New Door Handle Repair Kit Interior Inside LH Driver for 2007-2013 Chevy Silverado GMC Sierra 1500 2500 3500

I was sceptical at first since you need to use super glue to fix the unit. However it has been work properly for months. it actually feels better the the stock part.Watch a Youtube video before the install and it goes in rather easily.

easy to find,quick shipping and fairly easy to install.

Like a lot of people say once the rivets come out the screws supplied are to small so I installed a bigger screws. Its better than 300.00 that GMC wanted to charge for a whole panel

Definitely worth the price! Easy to install. Glad I don’t have to roll my window down to get out the truck anymore!!

Works as it should. Hopefully this company put more thought and used better materials than chevy did.Should'nt of broke in the first place, chevy........

It will do the job. But you will need to get some jb weld and longer screws.

We purchased this for our 2012 Silverado as a dealer wanted $450 to fix the door handle. They just wouldn't listen that it was just the handle and not the whole door panel. We found a shop that only charged us $60 to put it in so all in all $90 to fix our truck. Part came very quickly and is great. Mechanic said he had no issues putting it in and so far all is great on our truck. Highly recommend...

First off, let me start this with saying, I'm extremely mechanically inclined, and have personally replaced quite a few door handles.This product IS a replacement for a broken door handle on (in my case) a Chevy 2500. This is a work truck for the company a literally just started working for (my first job, NOT being a mechanic) the door handle snapped off when I casually was exiting the truck... mortified that I would be fired, I immediately found this one on amazon because I found the OE replacement is technically a whole door panel, unless your Chevy service center just so happens to have the plastic rivet/welder that's actually needed to replace this part. Seeing the price, and glancing at the review stars, I ordered it. I told my boss what happened, and not to worry, I had already ordered the replacement because I felt guilty that I broke it. 2 days later, it comes in and I open the package...Now, as a mechanic, I couldn't remember the last time that I received a replacement part that literally included a brand new tube of super glue, and a shank router drill bit.So I decided to take the door panel off.. that's when I seen the wonderful sight of OE Plasic rivet welds.Also included in the received replacement handle were several screws with washers... the screws, were very short, and were not big at all.No directions were received with the replacement part, which I've also never experienced.But being a former mechanic I knew what was supposed to happen. Drill the welds, remove the old handle assembly, put new one on, use screws where the posts are, and maybe use the super glue to maybe help secure it, if needed.So, drilling the weld tops off was very unsuccessful, as the plastic beneath said welds seemed more like very hard silly putty because the 'screw posts' didnt hold up whatsoever.... so then I thought, maybe they want you to merely super glue the screw into the screw post, because even if the posts retained their shape, the provided screws were not even big enough to thread into. So basically, at this point you have to use the glue to set the screws as basic anchors for the handle assembly. I then, used any remaining super glue and went around the edges, and even that was horrible, because it didnt set inside the opening as seamless as the OE part did. After the install, it was obvious that this part was not going to hold forever... so I had to go out and buy some JB Weld Epoxy, which honestly, would've probably been alot better in the first place, then literally some generic $.50 tube of super glue. I had to basically redo the entire thing with my own hardware, and the new bonding agent.Then, I reinstalled the door panel, and went to install the plastic interior pull handle.... it WOULDNT GO ON. There was a metal 'button' on the under side of it, and an obvious slot that it was supposed to snap into... it wouldnt. I couldn't get it to work at all. That, I also had to install with JB Weld Epoxy.... had I not, the pl handle would come off every time you tried to exit the truck.The next morning, the owner of the company came in to check out the handle... when he saw it was perfect he told me how grateful he was to have me there, because they just paid $600 to have the passengers door handle replaced at the dealership....Moral of the story, I would not buy this product again at all. I'm not saying there isnt an aftermarket replacement for Chevy truck door handle assembly's, but unless your ready for a headache, I'd buy elsewhere.

Since I am handy this was relatively easy for me to install , the actual interior handle is a little difficult to get on at the end and feels slightly loose when opening the door , but I took the time to look up some Utube vids and they all say the same thing , other than that saved my self a lot of $$ and works like it should , will definitely buy again if another should break on my truck

This kit was easy to install and works great

Ok. Not enough super glue in box had to use my own. Part is a little finicky to fit. It is SLIGHTLY too large for space. A little shave on the upper edge will do. The handle is not at a perfect level when done, But the price makes it well worth it. The screws could be a little wider and longer to fit holes. I used my own. I would recommend this part so far. Hopefully, it will last.

Product works well, install was easy enough, but the screws that came with did not work properly, the heads were too small and the washers made the screws to short to screw into the panel. Ended up using my own screws

The item broke during install.The plastic that holds the cable in place snapped while pushing the plastic connector through,and did not use excessive force.I ended up figuring that I would be screwed with another poor quality piece of amazon junk.Wasn't gonna let that happen so drilled holes and ziptied the cable in place.Seems to be holding up fine.I contacted the seller and told them and they immediately offered a replacement without me even asking.This seller is very easy to deal with and stands behind their products.5 stars for me