King Kooker WKAF1B High Pressure Burner with Orifice Block

King Kooker WKAF1B High Pressure Burner with Orifice Block

Q: How long is the stem on this burner from where the round burner connects to the stem to where the stem ends at the regulator connector?

I just measured mine to be sure. Mine measures 7 in (17.78 cm) from the center of the burner head to the end of the stem.

Q: Does this need a thermocoupling? Where does it go?

I don't know what is thermocoupling is. I have install it in to bric oven I use the gas to preheat the oven and then add wood for flavour

Q: what btu is this? can i connect this to a low pressure regulator? is it safe to do so? the regulator i have is about 80,000btu.

I did connect it to a low fixed-pressure regulator. The only problem was that I didn't get the heat output needed to boil 10 gallons of water, water got hot but did not boil. I don't know what my low pressure regulator was pre-set to, probably about 0.6 psi. I bought and connected the burner to an adjustable regulator (0-30 psi) and it worked much better. Didn't need to set it to the full 30 psi. 30psi of propane is a LOT of gas. Another burner of similar design has a 150,000 BTU capability. That means that if you can pump 150,000 BTUs of propane per hour, this burner will handle it. But rarely will you ever need it. I believe your regulator has the capability of passing enough gas to burn 80,000 BTUs of propane per hour. So, it should work.http://www.gashosesandregulators.com/propaneregulatorfacts.html

Q: King kooker wkaf1b high pressure burner with orifice block fit a king kooker 24wc/092015/po#257009

Can't answer it with any definite certainty. I can tell you this. It has a single bolt at the bottom that requires a nut to attach it to the frame of the cooker. If the King Cooker has a different mounting method, I would doubt that it would physically fit without some modifications to the King Kooker frame. My research says that the 24WC has a low pressure 54,000 BTU burner. This is a 150,000 BTU burner and requires a high pressure regulator. The regulator that comes with the 24WC is a low pressure regulator. So, in my opinion, I don't think it will fit.

4.6/5

Product ID: 408548184

Secure Transaction

Frequently Bought Together

King Kooker WKAF1B High Pressure Burner with Orifice Block , Gray

King Kooker 06502 Double Hose & Regulator Assembly,Multi

Description

King Kooker WKAF1B High Pressure Burner with Orifice Block

Specifications

Manufacturer	King Kooker
Item model number	WKAF1B
ASIN	B0047O3PRK

Have a Question? See What Others Asked

How long is the stem on this burner from where the round burner connects to the stem to where the stem ends at the regulator connector?

Does this need a thermocoupling? Where does it go?

what btu is this? can i connect this to a low pressure regulator? is it safe to do so? the regulator i have is about 80,000btu.

King kooker wkaf1b high pressure burner with orifice block fit a king kooker 24wc/092015/po#257009

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

528.82 DT

Duties & taxes incl.

Tunisiastore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews