HobbyPark 12mm Hex RC Buggy Tires and Wheels Front & Rear for 1/12 1/10 Scale Models Car fit 2S 3S, Set of 4

So I bought these for my bfs RC car they do work good but if you have have a car that goes 63 mph these tires may not be the ones for you. They are not glued to the rim so the tire comes off easily at high speed turns. Better for a slower RC car...still great little tires though! Good grip, they are small tires. If you are looking for the monster truck tires these are not the ones make sure to look at specs!!! My bf still loves these and just glued the tires to the rims so they would work better for his RC car. The 1st picture is the tires, 2nd picture is the tire up against the tires on it now to the left is these tires to the right are the stock tires that came with the RC car. I know a lot of people do not check specs so I hope this helps!

They work great just make sure u glue them first and they are not 1/10 compatible they are to small for my traxxas slash but they grip in dirt

I'm running a team associated b6.2 reedy 3300kv on 120c burst . I ran through a couple small packs and these tires perform pretty decent there's not too much grip but not too little my car is currently set up for carpet on the suspension.I needed tire upgrade instead of my carpet tires for under 20 bucks these tires are great for being so cheap they're good basher tires I would not recommend putting them on concrete or they're probably going to wear out quick for messing around and they're great I would not recommend jumping these on a dirt track because the material of the plastic is pretty thin and they might break but as far as just jumping around and having fun you're good to go

the 12mm hex were the rim mounts to the car stripped out after about 2 weeks. they were mounted on a new rustler 4x4 vxl. the plastic rims are just not strong enough for something with that much power.

So these wheels are not glued. And they are not advertised as such but however I did buy these for a rebuilt bandit. And of coarse glued them, and tried to mount them, so the front tires fit great, good tread, room for steering without knocking on the servo. But the rear tires are the issue. This bandit is not the vxl, it’s a 2wd, I’m running ultra shocks with about a half inch of spacers on the rear, and extended axles w/ the according carriers, plus 9mm hex nuts and I cannot mount the rear wheels. They are too deep. They rub on the shocks. I don’t know how the other person that posted pictures did it but I am running almost exactly what a vxl has on the rear axle and is is too tight. I hope this helps.

I could find very little to complain about with this tire and wheel combo. Yes they need glued but for the price, no issue. The rubber compound seems to be quite soft so I wouldn't expect these to last long on asphalt or concrete. Grass and dirt use is where these tires would be perfect. No issues with the hexes stripping on 2s mounted on my Associated buggy. Included foams are extremely soft but seems to be enough to support the buggy just fine. I would certainly buy another set of these when needed.

Used on Losi mini with different hub nuts. Gave it ground clearance and able to run in loose dirt now. They have taken a beating so far.

Great price great traction i run a 3s and tires holing up fine