REK GEN Mud Flaps Compatible with Toyota Tacoma Gen3 (2016–2023) - Heavy Duty Mud Guards for Off-Road Protection - Easy Install - Durable Toyota Tacoma Accessories - USA Made (Stock, Red)

Took about 40mins to install front and rear flaps, instructions were very clear and concise. I used a 10mm to remove the stock fender screws, and 3/8 to install the RekGen hardware (as stipulated in the instructions). They adjusted easily, and I have them extending 1/4 past the tires/fender. Initially I was skeptical with the front and rear spacers being different in length, but installed them as they were labeled in the bag. The front spacers are shorter, and when screwed down the front flaps will be angled in a bit, which makes sense to allow for the tire to turn. The rear spacers were longer and the rear flap is level with the trim screws. They look good, seem sturdy enough for daily driving and light off roading, and were reasonably priced.

Bottom line up front: Overall I am pleased with the Rekgen flaps, confident in their durability and protection and happy with the ease of install. Vehicle: 2018 Toyota Tacoma TRD OR Tire size 265/75/R16 BFG KO2s Was a bit unsure of purchasing these mud flaps in the beginning but am glad I did. The flaps are clearly constructed to weather whatever you throw at them. They are flexible and bend so the risk of them breaking if they hit something is low, yet they are ridged enough to not be thrown around by wind or debris while driving. The flaps are slightly adjustable to accommodate wider wheels. I will post a better close up picture of the tires and flaps at a later date, but the flaps on my truck are currently adjusted as far outside the wheel well as they will go (if that makes sense). Install was easy. I would not consider myself a highly skilled "car guy" and I had them installed within 30mins. The instructional video on rekgens website was easy to follow along with and the mounting of the flaps to the body seems sturdy enough. And last but not least appearance. I'm biased but I personally think the flaps look pretty good. I have the red, but they're offered in a multitude of options.

Added 33” tires to my Tacoma and needed a larger mud flap to extend out past body. These mud flaps are the perfect mud flap, and extremely durable with flexible placement. Came with all mounting hardware and fit perfectly with factory mounting holes. Easy installation, at less than thirty minutes. I actually tried them out extending an 1 1/2" first, and drove around in some mud. Then realized I could bring them an 1/2" and get the same protection. Adjusted them within a few minutes. Perfect fit. Can't wait for camping season to try them out. Do not hesitate to purchase these incredible mud flaps if you are on the market for cool rugged looking mud flaps. RS

The packaging is still mislabeled years and years after being noted by customers. The front hardware goes to the back and vice versa. The product seems like a better option than stock mud flaps but a company that can’t fix a simple package issue is pretty silly really. They aren’t hard to install but the rubber spacers for the front were about 1/4” too long. They did include a link to view installation instructions but they aren’t the best. I’d assume with the right tools, it’ll take about 30-60 minutes to completely install these. It took me about an hour but I uninstalled the fronts after I had them installed to cut a 1/4” out of the spacers. So far they seem like they will hold up pretty good, I just don’t like supporting companies that can’t fix a small issue years later.

I originally had factory molded mud flaps. I increased my tire size and had to change flaps due to some rubbing. After looking at some options and reviews on Amazon I decided on these. I was nervous due to other reviews mentioning difficulty of install and instructions provided. I was immediately happy with the look and feel of the mud flaps on arrival. The parts were clearly marked. I did take a quick look at the install instructions on the provided website. It was a 2 minute read but even if you don’t read it anyone with the ability to use a ratchet should be able to figure out which goes where and how to install them. Total install was about 20 minutes to remove old flaps and put these on. They lined up easily and provide a nice sleek look. They appear flexible enough to bend if caught on something but stiff enough to not bend from the wind driving down the street. I was also amazed how much gunk was between the factory mud flaps and body of the truck. It was causing the bolts to rust quite a bit. I think these ones will do better as they are flat and will allow dirt/mud/road salt to be washed away and not left on the truck.

So far so good...after 200+ miles in the desert and dirt. I will say I haven't had any issues. In the past, all the dust, dirt and pebbles have been flying towards those corners and causing chipping here and there. I do notice a big difference between before and after and I don't think I will be taking them off anytime soon. I have a 2019 Tacoma SR5 and did not have any issues with fitting. All the necessary stuff was included and that made installation very easy. Just follow the QR code and it should be easy peezy. Compared to the Toyota OEM, I would still stick these in terms of functionality, look and bgang for the buck

Easy to install. The hardware that was in the kit was not the same as the website installation videos. The Philips head screws were more difficult than the hexagon ones. I really should have taken a before pic with no mud flaps, because the mud was all over the running boards and up to door handles before rinsing it off and installing the mud flaps. They seem to work well and look good on our 2023 Trail edition. As far as sturdiness and durability that will take a little time to test out. We should probably get the wider ones for our crappy driveway.

great fit on my 23 SR5. really solid and keep the road spray down in the rain. They are quite a bit beefer than any others that I have seen, not like the hard plastic ones, but they don't flap around like cheap ones. I love the fact that they fit perfectly without having to drill any holes, just use the factory ones.

Great addition

These are nicer than the stock ones, a little more flexible, and can poke out past the wheel wells more than stock. I was told they sit closer to the cab and will help clear larger tires so I dont have to run the front without mudflaps. They might have a bit more clearance, but not was I was told. I will still use them in the future when I start trimming more off the inner fenders. They look great.

It came with only the rear mud flap hardware. However, it still worked and the longer bushings still work good for the front wheels. Very durable!