z4 M Coupe, and my 2017 Corvette Grand Sport. Long before that, I used to be the guy that spend an hour meticulously taping up the front end of the car, then covering it up again with a removable Colgan bra. Eventually I've come to accept chips and tire marks as a fact of life with driving a high performance car on track, and especially if you intend to take it to a high speed, high bank track like Auto Club Speedway where if you get stuck behind a car at the right time through the banking portion of the track, you have no choice but to get peppered up front. Over time, the front end of the Z4 M Coupe look like it had been sand blasted. About 3 years ago I chose to have the bumper removed and repainted. Even then, some of the deeper impacts still shows up. Eventually I will have the bumper stripped, sanded smooth, then repainted, but that's a ton of work. With the C7 Corvette Grand Sport, I decided to give this TrackArmour product a try. The application is actually relatively easy and straight forward. Certainly much easier than painstakingly applying strips of painters tape only to have it look like you're at the track for the first time with your "precious". From about 20' away it's barely noticeable on a white car. I'm sure on a darker color car, all the bubbles and creases would trap light in just the right way to make it a lot more noticeable. But hey, I'm not really all that concerned with the look while on track anyway. It's very low tack, almost like a cross between low tack vinyl sticker and, dare I say it...static cling. Even during application it is very easy to peel off and reposition, which is a big plus. However, it tears easily and does not stretch like typical vinyl or clear film, so be careful trying to pull and stretch. Also, it sticks well to clean painted surfaces, but it does not stick well to itself. After a session of 140+mph into the banks of Auto Club Speedway, some sections that overlap started to peel back. About 2 sessions in, roughly 15% of the application show signs of lifting on track. In a way though, it's not bad. Especially if you overlap certain areas. At the end of the day, the high impact area of the front bumper stayed relatively clean, even though the product look like it's been through hell. The bumper and hood areas that were covered, a simple peel took all the tire marks off. And after some light detailing the car looks as good as new, except areas that weren't covered by the TrackArmour product has some pin-hole sized mark in the clear coat from debris impacting the surface. Next time I've got to be sure to apply the product on areas like the mirror and A pillar. My garage mate suggested products like Xpel clear bra, but for the cost of an Xpel application you can buy 100 rolls of this. That's enough for 200 track days, 800 track sessions. I don't think any clear bra applications can last that long through that much blasting. This product works as advertised for tracks that you KNOW you will get a heavy dose of track rubbers and small rocks being kicked up by the car in front of you as you follow through a high speed sweeper, as a non-permanent solution, and its easy to apply and easier to take off.

This works really well, really my rating is 4.5 stars, as the application process, while simple, does not give the most pleasing appearance and its hard to have no "bubbles", but i was not looking to spend a long time applying it for perfection and really, who cares, on a light colored car and from a distance its fine, and its only temporary. I used this not for the track, but for long distance travel where i am trying to keep rocks and other road debris off of the car. I have used this for a 5 days at time and then used it for about a week and a half. Both times, the tape came off without any issues, residue or paint damage, i cannot say i am doing anything different before applying, other than making sure its clean, but works for me. During this time, the tape has been rained on as well and has been in direct sun.

Purchased this to pick up our brand new ZR1 from the Corvette Museum. We spent a few hours installing the track wrap prior to making our drive home (12+ hrs). Within 30min of our drive this stuff starting peeling off. I’m not sure how anyone could say this is rated for “tracking cars” — wouldn’t purchase again…

After trying out xpel tracwrap I was hooked. It’s such an easy way to keep paint free of rock chips and rubber marks on track/autox days. However, xpel was so expensive I wanted to try out a cheaper alternative. And I gotta say xpel is worth it. It sticks so well even after ceramic coating my car, and adheres through 130mph+. Track armour was flying off around 100mph+, and it’s much thinner than xpel. I’d say around half came apart in the front after the first session. It also stuck moisture around badging and parking sensors overnight whereas xpel kept its seal. If you’re planning to use track wrap for multiple days & sessions, I’d stick to xpel. If you’re just planning to use it to low speed autox or long highway cruises, this does the job!

Super happy with the paint protection this gave our 4x4 on an off-road trip across the desert between Joshua Tree and Las Vegas. Will definitely keep this on hand for future rides. Many other vehicles with us had scratches down the sides of the body from branches and brush. After we got home and removed the product, not a scratch made it through to the paint. Jeep was as gorgeous as before we applied it... except for the mirrors... forgot to cover the sideview mirrors and they got scratched. Not for plastic headlights. I think the adhesive would delaminate the clear plastic upon removal. That said, it is very thick and I don't think I can ever get it to be invisible like a clear bra. Don't think people won't notice this stuck on the car. But the point is to protect the car temporarily (we had it on for 6 days) not run with it long- term. Way better than painters tape (stronger for sure, looks better) No liquid used for installation. Peel the backing and apply. Think of the direction of wind and rain and run the seams accordingly. I added black gaff tape around the wheel wells to keep any edges from lifting at highway speeds before the trails. I bought automotive vinyl decal tools to help. Def worth the few bucks for that to help stretch it around contours. Took 4 hours to do the whole car. I'll be faster next time. Pic added at removal showing the difference

Delivery was on point, arrived right on time. The application was surprisingly easy; I'd definitely recommend getting some help to make it even quicker. Even with no experience in ppf or tint, I found it straightforward. The quality was impressive; it survived a 1200-mile road trip without any issues. I did double up in some areas to withstand high winds, and it held up perfectly. Removing it was a breeze, leaving no residue behind (check out the before and after pics attached). I left it on for 5 days, including through rain, and it held up like a champ. Applied it on a clean, dry surface on a warm day. The squeegee that came with it was a game-changer!

This stuff is awesome! I was pondering whether to get my front bumper wrapped to prevent stone chips on a Switzerland road trip. Cost of a full bumper wrap was £800 and required professional removal also at cost. This temporary protection tape is easy to apply and whilst visible (if you look closely) does a great job of protecting the vulnerable areas on your bumper and wing mirrors. I did 2000 miles and not a single stone chip. It also removes without leaving any marks. Recommended!

Très bon produit !

Went on easy came off without affecting decals on the car I’ll buy it again

I can't tell what this Track Armour tape hates more: cold weather, rainy events, me, itself, or, from reading earlier reviews, it might just intensely dislike Porsches. I read the instructions and painstakingly applied the film on the last non-rainy day before a track event, drove to the event (in the rain), did track stuff for a couple of days (in the rain), drove home (in the rain), and then tried to remove the film (as the rain stopped, hilariously). The film was difficult to apply, as it comes off the roll without a backing paper or anything, so you have to manage the roll with one hand, guide the tape on with two hands, smooth it down with one more hand, and cut it with yet another hand, which is a few more hands than I currently have on my body. I might rate it one star higher if I was an octopus. The film comes off the roll with a very light tack, so to the touch it feels very lightly glued, like a roll of vinyl film and a stack of yellow Post-It notes had had a love child that likes auto racing. The film stuck poorly to itself, so some of it was flapping around after getting rained on for a while; eventually, I just cut any overlapping parts off in the pits because the flapping was getting annoying. The film does, however, stick very well to paint. Surprisingly well, in fact. Far better than one might want. The wrap was on for seven days, which would appear to have been approximately seven days too many. While it ostensibly did prevent track debris from damaging my paint, and protected it from a door ding in the parking lot as well, almost none of it came off cleanly, leaving a *very* tacky, sticky white residue on the car wherever it was applied. It is not without its irony that the very intimidating amount of glue that is now left on my car is much, much stickier than the wrap was when it came off the roll. If it were any stickier, I could use it to store the car on my ceiling to free up floor space in the garage. If the manufacturer included a detailing spray for removing the glue, I might rate the product higher, or if they provide one separately, one might conclude that the wrap is a cruel joke designed only to make you purchase the spray. While, as noted in an earlier review, it is quite a bit less expensive than the xpel stuff, I am forced to conclude that that is for some good reasons. All in all, while it *technically* did the job it claimed to, it did everything else unsatisfactorily and I cannot in good conscience recommend it. Update, several days later: After spending a solid EIGHT HOURS working at it with a combination of isopropanol, automotive Goo-Gone, and car washing detergent, I managed to get most of it off. Because I am an idiot, I also managed to scrub some of the dirt that had become trapped in the edges of the glue lines into the car's paint, causing some pretty nasty swirl marks that I have to buff out now, and the cleaners have pulled *all* the wax out of the paint, so it's looking pretty hazy. That's not technically the Track Armour's fault, but it was certainly complicit. I am pretty sure that I would have preferred a little track patina over spending the time I've spent cleaning and the time I'm about to spend cut-polishing to get the paint back to where it was before I put this stuff on the car. If you are considering using this product still, I would recommend that you instead just skip the middleman and key the crap out of the front of your car yourself. You will then have sixty-five bucks in your pocket that you would not have had otherwise, and you can then spend that money on polishing compounds to fix the scratches and then on whiskey to take the edge off the regret while you polish your free time away.

It will definitely work to protect from chips and scratches. It goes on fairly easy, but I found that it leaves the air bubbles trapped underneath when using soapy water to assist with install. I did have to remove a piece, and it does leave pieces of residue behind. They do wipe of fairly easy. With all of this said, it may have been how I installed it. It will definitely do what I bought it for.