






Product Description WORKPRO Non-Contact AC Voltage Detector Voltage Range: 12--1000V Frequency: 50Hz/ 60Hz. Alarm Mode: Sound and light alarm Flashlight: UV light and White LED Light Power Supply: 2 * 1.5V AAA Batteries (Included) Auto Shutdown: 60 seconds of inactivity for saving energy Item Size: 160 * 20 * 20mm Item Weight: 44g Instruction Detecting AC voltage by turning on the meter and approach the wire to test. The induction light will flash in red and buzz if the wire is live, and the buzzer emits a different audible alarm depending on the signal strength. The stronger the signal, the faster the buzzer sounds. If it is too dark to detect in confined place, you can use the flashlight to light up. If there is likely a leak, then you can turn on the UV light to check it. What's more, the UV light is also available to check currency and dried stains. Both these 2 lights will shut off after 10 seconds without manual shutdown. Warning Before detecting AC voltage, test the meter on a known live circuit to verify whether it is working properly. Do not rely on the detector to determine whether there is voltage or not on the wire, because the voltage may still exist even if there is no alarm indication for the result may be affected by other factors. Review: Good little device. - Neat little device, work's well enough for what I wanted, comes with batteries, ready to go. It does trigger when it's anywhere near mains voltage, so I was getting a warning when I was within about 12" of a live circuit, but contacting the live wire gave a faster reading, so it was accurate enough for me to ascertain whether there was voltage present when changing a light switch. Good purchase. Review: To Sensitive - Does what its ment to, but VERY sensitive.







| ASIN | B07F14RM36 |
| Brand | WORKPRO |
| Customer Reviews | 4.1 out of 5 stars 123 Reviews |
| Item Dimensions | 16 x 2 x 2 centimetres |
| Item dimensions L x W x H | 16 x 2 x 2 centimetres |
| Manufacturer | Hangzhou Great Star Industrial Co.,LTD. |
| Manufacturer Part Number | W097010A |
| Maximum Operating Voltage | 1000 Volts |
| Measurement Type | Voltmeter |
| Measurement type | Voltmeter |
| Min. Operating voltage | 12 Volts |
| Minimum Operating Voltage | 12 Volts |
| Power Source | Battery Powered |
| Power source | Battery Powered |
| Style | Compact |
| Style Name | Compact |
| UPC | 820909748106 |
J**N
Good little device.
Neat little device, work's well enough for what I wanted, comes with batteries, ready to go. It does trigger when it's anywhere near mains voltage, so I was getting a warning when I was within about 12" of a live circuit, but contacting the live wire gave a faster reading, so it was accurate enough for me to ascertain whether there was voltage present when changing a light switch. Good purchase.
C**Y
To Sensitive
Does what its ment to, but VERY sensitive.
B**L
Good electrical safety device
I bought this after moving house and needed to replace some light fittings and sockets. I'm not an electrician but It has proved valuable a couple of times. I always test it first on a know live cable and use it in conjunction with a neon screwdriver tester. Recommended.
J**D
Works very well
Great device although seems over sensitive !
M**.
Dont buy.
Terrible bit of work. Batteries are flimsey and are continuesly losing contact. Couldnt use this for my works day, sent it back the very next day.
J**E
Handy bit of kit!
Nice and easy to use
A**R
Good personal protection
Had to wire up an outside light but had not idea if the switch inside was the correct way round. Didn't want to turn the power off, so used this to determine whether a current was present or not. Very clear indication, could then proceed with confidence.
A**D
Useless
Was going off even when not near electricity would not trust it.
S**E
Tut was es soll
Tut was es soll, war ein "Spaßgeschenk" das jetzt wirklich ernsthaft benutzt wird.
E**O
molto buono, sensibile al punto giusto
Non ne ho provato altri, ma per mia necessità questo mi va bene. Lo utilizzo come scanner per trovare dietro il muro o sotto il pavimento la traccia del positivo per poter seguire i vari caveggi per portare l'antenna ad uscire da una presa, senza dover fare uno scavo dedicato nel muro. Ho anche un metal detector, ma si confonde con l'armatura ed altro ferro, questo no perchè rileva corrente. Per me utilissimo, "scende" fino a 4 cinque dita.
C**N
parfait
trés bien
A**.
ras
Très bon produit
C**T
Niente e piaciuto
Non lo trovo utile,, missa che non funziona neanche ,,
Trustpilot
3 weeks ago
3 weeks ago