Matterport Pro3 Custom-fit Hardshell Case for Pro3 Lidar Camera

Exactly as described

Really helpful

The design for this looks almost identical to SKB, a huge case manufacturer, albeit with some different latches and a slightly different design on the outside, but the handle and the contours pretty much say "SKB".. However, when I opened it, it suddenly did not SMELL like SKB... I am not sure if it is the closed-cell foam that is in there for the camera or what, but it is NOT the pick foam like I thought it was going to be, it is a molded case already, thankfully it can be removed. However, the smell is extremely strong, and not really sure how long it will take to air that out. It is so bad I had to knock one star off of it because it is something I cannot use for a while until the smell is not as strong. The case itself though is well made and should last a lifetime, just as long as the smell doesn't.

Most expensive empty box I’ve ever purchased. Wheels broke off and no replacements are available from the manufacturer.

As far as the case itself goes, I feel it's a good budget case. I wish they hadn't already plucked the foam on the interior so you could easily use this case with whatever gear you want. I imagine you can just purchase new foam insert from somewhere. The case seems quite tough. Right up there with similar budget priced cases I have seen on Amazon.The issue was then when I opened the case, there was such a bad smell coming out of it. I believe it was some kind of chemical treatment that applied to the foam or the interior of the case. I am going to sit the case, open, out on my back deck for a couple days since the weather is supposed to be nice and see if it goes away. If for any reason the small does not go away I will come back to this review and mention that. If there is no update then it means the initial smell has gone away.Lastly I feel this case is over priced. I went looking for other cases that are the same size of this case and even found similar ones, with the same build quality that were actually a couple inches larger and were $50 cheaper. Plus those cases had all the interior foam intact. I found several more that were even $70 cheaper. I guess I just can't really see why you would spend more on this one simply because it has the foam plucked out for Matterport gear which is exactly the same thing you can do yourself with the other cases I saw. If the price of this one drops below $150 then it might be a good deal assuming the smell goes away.

This is a very commercial grade solid case that if it was accidentally dropped out of an airplane the contents in it would survive. Yes, there is some adjusting of the foam to satisfy your specific needs and equipment, and yes you may need to buy more foam. The description says that this case is for cameras, tripods, equipment, with foam insert for Pro 2 3D camera, but really you can set this thing up how ever you want for whatever you want.The case is very intimidating and looks like something you would see a person walking out of the Pentagon with! The handle feels very good in the hand, and the latches are very unique where there is no way that they could open up on their own. The build quality is strong and solid, and I can highly recommend this case.WARNING: You will need to take the foam insert out and let the foam sit outside for hours because of the very strong chemical smell. After several hours the smell is gone and you can start to use it, and customize it.

Yes, it has Matterport Branding, however - I found the functionality of this flimsy backpack very marginal. Matterport cameras are an inve$tment that needs protection with ample cushioning and packaging, I have had to add more robust cushioning on the camera compartment. The shoulder straps should've been more reinforced, they feel like the stitches would fall apart in a few road trips, and the side part that's suppose to hold a tripod - is literally a poor effort in design and craftsmanship - 2 strips of velcro sewn onto the sides. Likely will go back to my modified backpack that I customized for my 1st Matterport camera from 2014. Disappointed.

When I first saw this case advertised, and that it was made by Condition 1 for Matterport for their $3,400 camera system, I tried to understand how it could cost so much more than the really nicely made Condition 1 cases. Already owning numerous Condition 1 cases, I assumed you were only paying for the fancier name on the case. I was wrong.Unlike other interior pictures of the Matterport case on this site, the case I received is significantly nicer than the Condition 1 cases. The case itself is nicely made, the handle a nicer quality. The latches have a dual-locking system, different than the traditional cases. These are much more secure. There are two places to secure the case with a lock, as well.The foam lining is more than just the traditional “tear-out” foam chunks. This foam has greater density and does not have the pre-scored foam that is easier to cut apart. It was made for one purpose – to protect a Matterport camera system.Waterproof and loaded with high-density foam padding, this case is designed to protect your investment.