CLEAR ADHESIVE GLUE FOR PP Polypropylene, PE Polyethylene, PTFE, Silicone

I bought this as I'd previously bought and used the 'usual' makes of glue which stuck with varying degrees of success and often were difficult to use (with the activator pen, etc) and dried the cap to the tubes quickly (or the glue dried out completely in the tubes).This glue comes in two glass bottles, each of which is applied with a brush which is much easier and more precise to apply (no spurting from the tube) and the glue seems to bond the PP/PE/PTFE parts really well.Recommended.

I used this to construct a cover made from 1mm thick PP. I slightly roughened the surfaces with sandpaper, applied a generous coat of primer to each surface, allowing them to dry for a few minutes before applying a thick coat of glue to one surface then clamping and leaving for a few hours. The joins are under tension and are holding well.

High price, no better than superglue available from local DIY store

Nothing bonds PE, and this turned out to be no exception to that rule. I was disappointed because this glue was specifically claimed as being suitable for PE. When I put the primer on, the plastic smoked and hissed, so I certainly got the impression it was doing something. I clamped the join for 24 hours, and it seemed to have set. But the slightest pressure and the bond broke. I guess this glue might be OK on PE if the bond does not have to bear any stress.I'm disappointed, but hardly surprised. Nothing bonds PE.

My car has a colour coded bumper which features a black trim insert. The insert locating lugs got broken when someone hit the car, resulting in a loose trim. I was a bit sceptical at first, but using this glue and base primer, I was able to re-attach the trim which has now held in place for a couple of months without any signs of it coming off. Plenty of the product left over for any other bits that might need doing, although hopefully not!

excellent . worked on fixing PP container. very satisfied and arrived promptly

I bought this to glue a silicon watch strap, and so far so good.I tried it on a silicon wrist band first and it did the job

As unreliable as simple other cyanoacrylate adhesive, Primer liquid called BASE does nothing special on helping glueing PP materials. Polypropylene can not be glued with anything. Neither hot melt guns.