BlueStars 341241 Dryer Drum Belt Compatible with Whirlpool Kenmore Dryers | Replaces 8066065 AP2946843 W10127457 PS346995 14210003 31531589 31001026 3394651 529597

Great quality! Easy fix. Fit on my whirlpool dryer no problem.

My dryer belt broke and needed to be replaced, so I looked up the part number and searched Amazon. I found this belt, which I had actually replaced about 6 years ago, so I decided to order it again. Delivery was quick through Amazon Prime. I also found a video online showing how to replace the belt on my dryer model, so I started disassembling the dryer myself. During the repair, I had to remove the drum because I noticed the spring roller guide near the motor had shifted out of place. I put that back where it belonged, reinstalled the drum, and then placed the new belt around it. From there, I had to work my way to the back of the motor, connect the belt to the motor pulley, and pull the spring-loaded roller guide tensioner back into position so the belt would have the proper tension. Overall, this should work fine. The last belt I replaced lasted about 6 years, so I’m hoping this one gives me a similar lifespan. The price is very reasonable, and with labor and the cost of a new dryer being much higher than before, DIY belt replacement is definitely the way to go. I’d also recommend checking the roller guides during the repair to make sure they’re still in good shape and spinning properly, since replacement rollers are available too. Do look up what your belt part number is for replacement. This belt fit my model well and is perfectly compatible. After replacement, it works the same without any noise increase compared to before. Now how easy is it to replace really depends on your make & model.

Our older dryer stopped working so we decided to attempt repair ourselves. The clothes weren't drying because the drum stopped turning. Instead of hiring repair service or buying new, the price of this belt was good enough to attempt ourselves. With no experience in appliance repair, we were able to find a video to show correct disassembly of the unit. We found our suspicion was correct as the old belt had broken. *it was OLD. After 5 minutes to disassemble, 10 mins to clean dust and lint, 10 mins to install new belt and reassemble- our dryer works again. Super glad we tried this first.

Perfect fit nice and sturdy

I am sure it is a good belt but it was given to me for a Maytag Dryer MCE8000AYW as the perfect fit. I put it on and after a couple spins, SNAP. Needless to say I was sad, defeated, and felt bad I had put the poor new belt under so much pressure. RIP belt, you deserved better.

Be aware, your old failed dryer belt may be stretched out and won't measure what it's supposed to when new! This happened here, the blower and drum both run off the same drive motor in a basic laundry dryer. Ours had got some.sand and pebbles from river and camping which wedged in the blower housing and stopped the motor from spinning properly... It would turn a bit, then skip a bit and so on-- this caused damage to the belt like abrasion and partially cut or wore thru the rubber so when removed it measured about 2in longer than this #341241 and the numbers on the OEM belt were worn away.. so maybe double check you own repair project before ordering but be assured- for a basic front load whirlpool this is the correct size and the price is right! Also, be aware, the new belt is tricky to install by yourself, an extra set of hands could be helpful....I worked alone and had to use a couple.blocks of wood to support the drum while wrestling the belt onto the tensioner pulley, it will be much tighter fit than the old worn out belt! Good luck, enjoy dry laundry!

Part came next day and fit perfect. Easy to install , quick cheap fix!

Get it on time and easy installation

Perfect fit, dryer works now

Came quick and works perfect!

Exactly as described and fast shipping.

Terrible product. Spend a few more bucks and buy from a site that sells OEM parts. This one came apart after not even 6 months of use. And there are only 3 of us using it, so there isn’t an excessive amount of loads being done. This is what it looks like after just over 5 months of use.

Worked well. my dryer is turning, no problems fitting the belt on the dryer drum If I still have this dryer and it needs a replacement belt. I would buy this one again