RAYANA7/8" 22mm Motorcycle ATV Handlebar Control Switch on/Off/on Button Waterproof for Headlight Fog Light 12V

I got this for a 1975 Honda XL250. I disassembled the original horn / turn signal / hi-lo headlight switch to clean it up, but the contacts on the hi-lo beam selector were beyond repair. I got this toggle switch to use as a substitute switch for the headlight selector function. The wiring harness duplicated one of the harnesses that comes out of the stock switch housing. I just sealed the terminals of the old harness and ran it near the original location on the main wiring harness. I mounted the new switch near the stock switch (to the right, with the mirror mounted between them) and ran the harness alongside the now-nonfunctioning one, attached bullet connectors to the wires, and plugged them into the terminals that were now open from the old switch. This switch looks discreet and doesn’t look out of place. I didn’t have any quality or fit issues that others have reported. I’m very happy with this purchase, especially for the price and because I still have the original switch (now only for horn and blinkers).

Seems well made. No wiring diagram , blue is the power wire. I used these for heated grips

Had to seal up the hole where the cord comes out so it's totally water proof. Otherwise works great.

Only 1 mode worked.

Worked as shown on ad. Easy to install. No wiring diagram, but simple enough to figure out.

Works great as long as you power your lights through a relay and had the toggle used to power the relay. Lights pull to many amps and heats up the wires if you try wiring the lights directly through the switch.

We used this to control an aftermarket headlight on a dirt bike and works great to switch from off to low beams to high beams. Would definitely recommend. Exactly what we needed.

Works great the only inconvenience cable length too short.