CK T3327GTM LaYZr Tungsten Electrode 3/32" x 7", 10 pack

Great electrodes for every application I've tried. They are never the best for any given process, but with how versatile they are is always a set I have around. Don' have any other electrode than can do aluminum and mild steel. It makes things simple when I don't need to keep track of tips and keep swapping when I'm using one of these. If you are only welding one type of metal all day, get the proper electrode. If you weld random stuff all day, get these. The best metal I find these work on is stainless and are equal to the 2% reds, the worst was aluminum and almost makes me want to change back to green tips

This was mentioned by "The Fabrication Series" on You Tube and I decided to try this in place of my normal gray and let me just tell you...it keeps its point FAR LONGER and handles the amperage great. Arc is crisp, doesn't wonder. The price is fair because tungsten is simply expensive,we all know it. CK makes fantastic products, never disappoints.

I just did some experimenting with my 3/32" when I first got them to see if there was a noticeable difference to the ceriated and lanthanated that I use for steel and aluminum, respectively. Aluminum was first. I ground a nice sharp point for my inverter and ran a few 4043 beads on 1/4" 6061. The standout difference I noticed was after several rods, there was no splitting on the very tip, and very little ball formation on the point even running at 30% EP. No spitting either, though it was a short session and I don't get much from the La electrodes either. During the session, being an old shaky guy, I duffed the electrode a few times, but it shook it off like a champ and I kept on going. Then a fly flew into my arc and exploded carbon all over. same result, just kept going. End of session a small sphere had formed but little else and didn't have to re-sharpen once. Then on to steel. I put a nice slender point on the electrode and ran some beads on different thicknesses from .040 to 1/2" steel and some stainless. The several rods later, the point looked the same as when I started. It stayed clean and sharp. Further, to test the low amperage behavior, I welded some rod remnants together. My machine has a hard start, so it takes bit of control to stick an .040 rod together. All went well and I'm really considering putting my La and Ce on the shelf and just working with these. Really happy with them and will be getting some 1/16"

Has worked well for me on mild steel, stainless, and alumium. I don't get into all the different colors too much. I just use this or 2% lanthanated and call it a day.

I just started learning to TIG weld a few weeks ago, so I'm not sure how valuable my review will be. Also, I'm using one of the more inexpensive DC only TIG machines. Up until now, I was using red coded 1/16" rods and was constantly having to resharpen them because they were burning away. This could have been operator error or I was just using too small of a rod for the work I was doing. Either way, the problem has pretty much disappeared when I switched to these 3/32" rods. With my lack of experience, the colors don't mean that much to me, and I based my choice on reviews on this site and others on the internet. So far, these rods are doing everything asked of them and are holding up much better than the 1/16" rods that I'll now save for thinner material. I'm very satisfied with them so far and plan to stick with them.

I’m totally happy with the electrodes and the way they function, the only reason I took a star off is the plastic case that holds them arrived broken

Exactly as described.

All-around, reliable and predictable quality and performance. These work really well for aluminum, mild steel and stainless steel. I've never welded titanium or any other metals so I've got nothing to say about that. But as far as tungsten goes, I can't tell the difference in performance with the ceriated, or with the lanthanated I've used. Now, I only need one kind. That's a win.

Layzr.... says it all. What an amazing composition and function. I hold 28 years in my trade and have ran thousands of feet of bead, this product is unlike anything g I've used before. Don't hesitate, buy them.

It took a while to arrive in UK from the USA. Really nice electrode I welded some 6mm thick mild steel pipe at 160amps and the tip did the whole job without loosing it's point and made for a very smooth weld...wellade CK world. I'm really enjoying them. BTW I ground the tip particularly sharp. 10⁰ worked like a charm.

Good stainless use and aluminum little job

I know Chartreuse tungstens from The Fabrication Series, on youtube, and have used them at work (they have them in stock), so I already knew what I was buying. Haven't tried them on something other than aluminium, yet, but I know it will perform beautifuly! The one lost star is because, even though all tungstens were in pristine condition, the box itself was banged up and even when closed, I have to hold it upside down to prevent rods from slipping out. I don't really care because I know I'll be able to just ask for an empty box at work eventually, but others might not have this opportunity, so it needed to be said. I totally understand that this must be a shipping problem rather than a seller one, but it happenned, so... All in all, though, exactly what I wanted, and I know those will be usefull in the future.