X-PRO 50cc Adult Moped Gas Moped Motorcycle 50cc with 10" Aluminum Wheels, Electric/Kick Start! (Blue, Factory Package)

Shipping was quick and it arrived earlier than expected. Shipping comes through R&L and its shipped from Carrollton,Texas. The shipping company calls in advance to notify of delivery and make sure a adult will be available to sign for it. Unboxing is easy and internal steel frame in the box protects the bike from damages during the shipping process. I found the hardest part was getting the steering bolt through and the nut on without dropping both several times. Easiest way is to make sure the forks are unbolted from the boxing frame. Turn to the side after getting the bolt started and through, then put the nut on and tighten down. Front tire and brake are easy to get on and align. Put on center stand and lift center front with low profile jack. Then put a support under. Make sure to space the brake caliper apart so rotor will slide in the slot of the caliper with ease. Place the inner spacer that came on the wheel bolt in the caliper side of the wheel with a slight bit of bearing grease. Now slide wheel side with rotor into the caliper and place the wheel bolt through the fork with the caliper attached and over the rotor about half way into the wheel through the fork after lightly greasing bolt. Now align the speedometer into the other side of wheel after lightly greasing the hole it fits in. You can turn the fork alignment on this side of the wheel by hand and align the wheel with fork hole so you can press the wheel bolt through the speedometer attached side of the wheel the rest of the way. Now install and tighten the nut down. Now pull the floor mat back and unscrew the battery cover. Pull new battery out and unwrap it and the hardware for the battery. Install cables to battery. Reinstall cover and floor mat. Now install the mirrors from the box and tighten in place as necessary. Attach the back storage box with the hardware provided from inside to the predrilled holes in the brackets on the back. Now change out the engines oil with 10w40 4T motorcycle oil. When removing the plug make sure to set spring and mini filter aside with the bolt. Pull out check Guage and let drain. Place the filter, spring and bolt together and place back in as one assembly. Be sure to start by hand so you don't crossthread the boltand filter grommet stays inline and seals correctly. Now add approximately 700ml of oil back to motor and put check gage back in. Pull out and check that the level is in the cross hatches and retighten back into the motor. Now add mid grade or premium gasoline to the gas tank. It took me a minute to get it started the 1st time. I had to make sure fuel had flowed through the see thru gas filter and then lightly squeezed the fuel line from there to the carburetor to a little bit primed. From here I had to adjust the throttle cable slightly at the handle grip. Be sure key is now placed to on position and fuel switch is turned on. Pull brake handle and give slight gas while hitting start button. My bike start 100% with no issues every time now within 2 clicks of the starter. Rides great and works perfectly. Would I recommend a purchase? Yes. Its a great deal.

I had a perfect Tao Tao 50cc a year or so ago. Trim was not perfect. BUT the Maui from X-Pro has differences that make it WAY easier to put together. It might take two people to put the front wheel on BUT if you turn the handlebars a bit to the side, the fork will snap in over the wheel like a pro! That is the hard part. The owner's manual is weak. Look up GY6 scooter repair manual online. It is free and covers any 50cc Chinese scooter. MUCH BETTER THAN THE MANUAL that this company sends. They really need an upgrade on the manual. Before you think something does not work, look up the instructions on YouTube. The instructions can be tricky and one needs patience but these guys are as helpful as possible. Their shipping to northern Maine was EXCELLENT. They will work to please you BUT are not mechanics. You will need more instructions than they supply. You will need a friend that knows something or the patience to look up everything you question online. Outside of the fact they do not know the mechanics of this scooter, THEY ARE AN EXCELLENT COMPANY TO WORK WITH. Do it on Amazon Prime for complete delivery coverage and any broken stuff. The scooter company will replace parts but Prime will refund your money if you need a repair person. Prime covers delivery damage too--anything within a month. Mine has been perfect so far.

I purchased this product a year ago and mechanically it runs fine but there have been so many electrical problems that I’ve had to re-wire pretty much the entire scooter.

I got my xpro moped and rode it 12 miles and it stalled .. now it won't run and stalls right out ...but after buying my own carburetor it runs just fine ...

Runs perfect, Good shipping. I want to emphasize on the communication from the seller was good. They were transparent with everything as far as receiving the title and shipping. I have 100 miles on it. It took me 3 days to get it complete but I worked on it slow. For a complete beginner with hand tools expect about 4-5 hours if everything goes correct. I hope the thing last me but so far so good.

I purchased this for my husband and it definitely works great, it arrived earlier than expected, but there was a crack in the side panel ,the customer service has been amazing from this company I reported the crack and they sent a new side panel that arrived very quickly, it has a sleek design and great value for the money, the only thing I would change is that since there's a USB adapter on the front, they could possibly add something to hold your phone when riding and using it as a GPS.

Q el papel para registrar la moto vino antes de la entrega del paquete y me llamaron para avisarme un día antes de la entrega del paquete y la moto funciona bien y gracias por la atención…

After setting everything up we noticed that after about a minute the moped shuts off making riding not possible for any longer than that also the throttle also got stuck twice making the bike go way to fast during the rides.Continue:The most recent problem is the opposite of the one before instead of the throttle getting stuck and the moped driving to fast it won't throttle at all and the moped won't move despite being on and running. This isn't a safe moped and since it's non returnable they are trying to keep my money.Do Not Buy!! its Junk. I'm hoping to get my money back but I might just have to sell it at a loss.