MEPRO Tru-Dot tritium Night Sights Compatible with S&W M&P Green tritium dots Glow on Sight self Illuminated Meprolight Fixed Metal high Durability Sights

I used a sight pusher to remove the factory front sight. I put the Meprolight sight in the freezer for an hour then using a brass punch and a hammer easily installed it. The white dot on the Meprolight is sized perfectly for the factory rear sights which i did not replace. Its an added bonus that the sight glows bright green when the lights are out. These sights are excellent and a great economical upgrade to the Bodyguard.

This set of Tritium sights is much better than the Night Fission and Tru Glo sights I recently bought.I just bought a TruGlo set from an Ebay seller that was dim and hard to see in daylight.These sights have a bigger white ring around the rear and front glow tubes, they are brighter in the dark.Makes it much easier to see down range.

Very nice sights. Put these on my S&W M&P Shield 9mm. Original sights were the tightest sights I've ever taken off. These installed relatively easy. Make sure you use a sight pusher. If you use a punch to put them in, you may likely break the small glass capsules that hold the tritium.These are very bright sights. Tritium is definitely the way to go and these are the cheapest true tritium sights I've seen. They are made to fit all the M&P guns. The Shield is the most narrow and these sights go all the way to the edge. Sometimes, you can catch the very corner of the sight with your hand when cycling the slide. It's not bad by any means, I just wish they wire a tad more narrow. If I was doing them again, I would likely take a small stone to the corners and smooth them some.Caught them when they were on sale for $66 and put them on my Shield 9mm. If they drop to that price again, I'm in for two more sets (hint to the seller).

Easily installed, and improved accuracy and night visibility. Rear sight slid right on the S&W 10mm, but could not endure the 10mm pounding. Came loose and fell off-- somewhere. Used Loctite on set screw, but fit was just too loose. Would still buy again because material is of very high quality, but it would take some serious professional gunsmithing to keep the sights on 10mm.

I purchased these sites for my S&W M&P 9mm about a year ago and loved them. So I purchased a second set for my wife's identical S&W M&P 9mm. I paid a professional gunsmith to install the sites. After bringing the gun back home, I realized the front site was not glowing anywhere near as bright as the rear sites, less than 20%. I contacted the seller, Primary Arms. They referred me to "The MAKO Group" (Meprolight). They sent me an RMA and indicated that I had to remove the sites, send them back to them, then they would send me a replacement if they agreed with my assessment. I was not happy with that arrangement so I contacted Primary Arms and explained the situation. However, they indicated that I had no other choice but to either go along with The Mako Group requirement, or, remove the sites, return them to Primary Arms, they would give me a refund, and I would have to place another order.In my opinion, they should send me another front site only and then allow me to return the defective front site. But instead, I now have to take the gun back to the gunsmith, have him remove the defective sites, ($20.00) install my OLD sites, send the defective sites back, place another order, and HOPE the new sites are not defective, take the gun BACK to the gunsmith and pay ANOTHER $20.00 to have the replacement sites installed.This is not acceptable to me, so I will be returning the defective sites and hope I get my money back. And then, start over and try to find a company that will stand behind their product and do the right thing for their customers. So just now, that if you do business here and are unfortunate enough to receive a defective product, you too will have to jump through hoops of fire in order to get the matter resolved. So bottom line, the night sites are awesome, when they work.

I purchased these in January of 2016, and it's now December 2023 - eight years later.They are tritium, so they're not as bright as they were when new, but they're still at least twice as bright as any of my non-tritium sights after five minutes in the dark, even when I "charge" the others with a powerful flashlight beforehand.The fit is fine - they're sights, so it's not like I expected intricate machining; they're exactly the dimensions they should be and have held zero through the ~5k rounds I've put throough that pistol since they were installed. The finish applied to these is matte, and shows "scuffs" fairly easily, but it has held up just fine. I keep that pistol in a leather OWB holster; the rear sight is exposed and the front sight contacts the inside of the holster. There is no apparent wear on either.I plan to do some testing in the near future to compare the brightness of my eight-year-old sights with a brand new set in both the visible and IR spectrums - I'll try to remember to update this review with those results.Bottom line: this was a great purchase for me, and I remain 100% satisfied with them.

Wwwaaaaaaayyyyyyyyyyyy brighter than my tricon and my vtac sights on my m&p9. Fit perfect glow super bright at night and really easy to see, day time just as good traditional 3 dot set up but the dots are bigger than others. I love these sights they are now my goto brandUPDATE recent trip to the range and 500 rounds has proven these sights truat worthy. Extremely accurate on my mp9 vtac. These sights are point of aim accurate not 6 o'clock hold . Where the dots line up is where the round goes everytime. perfect combat sight picture im use to. I feel very confident in these sights and are now my everyday carry