Moisture Trap & Water Separator for Paint Gun 1/4" NPT | Inline air dryer, push-button drain valve, HVLP sandblaster, plasma cutter, AI303-C1 filter

This is a great little filter/dryer! I purchased this air dryer for use with an old 3-gallon horizontal air compressor that a friend gifted to me, and which I use for low-flow applications. Rather than installing the dryer right at the tool, where if would increase the overall size of the tool and could be snagged, or be subject to the weight of the hose, I installed it at the compressor outlet quick coupler, where it is out of the way and not subject to excessive pulling. When I'm done with the task I simply rotate the dryer around so that the drain button is at the low end and press the button to expel the condensate. Quick, easy, totally effective, and great value.

works great and was easy to install. The filter has reduced the amount of condensation in my air take and seems to be well built with no issues.

The first filter worked well but there must have been a manufacturing defect because it blew apart after a few weeks. I run a 135 psi mcgraw compressor from harbor freight and the filter is rated to 150 psi. The air is very humid where i live and the filter kept a lot of water out of the line. I contacted the manufacturer and his first question was if anyone was hurt. Luckily no one was near the compressor. He proceeded to refund my money and overnighted a new filter to me. Great service!

Works great a clearing the water out of the air line

I always use upstream oil-water filters but nonetheless I believe this did an awesome job on any that might have formed in the line as I did three panels in Texas humidity and no water issues

Very good item. I used as the last step of water entrapment in my air compressor system. It worked great.

Leak at point between air release button and body of unit. Both ordered at different times. First one appears to be great, installed with ease, no leaks and does a good job eliminating moisture. Second unit leaks to the point that it is unusable. Unfortunately the bad unit sat on my desk for too long, and wasn't returnable. I hope the company makes it right. Only 50% worked. Not satisfactory at all. UPDATE - I was contacted by the seller who will replace the defective unit. Changed from 2 stars to 4 stars due to sellers response. After install will update review if necessary. Exemplary Customer Service. The company was quick to make things right. Cannot say enough for them. Used on two compressors. Both units in a 1800 sq ft shop, 1 upstairs and 1 downstairs. Both work just fine. If your looking to keep your airtools and plasma cutter running smooth, keep your air clean. These do the job Thank You

It works but the discharge valve appears to have corroded shut after about 5-6 hours of use on a paint gun. A bit better than purely disposable - but for me it is also disposable. YMMV

Installed one of these and it definitely traps moisture, drained the compressor and used this as defence Works

15年前に取り付けたものがエアー漏れするようになったので交換しようと思い検索していたらアマゾンにあった。 安くは無い商品だが、ほかの店には無いし、安心して使えるので◯。

Macht was es soll. Verarbeitung super

The product is totally amazing and works even better than described, highly I would recommend for all, a must have industrial product. Made in Taiwan the quality is amazing. Do not miss out on this in line filter from le matec.

今まで近場のホームセンターで硬いプラスチックのフィルターを買ったり、塗料販売店から仕入れたりしてましたが、アマゾンでこの価格で購入できて、しかも丈夫な商品んでありなからほぼ 1mp( 一馬力)のエアーの量が通る 津ぐれもの！ 使い初めですが、いい商品だと思います。 塗装メインの仕事には最高なアイテム。 オススメです。