GLOTRENDS M.2 NVMe to PCIe 4.0 X4 Adapter with Heatsink for NVMe SSD

I have to give 5 because of the price. Red LED is bright (electric tape req'd, not big deal) and it does install upside down in my case. Which might be a good thing. I have no idea how thermals in my case are pro/con for GPU and other things by this fact. Also I figured I'd get the full 7,000 mbps I expected for WD Black, but that's my bad for not reading product details. I haven't tested. 6,300 or whatever it states for Gen4 is pretty damn good to add an extra drive to the motherboard. You can hardly buy anything for $10. This is a great value. So 5 stars. 0 setup issues, simple.

I needed a quick fix to let me use a second NVMe drive in my PC, and this has been working great. No latency or data bandwidth difference between this and my motherboard’s built-in NVMe.

I have an older PC with an X99 Extreme4 board that is perfectly adequate for productivity and gaming, but unfortunately only has one M.2 slot for adding storage. This card was cheap enough that I was comfortable rolling the dice, and I was thrilled to find that it’s compatible out of the box! I haven’t tried booting to a drive in this adapter, but the BIOS recognizes it so I have no reason to suspect it wouldn’t work.

It works great with the Gen 3 NVMe I bought, but I'm not a fan of the red LED. Still, it's super easy to mount.

Seems to work fine, though I've been using it at only PCIe 3.0 x4 speeds. No noticeable latency

This is working excellently in my older PC using an ASRock Z97 Extreme6. I had an SSD with Windows 7 in the Ultra M.2 slot. The Ultra M.2 slot was special because it was on the PCIe 3.0 lanes from the CPU. With an SSD there, the 16 PCIe 3.0 lanes from the CPU were 8 to PCIe x16 slot 1 (your graphics card), 4 to PCIe x16 slot 2, and 4 to the M.2 Ultra slot. I wasn't running anything needing full 16 lane bandwidth to the graphics card. The SSD access speed up was far more beneficial. Upgrading the system to Windows 10, I wanted a new fresh SSD for that, and would just move the Win 7 SSD to the second M.2 slot (which ran off PCIe 2.0 lanes from the southbridge, sufficient for archive access). Got a new WD_Black SN7100 (PCIe 4.0 native, but should downshift to the slot's 3.0 capability). Even when messing with the BIOS to get it to show storage in the slot, could not boot that thing for nothing. Played with it, searched, others had issues, going PCIe addin board seemed the answer. Thankfully, these boards are not very expensive. Put the Glotrends board in the second x16 slot (which gets four lanes in the current config) with the new SSD mounted to it. I didn't bother with the heat pad stuff. Cooling in the case setup will keep air flow right over the board all the time. Booted up and installed windows and been booting and running no issue since. Excellent! So now there's the GPU on x16 slot 1 with 8 lanes, the old SSD in the M.2 ultra slot with 4 lanes, and the new SSD on the Glotrends board in the x16 slot 2 with 4 lanes. And it's all working great. Glad the product was out there so I could simply update the OS without having to invest a lot of money in any other new components.

Works, plug n play, no issues

Works as advertised. I was able to make use of some SSD drives I bought when they were cheap, and though I didn't use the provided heatsinks (I bought some better ones), they looked good enough that I almost regretted not just using them. There's a little drive activity light on the board, which I wasn't expecting. It's blue, so keep that in mind if you're building a PC with a glass window and you want all the lights to match. For anyone who doesn't already know: you can use these on a larger slot than they physically require. The bus will recognize how many lanes are in use and reduce bandwidth to what is required.

Works.

Easy installation, worked straight away with a 2TB Samsung 970 EVO Plus.

I thought I could get a NVMe to 2.52 sata enclosure - how wrong was I ? I got a NVMe to use as a standard SATA in this PC to future proof as most of my kit are laptops and they are all now NVMe, so thought I'd get one of those, get the 2.5 adaptor and use a spare SATA port and be done. - nope Saw this at a reasonable price, decent reviews. I did have a slot to use otherwise that would be a problem. I read the other reviews about the metal clips being suspect, so I simply went for the rubber bands (I had 3 in my pack) which hold the heatsink on pretty well - not sure if my drive needs it as it has a heatsink layer on it, but still Device was read by the machine and installed into the OS with no problems. Moving data around and I am getting pretty good speeds between the various drives in my device

I ordered it because I didn't have a second NVME slot on motherboard. Only use it for games and vfx, so far works flawlessly without any issues.

ヒートシンクにつける金具がちょっと怖いくらいであとは全て表記通り。正常動作。安い。