I/O Crest M.2 NGFF PCIe SSD to PCI Express 3.0 x4 Host Adapter Card - Support M.2 M-Key PCIe (NVMe or AHCI) Type 22110, 2280, 2260, 2242

Been using two PEX40115's for 3 years now in different machines. Anticipate using the spare I bought in yet another machine so back here again to acquire another spare. Just realized I'd never left a rating/review. It's easy to forget to do that when things work so well right off the bat and then continue to work well for so long.My use: Perfect use of my sole remaining PCI-e x1 slot to add allot of M.2 SSD storage to an already small Dell tower that's not designed to hold allot of storage devices.Jan 2022SI-PEX40116 - bought this long ago and only today found a system to put it in. Other systems only had x1 slots available. At first it didn't work at all but that might have been a seating problem. I have 4 2TB SSD's on the card. Removed 2, started working. Added the other two back and carefully/firmly seated the card - now all 4 work. These don't seem to be available any more but just in case someone gets one and decides to fill all 4 slots, don't be dumb like me and think too hard about the mounts. There are no instructions and it did not dawn on me that ALL 8 of those tiny screws were needed. Two screws for each SSD. One to mount the spacer and the other to hold down the SSD.I had ended up using some longer screws to secure the SSD. Looking from the side it just didn't look nice and neat. I bought a spare recently and practiced some more on it when I realized if I used all 8 screws then it was super simple to mount all 4 SSD's neatly.

I built a Windows 10 NAS using an old Intel motherboard with built-in RAID and 5 SATA ports. I used all 5 SATA ports for the RAID array and put Windows 10 on a USB3 flash drive to boot. As expected, the system booted and responded excruciatingly slowly, but it worked very well as a NAS. Then I decided that the system could do so much more (Core-i5, 16GB RAM), but Windows performance on the USB drive was just not acceptable. So I got one of these and paired it with a Trancend 64GB SSD Transcend 64GB SATA III 6Gb/s MTS800 80 mm M.2 Solid State Drive (TS64GMTS800) and the results were better than I expected! Using Reflect to clone the USB drive to the SSD, Windows 10 had no trouble recognizing the device, and the new system drive booted right up without a hitch. I couldn't be happier and the performance is astounding! So good in fact that I'm planning to fit this combination to a couple more systems.

This device is an excellent little device for reading an NVME in an older computer. I used it to connect an NVME to my Dell PowerEdge R610 server as well as an extra NVME slot on my desktop.It works well, NVME reaches rated speeds, etc. A bit slower on PCI-E 2.0 but that is expected and it is still about twice as fast as a Sata SSD.

The product seems to work OK but the screw and nut provided to mount the SSD simply don't fit and don't work no matter how you try. One would think that it would be very hard to screw up such a simple thing. But these guys did it. I had a hard time hunting up a screw and nut to secure the SSD in the slot. Absurd!

With the prices on M.2 NVMe chips falling through the floor, I want to add an M.2 NVMe chip to every computer I can.Unfortunately, only the newest motherboards have PCIe M.2 slots. I first tried using this board to install an M.2 chip in a Dell Optiplex 9020. When I installed WIndows 10, the installation saw the chip and allowed me to install to it, but the joy ended there, it was not bootable! If I install WIndows 10 on another SATA disk, boot to it, the windows installation will see the M.2 chip, it is considered a Mass Storage Device, but no way to make Optiplex 9020 boot to it.Next, I added it to Dell Precision T5810, now this was a totally different story! As before, I could install Windows 10 to the M.2, but then would not boot. I then updated the BIOS to the very latest, once it rebooted, voila! Windows 10 booted from the M.2 chip on the adapter board!After Windows 10 was up and running I ran Crystal Disk Mark speed test, was only getting about 1500 MB/s read speeds, not bad, but still way below the rating of the M.2 chip. Turns out I had installed the PCIe M.2 adapter in a slower PCIe slot, moved it to a faster slot, rebooted and ran Crystal Mark Disk check again, this time 3400 MB/s, awesome!Moral of story, make sure your PC or motherboard will boot from an M.2 chip mounted on this board, then buy it!And for a great deal on what has so far has been a very impressive M.2 NVMe chip, I can just say 2 words, Inland Premium. Search Amazon for Inland Premium, I chose the 512GB version, have installed at least 10 or more of these, working great so far. Or, you could go for the chip made by the company famous for its failed folding phone and pay over twice as much and get just marginal better performance, choice is up to you!